v02.01.01.52-ls92

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v02.01.01.52-ls92/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

V2.1.1 is a minor version based on V2.1.0, mainly fixing some issues found in V2.1.0.

Improvements

1. Supported for setting a flow ratio for individual object (available in developer mode). Thanks to @RyanHir for the contribution.

Bug Fixes

1. Fixed the issue where the build plate did not heat synchronously with the chamber temperature during calibration in H2D. (#7054)
2. Fixed the problem of Brim being mistakenly generated outside the build plate area. (#7088)
3. Fixed the issue of Brim overlapping with Skirt in some cases.
4. Fixed slicing crashes when using support material for certain models with narrow overhangs in normal support mode.(#7204)
5. Fixed slicing errors for single multi-color part in by-object mode. (#7121, #7092, #7146, #7183, #7229, #7247)
6. Fixed the issue where third-party preset synchronization could cause crashes, and also fixed errors in parsing and displaying certain parameters. The corresponding flush temperature parameter option has been temporarily disabled.
7. Fixed several typos and text errors. Thanks to @eried and @maximeconnolly for their contributions.

v02.01.00.59-ls92

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v02.01.00.59-ls92/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

Known issue

Incorrect flush parameters in H2D custom filaments: For custom filaments created in versions prior to V2.1.0, the volumetric speed and temperature settings used during filament change flushing may be incorrect. Please update the preset to version 02.01.00.15 to avoid this issue. We will address the remaining related issues in the next version.

Feature

1. Added Locked Zag infill pattern, which is a filling structure that balances appearance and strength, consisting of two parts:

• Skin: Wraps around the model's outer contour using Cross Zag texture to ensure surface quality consistent with standard Cross infill, enhancing aesthetic appeal.
• Skeleton: Utilizes Zigzag texture for the internal structure to increase strength.

To address the issue of interrupted infill generation caused by varying density or line width parameters in different regions due to the model's contour being segmented, Locked Zag provides four parameters to ensure continuity between different areas when changing the selected density and line width. This is illustrated in the following diagram.

Improvements

1. Optimized the "Avoid crossing wall" feature : After optimization, some models will have reduced stringing.(bambulab/BambuStudio#6597)

2. Added printer list search functionality on Windows platform : This feature makes it easier to quickly locate the desired printer.

3. Optimized the extruder movement during timelapse: With this feature, the unnecessary travel and noises from the filament cutter stopper are reduced.
4. Improved computation efficiency in Arachne mode: A new overhang calculation method is implemented which significantly accelerates the wall path generation. (#6634 )Left is V2.1.0 and right is V2.0.3.

5. Added support for printer synchronization for single-nozzle models (including X Series / P Series / A1 Series): With a single click, the selected printer’s model and nozzle information on the device page can be synchronized, helping users quickly start a slicing task.

6. Added support for copying print settings from one object to another.

7. Added parameters for flush and tool change during filament swaps: This includes flush temperature, flush volumetric speed and retraction distance when changing extruders.

8. Optimized the "Send print job" Dialog:

• UI optimizations: Adjusted the layout and converted advanced options to segmented buttons, with added nozzle info display.

• Refined the external spool mapping logic: This change allows mapping when external filament type differs from the slicing filament type, with added confirmation dialog to reduce operation complexity.

• Improved auto-mapping logic for external spools：When the machine has only external consumables, the slicing consumables can be automatically matched according to the consumable matching rules.(#6534, #6540 , #6850 , #6803, #6203)

9. Added support for exporting slicing paths as .OBJ files.

10. New Precise Wall feature (available in developer mode) : This new feature improves dimensional accuracy and inter-layer consistency by adjusting the gap between outer and inner walls. Thanks to OrcaSlicer for the contribution.

11. Updated retraction parameters for Bambu PLA (excluding AERO and Sup for PLA) and Bambu PETG HF on H2D models with 0.4/0.6/0.8 mm nozzles, reducing stringing and improving print quality on large nozzles.

12. Adjusted volumetric flow speeds for Bambu PLA Basic, PLA Matte, and PETG HF on H2D models with 0.4/0.6/0.8 mm nozzles.

13. Based on testing, we advanced the fan pre-start time by 2s for PLA and PETG on the A1/A1 mini to improve cooling performance during printing.

14. Added support for slicing multiple TPU models on the same build plate: Multiple TPU materials can now be sliced together on a single plate with pause G-code inserted. All TPUs are mapped to external spools for printing, and the print can be completed by manually changing filaments during the printing process.(bambulab/BambuStudio#6834)

15. The URL handler now supports opening files from third-party sites with an added confirmation step. Thanks to @LightDestory for the contribution.

16. Updated partial Turkish translations. Thanks to @fatih5228 for the contribution.

17. Optimized Filament List on Preparation Page:

• Introduced a two-level category structure to improve selection efficiency.
• Added support for displaying unsupported filaments based on the current configuration.

18. Optimized MQTT connection experience.

19. X1/X1C/H2D now support file transfer via TCP in both public network and LAN modes.

• X1/X1C: firmware version must be 01.09.00.00 or above.
• H2D: firmware version must be 01.01.00.00 or above.

20. Added a folding button for preset tab on the Prepare/Preview page, with the possibility to use Shift+Tab as a shortcut.

21. HMS Updates:

• Renamed to Assistant (HMS);
• Added new HMS messages;
• Fixed errors in some HMS action points.

Bugs Fixed

1. Fixed incorrect infill path in narrow internal areas of some models.(bambulab/BambuStudio#6582)
2. Fixed incorrect layer height restrictions for various nozzle sizes on H2D models.(bambulab/BambuStudio#6647)
3. Fixed missing anchor lines beneath bridges in some models.(bambulab/BambuStudio#6698)
4. Fixed abnormal flush volume dialog display when Bambu Studio is installed in a non-default directory.(bambulab/BambuStudio#6739)
5. Fixed quality issues caused by incorrect filament tower retraction values.
   (bambulab/BambuStudio#6733, bambulab/BambuStudio#6730)
6. Fixed slicing failure when entering abnormal values in the height modifier.(bambulab/BambuStudio#6755)
7. Fixed incorrect timelapse lift path calculation for H2D models.(bambulab/BambuStudio#6869)
8. Fixed false error when printing TPU 90A on P/A series printers.(bambulab/BambuStudio#6930)
9. Fixed inconsistent behavior of auto orientation between GUI and CLI.(bambulab/BambuStudio#6092)
10. Added support for merging sub-objects into "sub-merged bodies".(bambulab/BambuStudio#5855)

...

v02.01.00.59-ls91

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v02.01.00.59-ls91/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

Known issue

Incorrect flush parameters in H2D custom filaments: For custom filaments created in versions prior to V2.1.0, the volumetric speed and temperature settings used during filament change flushing may be incorrect. Please update the preset to version 02.01.00.15 to avoid this issue. We will address the remaining related issues in the next version.

Feature

1. Added Locked Zag infill pattern, which is a filling structure that balances appearance and strength, consisting of two parts:

• Skin: Wraps around the model's outer contour using Cross Zag texture to ensure surface quality consistent with standard Cross infill, enhancing aesthetic appeal.
• Skeleton: Utilizes Zigzag texture for the internal structure to increase strength.

To address the issue of interrupted infill generation caused by varying density or line width parameters in different regions due to the model's contour being segmented, Locked Zag provides four parameters to ensure continuity between different areas when changing the selected density and line width. This is illustrated in the following diagram.

Improvements

1. Optimized the "Avoid crossing wall" feature : After optimization, some models will have reduced stringing.(bambulab/BambuStudio#6597)

2. Added printer list search functionality on Windows platform : This feature makes it easier to quickly locate the desired printer.

3. Optimized the extruder movement during timelapse: With this feature, the unnecessary travel and noises from the filament cutter stopper are reduced.
4. Improved computation efficiency in Arachne mode: A new overhang calculation method is implemented which significantly accelerates the wall path generation. (#6634 )Left is V2.1.0 and right is V2.0.3.

5. Added support for printer synchronization for single-nozzle models (including X Series / P Series / A1 Series): With a single click, the selected printer’s model and nozzle information on the device page can be synchronized, helping users quickly start a slicing task.

6. Added support for copying print settings from one object to another.

7. Added parameters for flush and tool change during filament swaps: This includes flush temperature, flush volumetric speed and retraction distance when changing extruders.

8. Optimized the "Send print job" Dialog:

• UI optimizations: Adjusted the layout and converted advanced options to segmented buttons, with added nozzle info display.

• Refined the external spool mapping logic: This change allows mapping when external filament type differs from the slicing filament type, with added confirmation dialog to reduce operation complexity.

• Improved auto-mapping logic for external spools：When the machine has only external consumables, the slicing consumables can be automatically matched according to the consumable matching rules.(#6534, #6540 , #6850 , #6803, #6203)

9. Added support for exporting slicing paths as .OBJ files.

10. New Precise Wall feature (available in developer mode) : This new feature improves dimensional accuracy and inter-layer consistency by adjusting the gap between outer and inner walls. Thanks to OrcaSlicer for the contribution.

11. Updated retraction parameters for Bambu PLA (excluding AERO and Sup for PLA) and Bambu PETG HF on H2D models with 0.4/0.6/0.8 mm nozzles, reducing stringing and improving print quality on large nozzles.

12. Adjusted volumetric flow speeds for Bambu PLA Basic, PLA Matte, and PETG HF on H2D models with 0.4/0.6/0.8 mm nozzles.

13. Based on testing, we advanced the fan pre-start time by 2s for PLA and PETG on the A1/A1 mini to improve cooling performance during printing.

14. Added support for slicing multiple TPU models on the same build plate: Multiple TPU materials can now be sliced together on a single plate with pause G-code inserted. All TPUs are mapped to external spools for printing, and the print can be completed by manually changing filaments during the printing process.(bambulab/BambuStudio#6834)

15. The URL handler now supports opening files from third-party sites with an added confirmation step. Thanks to @LightDestory for the contribution.

16. Updated partial Turkish translations. Thanks to @fatih5228 for the contribution.

17. Optimized Filament List on Preparation Page:

• Introduced a two-level category structure to improve selection efficiency.
• Added support for displaying unsupported filaments based on the current configuration.

18. Optimized MQTT connection experience.

19. X1/X1C/H2D now support file transfer via TCP in both public network and LAN modes.

• X1/X1C: firmware version must be 01.09.00.00 or above.
• H2D: firmware version must be 01.01.00.00 or above.

20. Added a folding button for preset tab on the Prepare/Preview page, with the possibility to use Shift+Tab as a shortcut.

21. HMS Updates:

• Renamed to Assistant (HMS);
• Added new HMS messages;
• Fixed errors in some HMS action points.

Bugs Fixed

1. Fixed incorrect infill path in narrow internal areas of some models.(bambulab/BambuStudio#6582)
2. Fixed incorrect layer height restrictions for various nozzle sizes on H2D models.(bambulab/BambuStudio#6647)
3. Fixed missing anchor lines beneath bridges in some models.(bambulab/BambuStudio#6698)
4. Fixed abnormal flush volume dialog display when Bambu Studio is installed in a non-default directory.(bambulab/BambuStudio#6739)
5. Fixed quality issues caused by incorrect filament tower retraction values.
   (bambulab/BambuStudio#6733, bambulab/BambuStudio#6730)
6. Fixed slicing failure when entering abnormal values in the height modifier.(bambulab/BambuStudio#6755)
7. Fixed incorrect timelapse lift path calculation for H2D models.(bambulab/BambuStudio#6869)
8. Fixed false error when printing TPU 90A on P/A series printers.(bambulab/BambuStudio#6930)
9. Fixed inconsistent behavior of auto orientation between GUI and CLI.(bambulab/BambuStudio#6092)
10. Added support for merging sub-objects into "sub-merged bodies".(bambulab/BambuStudio#5855)

...

v02.01.00.59-ls90

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v02.01.00.59-ls90/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

Feature

1. Added Locked Zag infill pattern, which is a filling structure that balances appearance and strength, consisting of two parts:

• Skin: Wraps around the model's outer contour using Cross Zag texture to ensure surface quality consistent with standard Cross infill, enhancing aesthetic appeal.
• Skeleton: Utilizes Zigzag texture for the internal structure to increase strength.

To address the issue of interrupted infill generation caused by varying density or line width parameters in different regions due to the model's contour being segmented, Locked Zag provides four parameters to ensure continuity between different areas when changing the selected density and line width. This is illustrated in the following diagram.

Improvements

1. Optimized the "Avoid crossing wall" feature : After optimization, some models will have reduced stringing.(bambulab/BambuStudio#6597)

2. Added printer list search functionality on Windows platform : This feature makes it easier to quickly locate the desired printer.

3. Optimized the extruder movement during timelapse: With this feature, the unnecessary travel and noises from the filament cutter stopper are reduced.
4. Improved computation efficiency in Arachne mode: A new overhang calculation method is implemented which significantly accelerates the wall path generation. (#6634 )Left is V2.1.0 and right is V2.0.3.

5. Added support for printer synchronization for single-nozzle models (including X Series / P Series / A1 Series): With a single click, the selected printer’s model and nozzle information on the device page can be synchronized, helping users quickly start a slicing task.

6. Added support for copying print settings from one object to another.

7. Added parameters for flush and tool change during filament swaps: This includes flush temperature, flush volumetric speed and retraction distance when changing extruders.

8. Optimized the "Send print job" Dialog:

• UI optimizations: Adjusted the layout and converted advanced options to segmented buttons, with added nozzle info display.

• Refined the external spool mapping logic: This change allows mapping when external filament type differs from the slicing filament type, with added confirmation dialog to reduce operation complexity.

• Improved auto-mapping logic for external spools：When the machine has only external consumables, the slicing consumables can be automatically matched according to the consumable matching rules.(#6534, #6540 , #6850 , #6803, #6203)

9. Added support for exporting slicing paths as .OBJ files.

10. New Precise Wall feature: This new feature improves dimensional accuracy and inter-layer consistency by adjusting the gap between outer and inner walls. Thanks to OrcaSlicer for the contribution.

11. Updated retraction parameters for Bambu PLA (excluding AERO and Sup for PLA) and Bambu PETG HF on H2D models with 0.4/0.6/0.8 mm nozzles, reducing stringing and improving print quality on large nozzles.

12. Adjusted volumetric flow speeds for Bambu PLA Basic, PLA Matte, and PETG HF on H2D models with 0.4/0.6/0.8 mm nozzles.

13. Based on testing, we advanced the fan pre-start time by 2s for PLA and PETG on the A1/A1 mini to improve cooling performance during printing.

14. Added support for slicing multiple TPU models on the same build plate: Multiple TPU materials can now be sliced together on a single plate with pause G-code inserted. All TPUs are mapped to external spools for printing, and the print can be completed by manually changing filaments during the printing process.(bambulab/BambuStudio#6834)

15. The URL handler now supports opening files from third-party sites with an added confirmation step. Thanks to @LightDestory for the contribution.

16. Updated partial Turkish translations. Thanks to @fatih5228 for the contribution.

17. Optimized Filament List on Preparation Page:

• Introduced a two-level category structure to improve selection efficiency.
• Added support for displaying unsupported filaments based on the current configuration.

18. Optimized MQTT connection experience.

19. X1/X1C/H2D now support file transfer via TCP in both public network and LAN modes.

• X1/X1C: firmware version must be 01.09.00.00 or above.
• H2D: firmware version must be 01.01.00.00 or above.

20. Added a folding button for preset tab on the Prepare/Preview page, with the possibility to use Shift+Tab as a shortcut.

21. HMS Updates:

• Renamed to Assistant (HMS);
• Added new HMS messages;
• Fixed errors in some HMS action points.

Bugs Fixed

1. Fixed incorrect infill path in narrow internal areas of some models.(bambulab/BambuStudio#6582)
2. Fixed incorrect layer height restrictions for various nozzle sizes on H2D models.(bambulab/BambuStudio#6647)
3. Fixed missing anchor lines beneath bridges in some models.(bambulab/BambuStudio#6698)
4. Fixed abnormal flush volume dialog display when Bambu Studio is installed in a non-default directory.(bambulab/BambuStudio#6739)
5. Fixed quality issues caused by incorrect filament tower retraction values.
   (bambulab/BambuStudio#6733, bambulab/BambuStudio#6730)
6. Fixed slicing failure when entering abnormal values in the height modifier.(bambulab/BambuStudio#6755)
7. Fixed incorrect timelapse lift path calculation for H2D models.(bambulab/BambuStudio#6869)
8. Fixed false error when printing TPU 90A on P/A series printers.(bambulab/BambuStudio#6930)
9. Fixed inconsistent behavior of auto orientation between GUI and CLI.(bambulab/BambuStudio#6092)
10. Added support for merging sub-objects into "sub-merged bodies".(bambulab/BambuStudio#5855)

12. Fixed slicing failure for certain models.(https://github.com/bambulab/BambuStudio/issues/6935) 13. Fixed issue where contact surfaces between organic and regular supports were not aligned properly.(https://github.com/bambulab/BambuStudio/issues/6925) 14. Fixed incompatibility of Polymaker Fiberon PA6-GF with X series printers.(https://github.com/bambulab/BambuStudio/issues/6769)...

V02.00.03.54-ls89

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/V02.00.03.54-ls89/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

V2.0.3 is a minor release based on V2.0.2, which fixes some issues found in V2.0.2.

Bugs Fixed

1. Fixed an issue where printing could not start with AMS in some scenarios.(#6557)
2. Fixed a rendering issue under Windows Remote Desktop (RDP).(#6536)
3. Fixed a crash when generating normal support in certain scenarios.(#6535, #6616)
4. Fixed an issue causing high CPU usage in certain scenarios.(#6562)
5. Fixed a crash that occurred when exiting Studio in certain scenarios.(#6544)
6. Fixed a startup failure issue on Windows 7.
7. Fixed an issue where inserting temperature change commands into Timelapse G-code extended print times in certain scenarios.
8. Fixed an error where printing with support material on the H2D failed in certain scenarios.
9. Fixed an issue filament presets were not refreshed promptly after AMS Sync in certain scenarios.(#6583, #6197, #6511, #6478)
10. Updated some Russian translations, thanks to @AndylgTom for the contribution.

You can download the flathub version for Linux from Bambu Studio on flathub
The Flathub version is maintained by @hadess. Many thanks to him again for his outstanding work！

V02.00.03.54-ls88

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/V02.00.03.54-ls88/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

V2.0.3 is a minor release based on V2.0.2, which fixes some issues found in V2.0.2.

Bugs Fixed

1. Fixed an issue where printing could not start with AMS in some scenarios.(#6557)
2. Fixed a rendering issue under Windows Remote Desktop (RDP).(#6536)
3. Fixed a crash when generating normal support in certain scenarios.(#6535, #6616)
4. Fixed an issue causing high CPU usage in certain scenarios.(#6562)
5. Fixed a crash that occurred when exiting Studio in certain scenarios.(#6544)
6. Fixed a startup failure issue on Windows 7.
7. Fixed an issue where inserting temperature change commands into Timelapse G-code extended print times in certain scenarios.
8. Fixed an error where printing with support material on the H2D failed in certain scenarios.
9. Fixed an issue filament presets were not refreshed promptly after AMS Sync in certain scenarios.(#6583, #6197, #6511, #6478)
10. Updated some Russian translations, thanks to @AndylgTom for the contribution.

You can download the flathub version for Linux from Bambu Studio on flathub
The Flathub version is maintained by @hadess. Many thanks to him again for his outstanding work！

V02.00.03.54-ls87

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/V02.00.03.54-ls87/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

V2.0.3 is a minor release based on V2.0.2, which fixes some issues found in V2.0.2.

Bugs Fixed

1. Fixed an issue where printing could not start with AMS in some scenarios.(#6557)
2. Fixed a rendering issue under Windows Remote Desktop (RDP).(#6536)
3. Fixed a crash when generating normal support in certain scenarios.(#6535, #6616)
4. Fixed an issue causing high CPU usage in certain scenarios.(#6562)
5. Fixed a crash that occurred when exiting Studio in certain scenarios.(#6544)
6. Fixed a startup failure issue on Windows 7.
7. Fixed an issue where inserting temperature change commands into Timelapse G-code extended print times in certain scenarios.
8. Fixed an error where printing with support material on the H2D failed in certain scenarios.
9. Fixed an issue filament presets were not refreshed promptly after AMS Sync in certain scenarios.(#6583, #6197, #6511, #6478)
10. Updated some Russian translations, thanks to @AndylgTom for the contribution.

You can download the flathub version for Linux from Bambu Studio on flathub
The Flathub version is maintained by @hadess. Many thanks to him again for his outstanding work！

V02.00.03.54-ls86

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/V02.00.03.54-ls86/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

V2.0.3 is a minor release based on V2.0.2, which fixes some issues found in V2.0.2.

Bugs Fixed

1. Fixed an issue where printing could not start with AMS in some scenarios.(#6557)
2. Fixed a rendering issue under Windows Remote Desktop (RDP).(#6536)
3. Fixed a crash when generating normal support in certain scenarios.(#6535, #6616)
4. Fixed an issue causing high CPU usage in certain scenarios.(#6562)
5. Fixed a crash that occurred when exiting Studio in certain scenarios.(#6544)
6. Fixed a startup failure issue on Windows 7.
7. Fixed an issue where inserting temperature change commands into Timelapse G-code extended print times in certain scenarios.
8. Fixed an error where printing with support material on the H2D failed in certain scenarios.
9. Fixed an issue filament presets were not refreshed promptly after AMS Sync in certain scenarios.(#6583, #6197, #6511, #6478)
10. Updated some Russian translations, thanks to @AndylgTom for the contribution.

You can download the flathub version for Linux from Bambu Studio on flathub
The Flathub version is maintained by @hadess. Many thanks to him again for his outstanding work！

V02.00.03.54-ls85

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/V02.00.03.54-ls85/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

V2.0.3 is a minor release based on V2.0.2, which fixes some issues found in V2.0.2.

Bugs Fixed

1. Fixed an issue where printing could not start with AMS in some scenarios.(#6557)
2. Fixed a rendering issue under Windows Remote Desktop (RDP).(#6536)
3. Fixed a crash when generating normal support in certain scenarios.(#6535, #6616)
4. Fixed an issue causing high CPU usage in certain scenarios.(#6562)
5. Fixed a crash that occurred when exiting Studio in certain scenarios.(#6544)
6. Fixed a startup failure issue on Windows 7.
7. Fixed an issue where inserting temperature change commands into Timelapse G-code extended print times in certain scenarios.
8. Fixed an error where printing with support material on the H2D failed in certain scenarios.
9. Fixed an issue filament presets were not refreshed promptly after AMS Sync in certain scenarios.(#6583, #6197, #6511, #6478)
10. Updated some Russian translations, thanks to @AndylgTom for the contribution.

You can download the flathub version for Linux from Bambu Studio on flathub
The Flathub version is maintained by @hadess. Many thanks to him again for his outstanding work！

v02.00.02.57-ls84

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v02.00.02.57-ls84/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

This is version 2.0.2, a minor release based on version 2.0.1, which fixes some issues found in 2.0.1.

From this version, Linux appimage for ubuntu 20.04 is not supported,
You can also download the flathub version for linux from bambustudio on flathub

The Flathub version is maintained by @hadess. Many thanks to him again for his outstanding work！

Improvements

1. Studio device page now supports filament configuration for P1 Series and X1 Series (X1E excluded) printers when connected to AMS 2 Pro and AMS HT.

• Firmware requirements:
  • X1 series version 01.09.00.00 or later.
  • P1 series version 01.08.00.00 or later.

2. Studio also supports connecting X1 Series printers via subnet binding (requires X1 series version 01.09.00.00 or later).

3. Enhanced "Send print job" dialog.

• Print options are now always visible instead of being collapsible.
• The introduction of print options has been changed from always visible to tooltip display.
• Each printer model now automatically remembers the last print option settings.
• Refactored the AMS mapping interface by removing the "Use AMS" option for the X1 Series, P1 Series, A1, and A1 mini. Select the external spool in the mapping box when you need to print using an external spool.

4. Updated Translations:

• Translations have been updated for 11 languages.
• Special thanks to @fatih5228 for contributing to the Turkish translation!

Bugs Fixed

1. Fixed an issue on the Windows ARM platform where the application would crash after downloading a network plugin.(#6360, #6171, #6283, #6295, #6117, #6063, #6014)
2. Fixed an issue where importing third-party 3mf files could trigger error messages. (#6336)
3. Fixed an issue where the "Slice all" function did not skip empty plates. (#6276)
4. Fixed an issue where GCode would not open correctly in some cases on Mac. (#6231)
5. Fixed an issue on Mac where certain characters could not be entered using the text tool. (#6222)
6. Fixed an issue where the rotation plane for cutting could not be adjusted correctly. (#6300)
7. Fixed an issue where the Enter key on the numeric keypad was not functioning. (#6167)
8. Fixed an issue where Scarf Seam did not work on some 3mf. (#6320)
9. Fixed an issue where importing OBJ files generated by Image-to-3D in MakerWorld caused Studio to crash. (#6333)
10. Fixed an issue where the flow calibration results could not be modified. (#6274)
11. Fixed an issue with displaying incorrect tooltips during preset selection. (#6380)
12. Fixed a potential error with Mac plugin replacement. (#6340)
13. Optimized the shape of tree supports under sharp tails to get better quality.(#6371)
14. To ensure print quality, the fan pre-start feature for filaments (other than PLA and PETG on H2D) has been disabled. (#6177)
15. Fixed a crash with some step files import.(#6079)
16. Fixed an issue that after a sending failure, the user couldn't click "Cancel" and then resend.(#6216)
17. Fixed an issue that the printer did not automatically reconnect after a Mac woke from sleep in some cases.(#6311)
18. Fixed an issue where the flush volume window was displayed incorrectly in Russian.(#6483)
19. Fixed a memory leak issue in the Brim paint function, thanks to @Noisyfox for his contribution.