A WEB Based OBDII Dongle Platform using the ESP32 WROVER Module

Trionic 5/7/8 CANbus flasher with J2534 support

OBD2 CAN Bus Read (ISO 15765-4) with microcontrollers like ESP32

Command line interface for the Peugeot 207 Confort CAN Bus (And others)

A breakout board of MCP25625 for Can BUS communication.

Observable can bus driver, created to speed up development and to provide callbacks to canbus data

Python script to create sequence item from spreadsheet

An esp32 used as a2dp sink attached to the bmw canbus for steering wheel controls

Firmware de equipo configurador que recibe los datos por serial y comunica con el PC y configura el BMS

Development of (BMS) battery management system for MSD700 vehicle powered by Toshiba SCiB Battery

Add mcp2515 to ASUS-tinker

CANBUS SIMULATION WORK

contributed to the development of the communication interface and software architecture for a groundbreaking cubesat satellite project known as IONSAT. This innovative cubesat operates in a very low orbit and is a collaborative effort involving ONERA, CNES, ThrustMe, and École Polytechnique.

Codes i use to make my Verification Prototipe for ECUs with CAN BUS

This repository holds an can hardware independent Arduino library for interfacing with Blink Marine PKP Keypads via CANopen. It includes examples for various CAN interfaces, such as the MCP2515 and Adafruit Feather M4 CAN, and supports multiple Blink Marine Keypads.

Analyzes and displays data from vehicle CAN/J1939 messages

The aim of this project is to simulate a Bus-Off attack on a simple CAN (Controller Area Network) bus, showcasing the dynamics of error handling and frame arbitration in a vehicle communication system. The attack is aimed at forcing a victim ECU (Electronic Control Unit) into a bus-off state, rendering it incapable of communication.

2022 FCU HackerSir, Used to demonstrate communication between can buses.

Firmware para un BMS basado en ATMega328P, MCP2515 y LTC6804

An attempt to use the M5Core with a COMMU module as a CAN logger.