Repository for 'In-house fabrication of 1.3 to 7 mm MAS drive caps using desktop 3D printers'
-
Please cite the reference: 'In-house fabrication of 1.3 to 7 mm MAS drive caps using desktop 3D printers' by Amerein et al.
Link: https://www.sciencedirect.com/science/article/abs/pii/S1090780723000265 -
If you don't have a journal subscription, you can access the manuscript and the Supporting Information here:
Manuscript: https://github.com/tkongooi/MAS_Drive_Caps/blob/main/Manuscript_accepted.pdf
SI Files: https://github.com/tkongooi/MAS_Drive_Caps/tree/main/SI_files -
Raw/Uncorrected designs (not tested): https://github.com/tkongooi/MAS_Drive_Caps/tree/main/Uncorrected%20designs
-
Note that the stl file might appear to be 10x times larger due to to a unit discrepancy between cm and mm. You might want to rescale it by a factor of 10 to ensure a correct dimension.
-
The ipt and stl files included in the SI are the designs after iterative corrections adapted for Form3+ (Formlabs). We have added uncorrected designs (see the 'Uncorrected designs' folder) due to external request. Nevetheless, these designs were based on our personal measurement, and we do not guarantee that it is 100 % correct. _