Example CRBasic programs for environmental sensors

This repository contains several CRBasic scripts for teaching people how to code Campbell Scientific CR1000 dataloggers using the CRBasic coding language.

Scripts to perform event-based sampling using an ISCO autosampler. Water levels are monitored via a Milone Technologies eTape and a Campbell Scientific datalogger is used to record water levels and trigger sampling.

CR3000 datalogger program for Campbell open-path eddy-covariance systems, by @campbell-scientific

Gas analyzer calibration programs for CRBasic-series data loggers

Source code for the CO2 eddy covariance towers at R. J. Cook Agronomy Farm, a USDA ARS Long-Term Agroecosystem Research (LTAR) site

CRBasic program for logging single ATI sonic anemometer

Source and docs for met tower at Asotin landfill, Lewiston-Clarkston Valley Formaldehyde Study (2016-2017)

Campbell Scientific CSBASIC Basic Event Based Email

CRBasic scripts to collect data using the maximum heat ratio method

CRBasic program to log four ATI sonic anemometers (Dr. Edburg Tukey Orchard Pheromone Experiment, 2012)

This repository contains CRBasic code for testing ZN12-T-2WP point dendrometers with a Campbell Scientific Measurement and Control Datalogger (CR1000).

Custom support software for the CR300 and a specific setup with radiometers at Marambio antarctic base

Repository for my work with a Campbell Scientific CR6 data logger in CRBasic for UART communication with a TFmini Plus LiDAR

Data acquisition for spring 2018 wheat pile dust emissions scoping study

Simple teaching exercise involving CR1000 datalogger, CSAT3B ultrasonic anemometer and 034B vane-prop anemometer.

This repository contains the CRBasic code to run heat-pulse sap flow sensors on a Campbell Scientific CR1000 datalogger. It records both heat-ratio-method and maximum-heat-ratio-method sap flow data. It also contains an R script for processing these data.

Adaptation of the REACCHPNA eddyflux logger program for a vineyard in southeast Washington.

Repository for my work with a Campbell Scientific CR6 data logger in CRBasic for I2C communication with a BNO-055