Note: Set all wires up before keeping reading. Negative jumper must go into 3rd pin right column and positive jumper into 4th pin left column (right and left looking ethernet port in pi in front of your eyes)

Upload this content into your pi:

if do not know how to access your pi, connect it to your local network and to your pc or power source and discover hosts with ssh enabled

$> nmap -p 22 -sV 192.168.1.0/24

Then try with default login/passwd:

# Enter with default settings
ssh pi@<IP> # i.e. ssh pi@192.168.1.135
# Use raspberry as passwd

Once got access into your pi, download this gist to your pi

git clone https://gist.github.com/9a77d698f05dbd11fb27c59ee172a48d.git garage_doors && cd garage_doors

Give permissions to setup if neede and run the script to install dependencies:

chmod +x ./scripts/setup.sh
./scripts/setup.sh

After that open a screen session:

screen -S garage_doors
# use <C-a-d> to come back to main shell and then from main shell use screen -r garage_doors
# to kill, type exit within screen session

To run the tests:

chmod +x ./scripts/tests.sh
./scripts/tests.sh

Finally run the process:

sudo python run.py

Note: for connectivity issues, make sure file /etc/network/interfaces is working (i.e ping google.com, or if firewall does not accept pinging, then use curl --silent --head https://google.com)