Hiking DDS238 2
DDS238-2 is a single-phase DIN rail smart power meter.
By default, it runs Tuya proprietary firmware.
Provisioning configuration name: espqtoggle/hiking/dds238-2-wifi
- flash mode: DIO
- flash frequency: 40MHz
| Number | Function | Remarks |
|---|---|---|
| 1 | MCU RX | |
| 3 | MCU TX | |
| 14 | status LED | active low |
| 16 | push button | active low |
| Id | Type | Description | Range/Unit | Remarks |
|---|---|---|---|---|
relay |
boolean | relay | ||
active_power |
number | active power | W | |
reactive_power |
number | reactive power | VAR | |
apparent_power |
number | apparent power | VA | |
power_factor |
number | power factor | 0..100 % | |
energy |
number | energy | kWh | |
voltage |
number | voltage | V | |
current |
number | current | mA |
Follow the Tuya Convert OS procedure.
You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.