Skip to content

Commit 29d532f

Browse files
holydustholydust
authored
add files
1 parent 0a678a6 commit 29d532f

24 files changed

+2577
-0
lines changed

‎boards/corvon/743v1/bootloader.px4board

Lines changed: 3 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,3 @@
1+
CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
2+
CONFIG_BOARD_ARCHITECTURE="cortex-m7"
3+
CONFIG_BOARD_ROMFSROOT=""

‎boards/corvon/743v1/default.px4board

Lines changed: 85 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,85 @@
1+
CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
2+
CONFIG_BOARD_ARCHITECTURE="cortex-m7"
3+
CONFIG_BOARD_SERIAL_URT6="/dev/ttyS5"
4+
CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS2"
5+
CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS0"
6+
CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
7+
CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS3"
8+
CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
9+
CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
10+
CONFIG_DRIVERS_ADC_BOARD_ADC=y
11+
CONFIG_DRIVERS_BAROMETER_DPS310=y
12+
CONFIG_DRIVERS_CDCACM_AUTOSTART=y
13+
CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
14+
CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_ASP5033=y
15+
CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_AUAV=y
16+
CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_ETS=y
17+
CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_MS4515=y
18+
CONFIG_DRIVERS_DSHOT=y
19+
CONFIG_DRIVERS_GPS=y
20+
CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
21+
CONFIG_DRIVERS_IMU_BOSCH_BMI270=y
22+
CONFIG_COMMON_MAGNETOMETER=y
23+
CONFIG_DRIVERS_PPS_CAPTURE=y
24+
CONFIG_DRIVERS_PWM_OUT=y
25+
CONFIG_COMMON_RC=y
26+
CONFIG_DRIVERS_RC_INPUT=y
27+
CONFIG_DRIVERS_TAP_ESC=y
28+
CONFIG_COMMON_TELEMETRY=y
29+
CONFIG_DRIVERS_UAVCAN=y
30+
CONFIG_BOARD_UAVCAN_INTERFACES=1
31+
CONFIG_MODULES_BATTERY_STATUS=y
32+
CONFIG_MODULES_COMMANDER=y
33+
CONFIG_MODULES_CONTROL_ALLOCATOR=y
34+
CONFIG_MODULES_DATAMAN=y
35+
CONFIG_MODULES_EKF2=y
36+
CONFIG_MODULES_ESC_BATTERY=y
37+
CONFIG_MODULES_EVENTS=y
38+
CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
39+
CONFIG_MODULES_FW_ATT_CONTROL=y
40+
CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
41+
CONFIG_MODULES_FW_POS_CONTROL=y
42+
CONFIG_MODULES_FW_RATE_CONTROL=y
43+
CONFIG_MODULES_GYRO_CALIBRATION=y
44+
CONFIG_MODULES_GYRO_FFT=y
45+
CONFIG_MODULES_LAND_DETECTOR=y
46+
CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
47+
CONFIG_MODULES_LOAD_MON=y
48+
CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
49+
CONFIG_MODULES_LOGGER=y
50+
CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
51+
CONFIG_MODULES_MANUAL_CONTROL=y
52+
CONFIG_MODULES_MAVLINK=y
53+
CONFIG_MODULES_MC_ATT_CONTROL=y
54+
CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
55+
CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
56+
CONFIG_MODULES_MC_POS_CONTROL=y
57+
CONFIG_MODULES_MC_RATE_CONTROL=y
58+
CONFIG_MODULES_NAVIGATOR=y
59+
CONFIG_MODULES_PAYLOAD_DELIVERER=y
60+
CONFIG_MODULES_RC_UPDATE=y
61+
CONFIG_MODULES_SENSORS=y
62+
CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
63+
CONFIG_MODULES_UXRCE_DDS_CLIENT=y
64+
CONFIG_MODULES_VTOL_ATT_CONTROL=y
65+
CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
66+
CONFIG_SYSTEMCMDS_DMESG=y
67+
CONFIG_SYSTEMCMDS_DUMPFILE=y
68+
CONFIG_SYSTEMCMDS_FAILURE=y
69+
CONFIG_SYSTEMCMDS_GPIO=y
70+
CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
71+
CONFIG_SYSTEMCMDS_I2CDETECT=y
72+
CONFIG_SYSTEMCMDS_NSHTERM=y
73+
CONFIG_SYSTEMCMDS_PARAM=y
74+
CONFIG_SYSTEMCMDS_PERF=y
75+
CONFIG_SYSTEMCMDS_REBOOT=y
76+
CONFIG_SYSTEMCMDS_SD_BENCH=y
77+
CONFIG_SYSTEMCMDS_SD_STRESS=y
78+
CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
79+
CONFIG_SYSTEMCMDS_TOP=y
80+
CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
81+
CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
82+
CONFIG_SYSTEMCMDS_UORB=y
83+
CONFIG_SYSTEMCMDS_USB_CONNECTED=y
84+
CONFIG_SYSTEMCMDS_VER=y
85+
CONFIG_SYSTEMCMDS_WORK_QUEUE=y

‎boards/corvon/743v1/extras/corvon_743v1_bootloader.bin

40.1 KB
Binary file not shown.

‎boards/corvon/743v1/firmware.prototype

Lines changed: 13 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,13 @@
1+
{
2+
"board_id": 1178,
3+
"magic": "PX4FWv1",
4+
"description": "Firmware for the CORVON743v1 board",
5+
"image": "",
6+
"build_time": 0,
7+
"summary": "CORVON743v1",
8+
"version": "0.1",
9+
"image_size": 0,
10+
"image_maxsize": 1835008,
11+
"git_identity": "",
12+
"board_revision": 0
13+
}

‎boards/corvon/743v1/init/rc.board_defaults

Lines changed: 24 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,24 @@
1+
#!/bin/sh
2+
#
3+
# board specific defaults
4+
#------------------------------------------------------------------------------
5+
param set-default BAT1_A_PER_V 40
6+
param set-default BAT1_N_CELLS 4
7+
param set-default BAT1_V_CHARGED 4.2
8+
param set-default BAT1_V_DIV 21.2
9+
param set-default BAT1_V_EMPTY 3.2
10+
11+
param set-default SYS_HAS_MAG 1
12+
param set-default PWM_MAIN_TIM0 -4
13+
param set-default RC_INPUT_PROTO -1
14+
15+
param set-default IMU_GYRO_CUTOFF 80
16+
param set-default SYS_AUTOSTART 4001
17+
param set-default MC_PITCHRATE_K 0.4
18+
param set-default MC_ROLLRATE_K 0.35
19+
param set-default MC_YAWRATE_K 1.2
20+
param set-default MC_YAWRATE_MAX 360
21+
param set-default MAV_TYPE 2
22+
param set-default CA_AIRFRAME 0
23+
param set-default CA_ROTOR_COUNT 4
24+
param set-default CBRK_SUPPLY_CHK 894281

‎boards/corvon/743v1/init/rc.board_extras

Lines changed: 7 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,7 @@
1+
#!/bin/sh
2+
#
3+
# board specific extras init
4+
#------------------------------------------------------------------------------
5+
6+
# enable onboard OSD chip
7+
# atxxxx start -s

‎boards/corvon/743v1/init/rc.board_sensors

Lines changed: 18 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,18 @@
1+
#!/bin/sh
2+
#
3+
# board specific sensors init
4+
#------------------------------------------------------------------------------
5+
6+
board_adc start
7+
8+
# # Internal SPI bus BMI088 accel/gyro
9+
bmi088 -s -b 2 -A -R 6 start
10+
bmi088 -s -b 2 -G -R 6 start
11+
12+
# # Internal SPI bus BMI270 accel/gyro
13+
bmi270 -s -b 2 -R 0 start
14+
15+
# Internal baro
16+
dps310 -I start -a 118
17+
18+
ist8310 -I -R 2 start

‎boards/corvon/743v1/nuttx-config/bootloader/defconfig

Lines changed: 85 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,85 @@
1+
#
2+
# This file is autogenerated: PLEASE DO NOT EDIT IT.
3+
#
4+
# You can use "make menuconfig" to make any modifications to the installed .config file.
5+
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
6+
# modifications.
7+
#
8+
# CONFIG_DEV_CONSOLE is not set
9+
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
10+
# CONFIG_SPI_EXCHANGE is not set
11+
# CONFIG_STM32H7_SYSCFG is not set
12+
CONFIG_ARCH="arm"
13+
CONFIG_ARCH_BOARD_CUSTOM=y
14+
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/corvon/743v1/nuttx-config"
15+
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
16+
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
17+
CONFIG_ARCH_CHIP="stm32h7"
18+
CONFIG_ARCH_CHIP_STM32H743VI=y
19+
CONFIG_ARCH_CHIP_STM32H7=y
20+
CONFIG_ARCH_INTERRUPTSTACK=768
21+
CONFIG_ARMV7M_BASEPRI_WAR=y
22+
CONFIG_ARMV7M_ICACHE=y
23+
CONFIG_ARMV7M_MEMCPY=y
24+
CONFIG_ARMV7M_USEBASEPRI=y
25+
CONFIG_BOARDCTL=y
26+
CONFIG_BOARDCTL_RESET=y
27+
CONFIG_BOARD_ASSERT_RESET_VALUE=0
28+
CONFIG_BOARD_INITTHREAD_PRIORITY=254
29+
CONFIG_BOARD_LATE_INITIALIZE=y
30+
CONFIG_BOARD_LOOPSPERMSEC=95150
31+
CONFIG_BOARD_RESET_ON_ASSERT=2
32+
CONFIG_CDCACM=y
33+
CONFIG_CDCACM_IFLOWCONTROL=y
34+
CONFIG_CDCACM_PRODUCTID=0x004b
35+
CONFIG_CDCACM_PRODUCTSTR="CORVON743v1"
36+
CONFIG_CDCACM_RXBUFSIZE=600
37+
CONFIG_CDCACM_TXBUFSIZE=12000
38+
CONFIG_CDCACM_VENDORID=0x3162
39+
CONFIG_CDCACM_VENDORSTR="CORVON"
40+
CONFIG_DEBUG_FULLOPT=y
41+
CONFIG_DEBUG_SYMBOLS=y
42+
CONFIG_DEBUG_TCBINFO=y
43+
CONFIG_DEFAULT_SMALL=y
44+
CONFIG_EXPERIMENTAL=y
45+
CONFIG_FDCLONE_DISABLE=y
46+
CONFIG_FDCLONE_STDIO=y
47+
CONFIG_HAVE_CXX=y
48+
CONFIG_HAVE_CXXINITIALIZE=y
49+
CONFIG_IDLETHREAD_STACKSIZE=750
50+
CONFIG_INIT_ENTRYPOINT="bootloader_main"
51+
CONFIG_INIT_STACKSIZE=3194
52+
CONFIG_LIBC_FLOATINGPOINT=y
53+
CONFIG_LIBC_LONG_LONG=y
54+
CONFIG_LIBC_STRERROR=y
55+
CONFIG_MEMSET_64BIT=y
56+
CONFIG_MEMSET_OPTSPEED=y
57+
CONFIG_PREALLOC_TIMERS=50
58+
CONFIG_PTHREAD_STACK_MIN=512
59+
CONFIG_RAM_SIZE=245760
60+
CONFIG_RAM_START=0x20010000
61+
CONFIG_RAW_BINARY=y
62+
CONFIG_SIG_DEFAULT=y
63+
CONFIG_SIG_SIGALRM_ACTION=y
64+
CONFIG_SIG_SIGUSR1_ACTION=y
65+
CONFIG_SIG_SIGUSR2_ACTION=y
66+
CONFIG_SPI=y
67+
CONFIG_STACK_COLORATION=y
68+
CONFIG_START_DAY=30
69+
CONFIG_START_MONTH=11
70+
CONFIG_STDIO_BUFFER_SIZE=32
71+
CONFIG_STM32H7_BKPSRAM=y
72+
CONFIG_STM32H7_DMA1=y
73+
CONFIG_STM32H7_OTGFS=y
74+
CONFIG_STM32H7_PROGMEM=y
75+
CONFIG_STM32H7_TIM1=y
76+
CONFIG_SYSTEMTICK_HOOK=y
77+
CONFIG_SYSTEM_CDCACM=y
78+
CONFIG_TASK_NAME_SIZE=24
79+
CONFIG_TTY_SIGINT=y
80+
CONFIG_TTY_SIGINT_CHAR=0x03
81+
CONFIG_TTY_SIGTSTP=y
82+
CONFIG_USBDEV=y
83+
CONFIG_USBDEV_BUSPOWERED=y
84+
CONFIG_USBDEV_MAXPOWER=500
85+
CONFIG_USEC_PER_TICK=1000

0 commit comments

Comments
 (0)