v01.10.01.50-ls66

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.01.50-ls66/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

Remote Changes:

This is a hotfix version based on 1.10.0

Bugs Fixed

1. Fixed Crashes During STEP File Import:Resolved an issue where some users experienced crashes when importing STEP files. We also improved the UI for the STEP import parameter settings panel to avoid layout issues on some Mac models. Special thanks to @benjaminkott for identifying and helping resolve this issue.(#5816 ,#5819 ,#5192 ,#5198,#5199 ,#5197 ,#5203 ,#5208 ,#5210 ,#5218 ,#5222 ,#5225 ,#5243 ,#5248)
2. Improved Performance on Intel Mac After Slicing:Fixed an issue where the interface response time slowed significantly after slicing on some Mac models with Intel CPUs. Special thanks to @HO44-PROJECT, @northdakota and other users for their assistance and verification. We also added an “Enable multi instance rendering by OpenGL” option in Preferences; if you still experience performance drops, try disabling this option.(#5194 ,#5237 ,#5200 ,#5247 ,#5244 ,#5223 )

3. Fixed Printer Temperature Display Delay:Resolved an issue where the printer’s temperature display was incorrect or delayed.(#5216,#5196)
4. Improved Stop Printing Popup Message:Updated the message in the stop printing popup for clearer communication.

5. Disabled Default Scarf Seam Option:Based on our tests of the Scarf Seam effect and optimal parameters for PLA materials, the Scarf Seam feature and some parameters were initially set as filament attributes and enabled by default for most PLA materials in the V1.10.0 Public Release. However, after release, it was observed that contour angle detection may vary depending on the model, causing inconsistent seam quality along the Z-axis. As shown below, areas with the Scarf Seam applied had a smoother surface, while regions without it displayed inferior quality. The seam inconsistencies at the border between regions created an uneven surface effect. In the future versions, we will optimize the Scarf Seam function to maintain consistent outer surface print quality along a single line.

Due to these issues, Scarf Seam is temporarily disabled by default. If you want to use Scarf Seam, please enable it on the Filament settings page. If you encounter an uneven Scarf Seam, try lowering the 'Scarf application angle threshold' or disabling the 'Smart scarf seam application' to improve the result.

6. Resolved an issue where the color of STL files became abnormal after splitting them into separate objects.(#5201)
7. Resolved an issue where the pause printing feature occasionally failed to work.(#5253 ,#5275)

v01.10.01.50-ls65

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.01.50-ls65/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is a hotfix version based on 1.10.0

Bugs Fixed

1. Fixed Crashes During STEP File Import:Resolved an issue where some users experienced crashes when importing STEP files. We also improved the UI for the STEP import parameter settings panel to avoid layout issues on some Mac models. Special thanks to @benjaminkott for identifying and helping resolve this issue.(#5816 ,#5819 ,#5192 ,#5198,#5199 ,#5197 ,#5203 ,#5208 ,#5210 ,#5218 ,#5222 ,#5225 ,#5243 ,#5248)
2. Improved Performance on Intel Mac After Slicing:Fixed an issue where the interface response time slowed significantly after slicing on some Mac models with Intel CPUs. Special thanks to @HO44-PROJECT, @northdakota and other users for their assistance and verification. We also added an “Enable multi instance rendering by OpenGL” option in Preferences; if you still experience performance drops, try disabling this option.(#5194 ,#5237 ,#5200 ,#5247 ,#5244 ,#5223 )

3. Fixed Printer Temperature Display Delay:Resolved an issue where the printer’s temperature display was incorrect or delayed.(#5216,#5196)
4. Improved Stop Printing Popup Message:Updated the message in the stop printing popup for clearer communication.

5. Disabled Default Scarf Seam Option:Based on our tests of the Scarf Seam effect and optimal parameters for PLA materials, the Scarf Seam feature and some parameters were initially set as filament attributes and enabled by default for most PLA materials in the V1.10.0 Public Release. However, after release, it was observed that contour angle detection may vary depending on the model, causing inconsistent seam quality along the Z-axis. As shown below, areas with the Scarf Seam applied had a smoother surface, while regions without it displayed inferior quality. The seam inconsistencies at the border between regions created an uneven surface effect. In the future versions, we will optimize the Scarf Seam function to maintain consistent outer surface print quality along a single line.

Due to these issues, Scarf Seam is temporarily disabled by default. If you want to use Scarf Seam, please enable it on the Filament settings page. If you encounter an uneven Scarf Seam, try lowering the 'Scarf application angle threshold' or disabling the 'Smart scarf seam application' to improve the result.

6. Resolved an issue where the color of STL files became abnormal after splitting them into separate objects.(#5201)
7. Resolved an issue where the pause printing feature occasionally failed to work.(#5253 ,#5275)

v01.10.01.50-ls64

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.01.50-ls64/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is a hotfix version based on 1.10.0

Bugs Fixed

1. Fixed Crashes During STEP File Import:Resolved an issue where some users experienced crashes when importing STEP files. We also improved the UI for the STEP import parameter settings panel to avoid layout issues on some Mac models. Special thanks to @benjaminkott for identifying and helping resolve this issue.(#5816 ,#5819 ,#5192 ,#5198,#5199 ,#5197 ,#5203 ,#5208 ,#5210 ,#5218 ,#5222 ,#5225 ,#5243 ,#5248)
2. Improved Performance on Intel Mac After Slicing:Fixed an issue where the interface response time slowed significantly after slicing on some Mac models with Intel CPUs. Special thanks to @HO44-PROJECT, @northdakota and other users for their assistance and verification. We also added an “Enable multi instance rendering by OpenGL” option in Preferences; if you still experience performance drops, try disabling this option.(#5194 ,#5237 ,#5200 ,#5247 ,#5244 ,#5223 )

3. Fixed Printer Temperature Display Delay:Resolved an issue where the printer’s temperature display was incorrect or delayed.(#5216,#5196)
4. Improved Stop Printing Popup Message:Updated the message in the stop printing popup for clearer communication.

5. Disabled Default Scarf Seam Option:Based on our tests of the Scarf Seam effect and optimal parameters for PLA materials, the Scarf Seam feature and some parameters were initially set as filament attributes and enabled by default for most PLA materials in the V1.10.0 Public Release. However, after release, it was observed that contour angle detection may vary depending on the model, causing inconsistent seam quality along the Z-axis. As shown below, areas with the Scarf Seam applied had a smoother surface, while regions without it displayed inferior quality. The seam inconsistencies at the border between regions created an uneven surface effect. In the future versions, we will optimize the Scarf Seam function to maintain consistent outer surface print quality along a single line.

Due to these issues, Scarf Seam is temporarily disabled by default. If you want to use Scarf Seam, please enable it on the Filament settings page. If you encounter an uneven Scarf Seam, try lowering the 'Scarf application angle threshold' or disabling the 'Smart scarf seam application' to improve the result.

6. Resolved an issue where the color of STL files became abnormal after splitting them into separate objects.(#5201)
7. Resolved an issue where the pause printing feature occasionally failed to work.(#5253 ,#5275)

v01.10.01.50-ls63

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.01.50-ls63/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is a hotfix version based on 1.10.0

Bugs Fixed

1. Fixed Crashes During STEP File Import:Resolved an issue where some users experienced crashes when importing STEP files. We also improved the UI for the STEP import parameter settings panel to avoid layout issues on some Mac models. Special thanks to @benjaminkott for identifying and helping resolve this issue.(#5816 ,#5819 ,#5192 ,#5198,#5199 ,#5197 ,#5203 ,#5208 ,#5210 ,#5218 ,#5222 ,#5225 ,#5243 ,#5248)
2. Improved Performance on Intel Mac After Slicing:Fixed an issue where the interface response time slowed significantly after slicing on some Mac models with Intel CPUs. Special thanks to @HO44-PROJECT, @northdakota and other users for their assistance and verification. We also added an “Enable multi instance rendering by OpenGL” option in Preferences; if you still experience performance drops, try disabling this option.(#5194 ,#5237 ,#5200 ,#5247 ,#5244 ,#5223 )

3. Fixed Printer Temperature Display Delay:Resolved an issue where the printer’s temperature display was incorrect or delayed.(#5216,#5196)
4. Improved Stop Printing Popup Message:Updated the message in the stop printing popup for clearer communication.

5. Disabled Default Scarf Seam Option:Based on our tests of the Scarf Seam effect and optimal parameters for PLA materials, the Scarf Seam feature and some parameters were initially set as filament attributes and enabled by default for most PLA materials in the V1.10.0 Public Release. However, after release, it was observed that contour angle detection may vary depending on the model, causing inconsistent seam quality along the Z-axis. As shown below, areas with the Scarf Seam applied had a smoother surface, while regions without it displayed inferior quality. The seam inconsistencies at the border between regions created an uneven surface effect. In the future versions, we will optimize the Scarf Seam function to maintain consistent outer surface print quality along a single line.

Due to these issues, Scarf Seam is temporarily disabled by default. If you want to use Scarf Seam, please enable it on the Filament settings page. If you encounter an uneven Scarf Seam, try lowering the 'Scarf application angle threshold' or disabling the 'Smart scarf seam application' to improve the result.

6. Resolved an issue where the color of STL files became abnormal after splitting them into separate objects.(#5201)
7. Resolved an issue where the pause printing feature occasionally failed to work.(#5253 ,#5275)

v01.10.01.50-ls62

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.01.50-ls62/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is a hotfix version based on 1.10.0

Bugs Fixed

1. Fixed Crashes During STEP File Import:Resolved an issue where some users experienced crashes when importing STEP files. We also improved the UI for the STEP import parameter settings panel to avoid layout issues on some Mac models. Special thanks to @benjaminkott for identifying and helping resolve this issue.(#5816 ,#5819 ,#5192 ,#5198,#5199 ,#5197 ,#5203 ,#5208 ,#5210 ,#5218 ,#5222 ,#5225 ,#5243 ,#5248)
2. Improved Performance on Intel Mac After Slicing:Fixed an issue where the interface response time slowed significantly after slicing on some Mac models with Intel CPUs. Special thanks to @HO44-PROJECT, @northdakota and other users for their assistance and verification. We also added an “Enable multi instance rendering by OpenGL” option in Preferences; if you still experience performance drops, try disabling this option.(#5194 ,#5237 ,#5200 ,#5247 ,#5244 ,#5223 )

3. Fixed Printer Temperature Display Delay:Resolved an issue where the printer’s temperature display was incorrect or delayed.(#5216,#5196)
4. Improved Stop Printing Popup Message:Updated the message in the stop printing popup for clearer communication.

5. Disabled Default Scarf Seam Option:Based on our tests of the Scarf Seam effect and optimal parameters for PLA materials, the Scarf Seam feature and some parameters were initially set as filament attributes and enabled by default for most PLA materials in the V1.10.0 Public Release. However, after release, it was observed that contour angle detection may vary depending on the model, causing inconsistent seam quality along the Z-axis. As shown below, areas with the Scarf Seam applied had a smoother surface, while regions without it displayed inferior quality. The seam inconsistencies at the border between regions created an uneven surface effect. In the future versions, we will optimize the Scarf Seam function to maintain consistent outer surface print quality along a single line.

Due to these issues, Scarf Seam is temporarily disabled by default. If you want to use Scarf Seam, please enable it on the Filament settings page. If you encounter an uneven Scarf Seam, try lowering the 'Scarf application angle threshold' or disabling the 'Smart scarf seam application' to improve the result.

6. Resolved an issue where the color of STL files became abnormal after splitting them into separate objects.(#5201)
7. Resolved an issue where the pause printing feature occasionally failed to work.(#5253 ,#5275)

v01.10.01.50-ls61

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.01.50-ls61/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is a hotfix version based on 1.10.0

Bugs Fixed

1. Fixed Crashes During STEP File Import:Resolved an issue where some users experienced crashes when importing STEP files. We also improved the UI for the STEP import parameter settings panel to avoid layout issues on some Mac models. Special thanks to @benjaminkott for identifying and helping resolve this issue.(#5816 ,#5819 ,#5192 ,#5198,#5199 ,#5197 ,#5203 ,#5208 ,#5210 ,#5218 ,#5222 ,#5225 ,#5243 ,#5248)
2. Improved Performance on Intel Mac After Slicing:Fixed an issue where the interface response time slowed significantly after slicing on some Mac models with Intel CPUs. Special thanks to @HO44-PROJECT, @northdakota and other users for their assistance and verification. We also added an “Enable multi instance rendering by OpenGL” option in Preferences; if you still experience performance drops, try disabling this option.(#5194 ,#5237 ,#5200 ,#5247 ,#5244 ,#5223 )

3. Fixed Printer Temperature Display Delay:Resolved an issue where the printer’s temperature display was incorrect or delayed.(#5216,#5196)
4. Improved Stop Printing Popup Message:Updated the message in the stop printing popup for clearer communication.

5. Disabled Default Scarf Seam Option:Based on our tests of the Scarf Seam effect and optimal parameters for PLA materials, the Scarf Seam feature and some parameters were initially set as filament attributes and enabled by default for most PLA materials in the V1.10.0 Public Release. However, after release, it was observed that contour angle detection may vary depending on the model, causing inconsistent seam quality along the Z-axis. As shown below, areas with the Scarf Seam applied had a smoother surface, while regions without it displayed inferior quality. The seam inconsistencies at the border between regions created an uneven surface effect. In the future versions, we will optimize the Scarf Seam function to maintain consistent outer surface print quality along a single line.

Due to these issues, Scarf Seam is temporarily disabled by default. If you want to use Scarf Seam, please enable it on the Filament settings page. If you encounter an uneven Scarf Seam, try lowering the 'Scarf application angle threshold' or disabling the 'Smart scarf seam application' to improve the result.

6. Resolved an issue where the color of STL files became abnormal after splitting them into separate objects.(#5201)
7. Resolved an issue where the pause printing feature occasionally failed to work.(#5253 ,#5275)

v01.10.00.89-ls61

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.10.00.89-ls61/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is the official public release of Bambu Studio v1.10.0.
Please see the release logs of 1.10 Public Beta and 1.10 Public Beta2 for the complete list of changes with respect to 1.9.7.
The full release notes of 1.10.0 can also be found here: https://wiki.bambulab.com/en/software/bambu-studio/release/release-note-1-10-0

Feature

1.Added MakerWorld Search Box on Homepage.

2. Added Print History at the Bottom of Homepage: A new print history section has been introduced, allowing for easy tracking and review of past print records.

Improvements

1. Enhanced Project Link Functionality: Clicking on project links within "Projects" now redirects to the MakerWorld page, and project descriptions can now be copied. (Model from @SwoopsyPoo)
   
2. Ukrainian Translation Update: Special thanks to @iZonex for the updated Ukrainian translation.
3. Build Improvements: Addressed several build issues, thanks to contributions from @hadess and @dankamongmen .
4. New QiDi Printer Profile: Thanks to @HYzd766 for contributing the configuration for new QiDi machines.

Bugs Fixed

1. Resolved errors in auto-orientation at specific angles.（#5092）
2. Fixed a potential collision issue when printing items ’By-Object‘.（#4804）
3. Corrected an issue where navigating to specific layers could fail. （#4957, #5170）
4. Addressed a crash issue when connecting in cross-subnet mode.（#5135）
5. Fixed synchronization problems with the AMS in certain cases. （#5181, #4863, #4949）

v01.09.07.52-ls60

CI Report:

https://ci-tests.linuxserver.io/linuxserver/bambustudio/v01.09.07.52-ls60/index.html

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.52-ls59

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.52-ls58

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841