V02.00.03.54-ls84

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/V02.00.03.54-ls84/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

V2.0.3 is a minor release based on V2.0.2, which fixes some issues found in V2.0.2.

Bugs Fixed

1. Fixed an issue where printing could not start with AMS in some scenarios.(#6557)
2. Fixed a rendering issue under Windows Remote Desktop (RDP).(#6536)
3. Fixed a crash when generating normal support in certain scenarios.(#6535, #6616)
4. Fixed an issue causing high CPU usage in certain scenarios.(#6562)
5. Fixed a crash that occurred when exiting Studio in certain scenarios.(#6544)
6. Fixed a startup failure issue on Windows 7.
7. Fixed an issue where inserting temperature change commands into Timelapse G-code extended print times in certain scenarios.
8. Fixed an error where printing with support material on the H2D failed in certain scenarios.
9. Fixed an issue filament presets were not refreshed promptly after AMS Sync in certain scenarios.(#6583, #6197, #6511, #6478)
10. Updated some Russian translations, thanks to @AndylgTom for the contribution.

You can download the flathub version for Linux from Bambu Studio on flathub
The Flathub version is maintained by @hadess. Many thanks to him again for his outstanding work！

v02.00.01.50-ls83

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v02.00.01.50-ls83/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

This is a version based on 2.0.0 Public Release.

Bugs Fixed

1. Fixed an issue on Mac where the AMS manual mapping was not working properly. (#6146, #6157, #6163, #6185, #6191, #6195, #6202, #6205, #6217, #6230, #6237, #6246, #6250)

2. Fixed an issue that caused P1P with Upgrade Kit not accepted in AMS Sync under P1S preset. (#6148, #6149, #6181, #6204, #6208)

3. Fixed an issue on the calibration page where unloaded AMS filaments were not displayed. (#6150, #6156, #6182, #6210, #6211, #6218, #6232, #6243)

4. Attempted to fix an issue on Windows where Bambu Lab printer presets disappeared after installation. (#6166)

5. Optimized the logic in the 'Send to print' dialog so that the "Use AMS" option is automatically disabled when mapping filament to an external spool in single-nozzle printers. (#6179, #6203)

6. Fixed an issue that caused slicing time too long for some models. (#6186)

7. Fixed an issue where custom filament names could not display correctly in certain languages. (#6190)

8. Fixed incorrect calculation of filament savings for H2D when flush multiplier is not 1. (#6214)

9. Fixed wrong parameters in 0.12mm layer height profile for H2D. (#6169)

10. Fix several compiling issues on Flatpak, thanks for @hadess 's contribution.

Known issue

1. A H2D slice job on Linux still has some problem, please switch to "Preview" tab to finish it. We will fix it and upload a new package soon.

v02.00.01.50-ls82

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v02.00.01.50-ls82/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

This is a version based on 2.0.0 Public Release.

Bugs Fixed

1. Fixed an issue on Mac where the AMS manual mapping was not working properly. (#6146, #6157, #6163, #6185, #6191, #6195, #6202, #6205, #6217, #6230, #6237, #6246, #6250)

2. Fixed an issue that caused P1P with Upgrade Kit not accepted in AMS Sync under P1S preset. (#6148, #6149, #6181, #6204, #6208)

3. Fixed an issue on the calibration page where unloaded AMS filaments were not displayed. (#6150, #6156, #6182, #6210, #6211, #6218, #6232, #6243)

4. Attempted to fix an issue on Windows where Bambu Lab printer presets disappeared after installation. (#6166)

5. Optimized the logic in the 'Send to print' dialog so that the "Use AMS" option is automatically disabled when mapping filament to an external spool in single-nozzle printers. (#6179, #6203)

6. Fixed an issue that caused slicing time too long for some models. (#6186)

7. Fixed an issue where custom filament names could not display correctly in certain languages. (#6190)

8. Fixed incorrect calculation of filament savings for H2D when flush multiplier is not 1. (#6214)

9. Fixed wrong parameters in 0.12mm layer height profile for H2D. (#6169)

10. Fix several compiling issues on Flatpak, thanks for @hadess 's contribution.

Known issue

1. A H2D slice job on Linux still has some problem, please switch to "Preview" tab to finish it. We will fix it and upload a new package soon.

v02.00.01.50-ls81

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v02.00.01.50-ls81/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

This is a version based on 2.0.0 Public Release.

Bugs Fixed

1. Fixed an issue on Mac where the AMS manual mapping was not working properly. (#6146, #6157, #6163, #6185, #6191, #6195, #6202, #6205, #6217, #6230, #6237, #6246, #6250)

2. Fixed an issue that caused P1P with Upgrade Kit not accepted in AMS Sync under P1S preset. (#6148, #6149, #6181, #6204, #6208)

3. Fixed an issue on the calibration page where unloaded AMS filaments were not displayed. (#6150, #6156, #6182, #6210, #6211, #6218, #6232, #6243)

4. Attempted to fix an issue on Windows where Bambu Lab printer presets disappeared after installation. (#6166)

5. Optimized the logic in the 'Send to print' dialog so that the "Use AMS" option is automatically disabled when mapping filament to an external spool in single-nozzle printers. (#6179, #6203)

6. Fixed an issue that caused slicing time too long for some models. (#6186)

7. Fixed an issue where custom filament names could not display correctly in certain languages. (#6190)

8. Fixed incorrect calculation of filament savings for H2D when flush multiplier is not 1. (#6214)

9. Fixed wrong parameters in 0.12mm layer height profile for H2D. (#6169)

10. Fix several compiling issues on Flatpak, thanks for @hadess 's contribution.

Known issue

1. A H2D slice job on Linux still has some problem, please switch to "Preview" tab to finish it. We will fix it and upload a new package soon.

v02.00.00.95-ls81

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v02.00.00.95-ls81/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

Overview

Bambu Studio 2.0 introduces an exciting range of optimizations, particularly for users working with dual-nozzle 3D printers like the Bambu Lab H2D. This version refines the slicing and printing workflow to make the most out of advanced printing setups, ensuring smoother operations and better material efficiency.

One of the key innovations is the optimization of filament grouping. In dual-nozzle 3D printing, the distribution of model colors, the sequence of color changes, and differences in flush volumes between colors all directly impact material use. Bambu Studio 2.0 automatically calculates the best filament arrangement, helping users minimize waste and achieve more efficient prints without manual intervention.

Furthermore, the software now supports independent parameter settings for dual-nozzle, taking into account variations in nozzle types, materials, and settings. This feature is vital to optimize the performance of the dual-nozzle printing system, ensuring the best results for each material.

The improved user interface also plays a crucial role. As the complexity of managing dual nozzles and multiple AMS (Automatic Material System) connections increases, Bambu Studio 2.0 ensures a more intuitive and streamlined experience. Users can focus on their projects without getting bogged down by complex configurations, thanks to the software's smart guidance system that simplifies setup.

Finally, the Bambu Lab H2D, a multifunctional manufacturing center, further enhances this experience. This capability opens up new possibilities for advanced processing scenarios that were once unattainable, or it can help improve efficiency and reduce material consumption through intelligent filament grouping. The Bambu Lab H2D truly expands the potential of 3D printing, enabling more efficient, flexible, and creative manufacturing processes.

Bambu Studio 2.0, with its suite of optimizations, unlocks the full potential of the H2D, making it a game-changer for users seeking greater control, flexibility, and efficiency in their 3D printing projects.

Note: Bambu Studio 2.0 represents a significant upgrade over the previous 1.x series. Due to the introduction of an entirely new workflow and features, 3MF files generated by version 2.0 can only load geometry data in older versions of Bambu Studio. To fully experience the new features, we recommend that users upgrade to version 2.0 as soon as possible.

Features

New Features for H2D

Bambu Studio 2.0 has streamlined the printing workflow, as highlighted in the overview above. Now, let's dive into each step and explore how the new features enhance the process.

1. Import model and change preset to current printer

• Support for Bambu Lab H2D: Bambu Studio now supports the H2D printer preset. Additionally, selecting the nozzle information is no longer required in the printer selection interface.

The H2D printable area varies slightly between the left and right nozzles. The left or right side of the plate corresponds to areas that can be only printed by this side's nozzle, while the center is a shared printable area for both nozzles. In addition to the information displayed on the plate, you can refer to the left or right extruder parameters in the printer settings or visit the Wiki(https://wiki.bambulab.com/en/h2/manual/printable-range-for-dual-nozzles) for detailed information.

• Printer Preset Auto-Sync Recommendation: If the preset embedded in the imported 3MF file does not match the type or preset of the connected printer, the system will recommend switching to the corresponding preset based on the printer type displayed on the device page, enabling a faster start for subsequent tasks.

2. Sync printer & filament information
The number of AMS and the connection method determine the maximum number of filaments that can be accommodated by the left and right nozzles, which is essential for the automatic filament grouping algorithm.

• Added Printer Information Synchronization: A printer synchronization button has been added for dual-nozzle models. When the device is connected to a dual-nozzle printer, clicking this button will synchronize the nozzle diameter, nozzle type, and AMS quantity. After that, AMS and filaments status will show on the UI directly.

• Nozzle Type and AMS Quantity Adjustment: For dual-nozzle printers, users can manually configure the nozzle type (Standard / High Flow) and AMS quantity (Four-slot / Single-slot).

• Filament Sync Function (AMS Sync) Update: After syncing the printer information or after clicking the filament sync button, a new pop-up will prompt you to synchronize the filaments. Based on the origianal "Override mode", we add "Mapping mode" to help user sync filaments info more accurately from their AMS or exteranl spool. Users can click on each filament preset box to manually select the corresponding filament in the AMS or external spool.
  Note: This step synchronizes only the color and type of the filament, not the AMS slot information.

3. Change printer/filament/process settings

For dual-nozzle printers, we have added a range of presets and parameters to accommodate the adjustment requirements across various scenarios.

• Dual-Nozzle Presets with Distinct Nozzle Options: The “Motion Ability” setting for dual-nozzle printers now includes independent configurations for the left and right nozzles, allowing users to set parameters for each nozzle separately.

• Filament Presets Supporting Different Nozzle Types: In the “Filament” and “Setting Overrides” tabs, it is now possible to set parameters specific to different nozzle types. During slicing, the selected nozzle type will be applied automatically. Parameters related to nozzle types are marked with a nozzle icon for easy differentiation.

• Added Dual-Nozzle Presets and Initial Layer Acceleration Parameters in "Process-Speed" Tab: When a dual-nozzle printer is selected, the Speed tab allows independent setting of speed parameters for the left and right nozzle. If you wish to synchronize the speed parameters from one side to the other after making changes, simply click the speed sync button on the right. In addition, the acceleration tab now includes "Initial layer" and "Initial layer travel" options for users to adjust initial layer acceleration individually.

4. Filament Grouping

• Filament Grouping Function: A new filament grouping function has been introduced for dual-nozzle printers, supporting the following three grouping modes:
  • Filament-Saving Mode: The system minimizes filament waste, though users might need to manually adjust the filament placement or AMS connection order on the printer.
  • Convenience Mode: Grouping is based on the current arrangement of filament and AMS, which may result in slightly higher filament waste compared to Filament-Saving Mode.
  • Custom Mode: Allows users to configure grouping based on a custom arrangement order.
    Users can set grouping via a hover panel during slicing, or configure grouping for individual build plates using the grouping settings button on the right side of each plate, or re-group by clicking the corresponding button in the grouping results.

5. Send Print

• Dual-Nozzle Mapping Support on the Send Page: Currently, filam...

v01.10.02.76-ls80

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.02.76-ls80/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

This is the official public release of Bambu Studio v1.10.2.
Please see the release logs of v1.10.2 Beta2 and v1.10.1 Beta for the complete list of changes with respect to v1.10.1.
The full release notes of 1.10.2 can also be found here: https://wiki.bambulab.com/en/software/bambu-studio/release/release-note-1-10-2.

Improvements

1. Added PLA Glow for A1 mini.
2. Added SUNLU filaments for Bambu Lab printers, thanks to @RikshaDriver for the contribution.

Bug fixes

1. Fixed crash when dragging a project in Online Models on MacOS.(bambulab/BambuStudio#5967)

v01.10.02.76-ls79

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.02.76-ls79/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

This is the official public release of Bambu Studio v1.10.2.
Please see the release logs of v1.10.2 Beta2 and v1.10.1 Beta for the complete list of changes with respect to v1.10.1.
The full release notes of 1.10.2 can also be found here: https://wiki.bambulab.com/en/software/bambu-studio/release/release-note-1-10-2.

Improvements

1. Added PLA Glow for A1 mini.
2. Added SUNLU filaments for Bambu Lab printers, thanks to @RikshaDriver for the contribution.

Bug fixes

1. Fixed crash when dragging a project in Online Models on MacOS.(bambulab/BambuStudio#5967)

v01.10.02.76-ls78

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.02.76-ls78/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

This is the official public release of Bambu Studio v1.10.2.
Please see the release logs of v1.10.2 Beta2 and v1.10.1 Beta for the complete list of changes with respect to v1.10.1.
The full release notes of 1.10.2 can also be found here: https://wiki.bambulab.com/en/software/bambu-studio/release/release-note-1-10-2.

Improvements

1. Added PLA Glow for A1 mini.
2. Added SUNLU filaments for Bambu Lab printers, thanks to @RikshaDriver for the contribution.

Bug fixes

1. Fixed crash when dragging a project in Online Models on MacOS.(bambulab/BambuStudio#5967)

v01.10.02.76-ls77

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.02.76-ls77/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

This is the official public release of Bambu Studio v1.10.2.
Please see the release logs of v1.10.2 Beta2 and v1.10.1 Beta for the complete list of changes with respect to v1.10.1.
The full release notes of 1.10.2 can also be found here: https://wiki.bambulab.com/en/software/bambu-studio/release/release-note-1-10-2.

Improvements

1. Added PLA Glow for A1 mini.
2. Added SUNLU filaments for Bambu Lab printers, thanks to @RikshaDriver for the contribution.

Bug fixes

1. Fixed crash when dragging a project in Online Models on MacOS.(bambulab/BambuStudio#5967)

v01.10.02.76-ls76

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.02.76-ls76/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

This is the official public release of Bambu Studio v1.10.2.
Please see the release logs of v1.10.2 Beta2 and v1.10.1 Beta for the complete list of changes with respect to v1.10.1.
The full release notes of 1.10.2 can also be found here: https://wiki.bambulab.com/en/software/bambu-studio/release/release-note-1-10-2.

Improvements

1. Added PLA Glow for A1 mini.
2. Added SUNLU filaments for Bambu Lab printers, thanks to @RikshaDriver for the contribution.

Bug fixes

1. Fixed crash when dragging a project in Online Models on MacOS.(bambulab/BambuStudio#5967)