geth-prysm-node

Step by step guide for setting up a docker-compose.yml for running a Sepolia Ethereum full node using Geth as the execution client and Prysm as the consensus client on an Ubuntu-based system.

Hardware Requirements

OS: Ubuntu 20.04 or later
RAM	CPU	Disk
8-16 GB	4-6 cores	Initially 550 GB SSD - Can grow upto 1 TB

---

Step 1. Install Dependecies

Packages:

sudo apt-get update && sudo apt-get upgrade -y

sudo apt install curl iptables build-essential git wget lz4 jq make gcc nano automake autoconf tmux htop nvme-cli libgbm1 pkg-config libssl-dev libleveldb-dev tar clang bsdmainutils ncdu unzip libleveldb-dev  -y

Docker:

sudo apt update -y && sudo apt upgrade -y
for pkg in docker.io docker-doc docker-compose podman-docker containerd runc; do sudo apt-get remove $pkg; done

sudo apt-get update
sudo apt-get install ca-certificates curl gnupg
sudo install -m 0755 -d /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
sudo chmod a+r /etc/apt/keyrings/docker.gpg

echo \
  "deb [arch="$(dpkg --print-architecture)" signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu \
  "$(. /etc/os-release && echo "$VERSION_CODENAME")" stable" | \
  sudo tee /etc/apt/sources.list.d/docker.list > /dev/null

sudo apt update -y && sudo apt upgrade -y

sudo apt-get install docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin

# Test Docker
sudo docker run hello-world

sudo systemctl enable docker
sudo systemctl restart docker

---

Step 2. Create Directories

mkdir -p /root/ethereum/execution
mkdir -p /root/ethereum/consensus

---

Step 3. Generate the JWT secret:

openssl rand -hex 32 > /root/ethereum/jwt.hex

Verify JWT secrets exist:

cat /root/ethereum/jwt.hex

---

Step 4. Configure docker-compose.yml

cd ethereum

nano docker-compose.yml

• Replace the following code into your docker-compose.yml file:

services:
  geth:
    image: ethereum/client-go:stable
    container_name: geth
    network_mode: host
    restart: unless-stopped
    ports:
      - 30303:30303
      - 30303:30303/udp
      - 8545:8545
      - 8546:8546
      - 8551:8551
    volumes:
      - /root/ethereum/execution:/data
      - /root/ethereum/jwt.hex:/data/jwt.hex
    command:
      - --sepolia
      - --http
      - --http.api=eth,net,web3
      - --http.addr=0.0.0.0
      - --authrpc.addr=0.0.0.0
      - --authrpc.vhosts=*
      - --authrpc.jwtsecret=/data/jwt.hex
      - --authrpc.port=8551
      - --syncmode=snap
      - --datadir=/data
    logging:
      driver: "json-file"
      options:
        max-size: "10m"
        max-file: "3"

  prysm:
    image: gcr.io/prysmaticlabs/prysm/beacon-chain
    container_name: prysm
    network_mode: host
    restart: unless-stopped
    volumes:
      - /root/ethereum/consensus:/data
      - /root/ethereum/jwt.hex:/data/jwt.hex
    depends_on:
      - geth
    ports:
      - 4000:4000
      - 3500:3500
    command:
      - --sepolia
      - --accept-terms-of-use
      - --datadir=/data
      - --disable-monitoring
      - --rpc-host=0.0.0.0
      - --execution-endpoint=http://127.0.0.1:8551
      - --jwt-secret=/data/jwt.hex
      - --rpc-port=4000
      - --grpc-gateway-corsdomain=*
      - --grpc-gateway-host=0.0.0.0
      - --grpc-gateway-port=3500
      - --min-sync-peers=3
      - --checkpoint-sync-url=https://checkpoint-sync.sepolia.ethpandaops.io
      - --genesis-beacon-api-url=https://checkpoint-sync.sepolia.ethpandaops.io
    logging:
      driver: "json-file"
      options:
        max-size: "10m"
        max-file: "3"

---

Step 5. Port conflicts:

• The setup uses ports 30303, 8545, 8546, 8551, 4000, and 3500. Verify they’re free:

netstat -tuln | grep -E '30303|8545|8546|8551|4000|3500'

If a port is in use, edit the docker-compose.yml to map to a different host port (e.g., 8546:8545 to 8547:8545).

Step 6. Run Geth & Prysm Nodes

• Start Geth & Prysm Nodes:

docker compose up -d

• Node Logs

# All lines of logs:
docker compose logs -f

# Last 100 lines of logs:
docker compose logs -fn 100

• As you see in the logs, Prysm is synced, and Geth yet to be synced later.

---

Step 6. Checking If Nodes Are Synced

➡️Execution Node (Geth)

curl -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"eth_syncing","params":[],"id":1}' http://localhost:8545

• ✅Response if fully synced:

{"jsonrpc":"2.0","id":1,"result":false}

• 🚫Response if still syncing:

{"jsonrpc":"2.0","id":1,"result":{"currentBlock":"0x1a2b3c","highestBlock":"0x1a2b4d","startingBlock":"0x0"}}

• You'll see an object with startingBlock, currentBlock, and highestBlock, indicating the sync progress.

➡️Beacon Node (Prysm)

curl http://localhost:3500/eth/v1/node/syncing

• ✅Response if fully synced:

{"data":{"head_slot":"12345","sync_distance":"0","is_syncing":false}}

If is_syncing is false and sync_distance is 0, the beacon node is fully synced.

• 🚫Response if still syncing:

{"data":{"head_slot":"12345","sync_distance":"100","is_syncing":true}}

• If is_syncing is true, the node is still syncing, and sync_distance indicates how many slots behind it is.

---

Step 7. VPS Firewall

• Enable Firewall:

sudo ufw allow 22
sudo ufw allow ssh
sudo ufw enable

• Allow Geth P2P ports:

sudo ufw allow 30303/tcp   # Geth P2P
sudo ufw allow 30303/udp   # Geth P2P

• Allow ports for local use (When your client, e.g. Aztec Sequencer, running locally)

sudo ufw allow from 127.0.0.1 to any port 8545 proto tcp
sudo ufw allow from 127.0.0.1 to any port 3500 proto tcp

• Allow/Deny ports for others IPs: (When your client, e.g. Aztec Sequencer, running on another server)

# Deny ports on all IPs
sudo ufw deny 8545/tcp
sudo ufw deny 3500/tcp

# Allow ports on favorite IPs
sudo ufw allow from <your-vps-ip> to any port 8545 proto tcp
sudo ufw allow from <your-vps-ip> to any port 3500 proto tcp

Replace <your-vps-ip> with the IP you want to allow ports to.

• Reload Firewall:

sudo ufw reload

---

Step 8. Getting the RPC Endpoints

Execution Node (Geth)

Geth provides an HTTP RPC endpoint for interacting with the execution layer of Ethereum. Based on docker-compose.yml setup, Geth exposes port 8545 for HTTP RPC. The endpoints are:

• Inside the VPS: http://localhost:8545
• Outside the VPS: http://<your-vps-ip>:8545 (replace <your-vps-ip> with your VPS’s public IP address, e.g., http://203.0.113.5:8545)
• Aztec Sequencer Execution RPC (Running by CLI): http://<your-vps-ip>:8545
• Aztec Sequencer Execution RPC (Running by docker-compose.yml): http://127.0.0.1:8545 or http://localhost:8545

Beacon Node (Prysm)

Prysm, as the beacon node, offers an HTTP gateway on port 3500. the endpoints are:

• Inside the VPS: http://localhost:3500
• Outside the VPS: http://<your-vps-ip>:3500 (e.g., http://203.0.113.5:3500).
• Aztec Sequencer Consensus Beacon RPC (Running by CLI): http://<your-vps-ip>:3500
• Aztec Sequencer Consensus Beacon RPC (Running by docker-compose.yml): http://127.0.0.1:3500 or http://localhost:3500

Aztec Sequencer Node Guide

---

Step 9. Monitor System

• Monitor your hardware usage:

htop

• Monitor your Disk usage:

df -h

• Monitor Geth Disk usage:

docker exec -it geth du -sh /data

• Monitor Prysm Disk usage:

docker exec -it prysm du -sh /data