v01.09.07.52-ls57

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.52-ls56

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.50-ls55

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is the public official release of Bambu Studio v1.9.7.

Improvement

1. Liveview will automatically pause after 15 minutes of inactivity by default to conserve energy and reduce data usage. This feature can be disabled in 'Preferences-Media-Keep liveview when printing'. bambulab/BambuStudio#4690

2. Optimized the file sent to the printer, excluding irrelevant data that is not essential to printing. For MakerWorld models with complex printing guidlines, this optimization significantly reduces the storage consuption and file sending time.

3. Added support for spiral Z hop out of timelapse mode to prevent potential nozzle collisions and reduce stringing issues on A1/A1 mini. Special thanks to @ziehmon. bambulab/BambuStudio#3423

4. Added slice time display for each plate in 'All Plates Stats'.

5. Added model repair service for MacOS Bambu Studio users. Huge thanks to https://www.formware.co/onlinestlrepair for permission to access the service.

6. Polish language support has been added. bambulab/BambuStudio#4491 bambulab/BambuStudio#4360
7. New updates for Turkish translations and thanks to @fatih5228 for your job.
8. Added statistics for filament usage in GCode, including total weight, volume, and length.Thanks to @THE-SIMPLE-MARK.
   bambulab/BambuStudio#3072
9. Updated the Icon for Archimedean Chords. Thanks @MarkussLugia for the awesome job.
10. Keep the dialog window open after creating or editing custom filaments.

Bugfix

1. Fixed an issue causing significant layering and poor print quality due to line width errors in Arachne mode in version 1.9.5.(model from adriancubas)

2. Fixed the bug where no flushing GCode was generated when the flushing amount was small.bambulab/BambuStudio#4738
3. Fix the problem of no retraction after extruding compensation in A1/A1 mini.
4. Add X1E to the PPA-CF preset.
5. Fix the height_to_lid of A1 mini.
6. Fix AMS mapping issue including crash.
7. Fixed an issue where the Home tab content could be incorrectly occupied when users opened new tabs under the MakerWorld tab in Studio. Studio now consistently opens these new tabs in the local browser.

v01.09.07.52-ls54

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.52-ls53

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.52-ls52

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.52-ls51

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Important. Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 as this bug has been fixed, and avoid using the previous version.

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.52-ls50

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

Version 1.9.7.50 has been removed due to an offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode like following picture.
Please upgrade to version 1.9.7.52 and DO NOT USE V1.9.7.50 ANY MORE!

Bugfix

As mentioned above,V1.9.7.52 fixed the offset issue when printing with multiple colors on A1/A1 mini in Timelapse mode. In version 1.9.7.50, after the filament change GCode, spiral Z hop outside the plate is attempted which may reach the machine's limit position, causing lost steps and resulting in offset.bambulab/BambuStudio#4841

v01.09.07.50-ls50

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is the public official release of Bambu Studio v1.9.7.

Improvement

1. Liveview will automatically pause after 15 minutes of inactivity by default to conserve energy and reduce data usage. This feature can be disabled in 'Preferences-Media-Keep liveview when printing'. bambulab/BambuStudio#4690

2. Optimized the file sent to the printer, excluding irrelevant data that is not essential to printing. For MakerWorld models with complex printing guidlines, this optimization significantly reduces the storage consuption and file sending time.

3. Added support for spiral Z hop out of timelapse mode to prevent potential nozzle collisions and reduce stringing issues on A1/A1 mini. Special thanks to @ziehmon. bambulab/BambuStudio#3423

4. Added slice time display for each plate in 'All Plates Stats'.

5. Added model repair service for MacOS Bambu Studio users. Huge thanks to https://www.formware.co/onlinestlrepair for permission to access the service.

6. Polish language support has been added. bambulab/BambuStudio#4491 bambulab/BambuStudio#4360
7. New updates for Turkish translations and thanks to @fatih5228 for your job.
8. Added statistics for filament usage in GCode, including total weight, volume, and length.Thanks to @THE-SIMPLE-MARK.
   bambulab/BambuStudio#3072
9. Updated the Icon for Archimedean Chords. Thanks @MarkussLugia for the awesome job.
10. Keep the dialog window open after creating or editing custom filaments.

Bugfix

1. Fixed an issue causing significant layering and poor print quality due to line width errors in Arachne mode in version 1.9.5.(model from adriancubas)

2. Fixed the bug where no flushing GCode was generated when the flushing amount was small.bambulab/BambuStudio#4738
3. Fix the problem of no retraction after extruding compensation in A1/A1 mini.
4. Add X1E to the PPA-CF preset.
5. Fix the height_to_lid of A1 mini.
6. Fix AMS mapping issue including crash.
7. Fixed an issue where the Home tab content could be incorrectly occupied when users opened new tabs under the MakerWorld tab in Studio. Studio now consistently opens these new tabs in the local browser.

v01.09.05.51-ls49

LinuxServer Changes:

Add required fonts and environment variable for dark mode.

BambuStudio Changes:

This is a hotfix version based on 1.9.4.60

Bugfix

1. Fix the printing failure issue caused by repeating printing of outer walls when enabling SSDA in arachne mode.
   reddit: https://www.reddit.com/r/BambuLab/comments/1f314us/psa_latest_studio_version_1090460_disagrees_with/

The left image shows error path before the fix, and the right image shows the right path after the fix.