06 Apr 05:53

1d52ffc

v01.09.00.60-ls21

LinuxServer Changes:

Update Readme with new env vars.

BambuStudio Changes:

This is a major release (V1.9.0 Public Beta) that introduces features, improvements, and fixes according to user feedback.

Please note that 3MF files generated by the public beta version of BambuStudio are not compatible for uploading to MakerWorld.

Feature

1. Natively integrate MakerWorld

We have integrated MakerWorld in Bambu Studio to provide seamless experience for you to share, search, and slice 3D models.

The homepage layout has been redesigned to display more contents.
A link button to MakerLab has been added in the homepage so you can click and navigate to the web page.
And now we support displaying and searching models, and importing 3D models directly in Bambu Studio.

2. Support for customize print sequences beyond the first layer

Please see this wiki page for detail.

3. Improved Scarf Seam

Scarf Seam is a useful technique to hide seams for objects with few corners, where the seam joint is not a single point as the usual seam, but a short slope. Scarf seam was firstly introduced in Orca Slicer by Noisyfox https://github.com/Noisyfox and fellow community contributors for their involvement and discussions, and we deeply appreciate their great contributions. We have imported and further improved Scarf Seam.

Drawing upon community contributions, Bambu Lab strives to refine seam quality for users within established parameters. This approach aims to enable users to achieve enhanced seam outcomes without adjusting line width or reducing print speed. The comparison is shown as follows:

Additionally, Bambu Lab adds the scarf seam overhang detection for conditional joints. When enabled, the scarf seams are not utilized if the overhang exceeds a certain threshold. This addresses the issue where the scarf seam becomes less effective and fails in cases of excessive overhang.

Please note: it is an experiment function and is turned off by default. Please use it with caution. The function entrance shows the figure below.

4. Reducing purge through retracting filament

Experimental feature in development mode, currently exclusive to the X and P series and disabled by default. This function prolongs the retraction and cutting distance of the filament during changes, aiming to reduce purging. While it significantly decreases flushing, it may elevate the risk of nozzle clogs or other printing complications. Please use it with caution, thanks to @LeonFisherSkipper.

5. Improve PA calibration pattern

Improve PA calibration pattern. All calibration lines are now printed on a single base plate, facilitating the model's disassembly. courtesy of OrcaSlicer, thanks to @SoftFever.

6. Users can now input their own calibration values

Following user feedback, Bambu Studio has introduced a feature allowing users to directly input and save their specific calibration values on the printer, facilitating the customization of device settings. This update is designed to enhance the overall user experience.

7. Straight line painting (horizontal & vertical) and view enhancement

Introduced a tool for drawing straight lines (vertical and horizontal) in painting, plus a default front view and horizontal rotation feature, courtesy of OrcaSlicer, thanks to @SoftFever.

8. Ported and improved measurement tool

Initially created by the PrusaSlicer team and favored by numerous users, the 'Measure' feature has been adapted for Bambu Studio, with acknowledgments to both OrcaSlicer and PrusaSlicer.
We've enhanced this feature by introducing modifications that enable measurement across multiple model objects, significantly elevating its functionality.

Moreover, we've enabled setting distances between different meshes, allowing for assembly functions akin to CAD, facilitating precise distance-based assembly.

9. Enabled Spiral Vase Mode in per-plate settings.

bambulab/BambuStudio#2079
The new per-plated 'Spiral Vase' option is added under the Plate Settings tab. With this setting, model airplane parts designated for printing in spiral vase mode can now be sliced together with standard parts as long as they are in different plates.

10. Added a new option "Support/object first layer gap"

Previously, the distance between the first layer of supports and objects was determined by the brim gap, a setting that could complicate support removal in some instances. Now, this gap can be adjusted independently, with a default value of 0.2mm that generally performs well on Textured PEI plates. Adjustments may be necessary for other types of plates.

Improvement

1. Smooth overhang speed

This update enhances the overhang descent speed feature for smoother transitions between speeds, thus improving the appearance of speed-transition defects. This improvement is accessible in Classic mode. The following image illustrates the effect of the smooth overhang descent speed (cooling function was turned off to showcase the overhang speed transition).

A. The overhang descent speed is smoother, and the quality of speed-dependent patterns has been improved. The test model is from wuguigui https://makerworld.com/zh/@wuguigui on MakerWorld https://makerworld.com/zh/models/12888#profileId-13005
As shown in the left image, the areas with significant speed changes have transitions (red arrows), while areas with drastic path changes do not have transitions (yellow arrows). And the printing result, as shown in the right image, demonstrates surface improvement.

B. Additionally, the arc fitting result is preserved. Both the speed transition and non-speed transition parts retain arc fitting. The bottom-left image shows arc fitting in the speed transition part, and the bottom-right image shows arc fitting in the non-speed transition part.

2. due to the improved calculation method for overhangs, there has been an improvement in fly-wall path caused by overhang calculations. The bottom-left image shows the situation before the improvement, while the bottom-right image shows the situation after the improvement.

3. Tooltips have been added to all gizmo tools, offering straightforward instructions for use.

4. Added Plates Stats Total Cost, thanks @niklasb22.

5. Show estimated print time in the ruler, thanks @Noisyfox

6. Display both layer time and tick information when a tick is selected from the gcode progress bar, thanks @Noisyfox

7. Support remote batch file management on the machine.

8. Optimized performance and reduced lag when switching between parameter pages.

9. Optimized error descriptions and resolution methods for Liveview and file browsing.

10. Enhanced application b...

Contributors

Noisyfox, LeonFisherSkipper, and 2 other contributors

Assets 2

25 Mar 16:07

LinuxServer-CI