DO-NOT-MERGE: mptcp: enabled by default (net) #4316
GitHub Actions / Test Results
failed
Jun 18, 2025 in 0s
2 fail, 631 pass in 0s
Annotations
github-actions / Test Results
1 out of 2 runs failed: test: selftest_mptcp_join
results-debug/selftest_mptcp_join.tap.xml
Raw output
not ok 1 test: selftest_mptcp_join # FAIL
# 001 no JOIN
# join Rx [ OK ]
# join Tx [ OK ]
# 002 single subflow, limited by client
# join Rx [ OK ]
# join Tx [ OK ]
# 003 single subflow, limited by server
# join Rx [ OK ]
# join Tx [ OK ]
# 004 single subflow
# join Rx [ OK ]
# join Tx [ OK ]
# 005 multiple subflows
# join Rx [ OK ]
# join Tx [ OK ]
# 006 multiple subflows, limited by server
# join Rx [ OK ]
# join Tx [ OK ]
# 007 single subflow, dev
# join Rx [ OK ]
# join Tx [ OK ]
# 008 no MPC reuse with single endpoint
# join Rx [ OK ]
# join Tx [ OK ]
# 009 multi subflows, with failing subflow
# join Rx [ OK ]
# join Tx [ OK ]
# 010 multi subflows, with subflow timeout
# join Rx [ OK ]
# join Tx [ OK ]
# 011 multi subflows, fair usage on close
# join Rx [ OK ]
# join Tx [ OK ]
# 012 unused signal address
# join Rx [ OK ]
# join Tx [ OK ]
# add addr tx [ OK ]
# add addr echo tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 013 signal address
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 014 subflow and signal
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 015 subflow and signal together
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx server [ OK ]
# add addr echo rx client [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# reset tx client [ OK ]
# reset rx server [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 016 multiple subflows and signal
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 017 signal addresses
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 018 signal invalid addresses
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 019 signal addresses race test
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 020 multiple flows, signal, link failure
# Info: Test file (size 8703 KB) for client
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# stale [FAIL] got 0 stale[s] 0 recover[s], expected stale in range [1..5], stale-recover delta 1
# Server ns stats
# TcpPassiveOpens 4 0.0
# TcpInSegs 4042 0.0
# TcpOutSegs 4018 0.0
# TcpExtDelayedACKs 5 0.0
# TcpExtDelayedACKLost 1 0.0
# TcpExtTCPPureAcks 17 0.0
# TcpExtTCPDSACKOldSent 1 0.0
# TcpExtTCPOFOQueue 1 0.0
# TcpExtTCPOrigDataSent 5 0.0
# TcpExtTCPDelivered 5 0.0
# MPTcpExtMPCapableSYNRX 1 0.0
# MPTcpExtMPCapableACKRX 1 0.0
# MPTcpExtMPJoinSynRx 3 0.0
# MPTcpExtMPJoinAckRx 3 0.0
# MPTcpExtOFOQueueTail 1095 0.0
# MPTcpExtOFOQueue 2317 0.0
# MPTcpExtOFOMerge 1042 0.0
# MPTcpExtAddAddrTx 1 0.0
# MPTcpExtEchoAdd 1 0.0
# MPTcpExtRcvWndShared 2049 0.0
# MPTcpExtRcvWndConflictUpdate 1 0.0
# MPTcpExtRcvWndConflict 1 0.0
# Client ns stats
# TcpActiveOpens 4 0.0
# TcpInSegs 4012 0.0
# TcpOutSegs 13156 0.0
# TcpRetransSegs 2 0.0
# TcpExtTW 3 0.0
# TcpExtTCPPureAcks 4003 0.0
# TcpExtTCPSackRecovery 1 0.0
# TcpExtTCPSACKReorder 1 0.0
# TcpExtTCPTSReorder 1 0.0
# TcpExtTCPPartialUndo 1 0.0
# TcpExtTCPLostRetransmit 1 0.0
# TcpExtTCPFastRetrans 1 0.0
# TcpExtTCPTimeouts 5 0.0
# TcpExtTCPLossProbes 1 0.0
# TcpExtTCPDSACKRecv 1 0.0
# TcpExtTCPDSACKIgnoredNoUndo 1 0.0
# TcpExtTCPSackShiftFallback 1 0.0
# TcpExtTCPSpuriousRtxHostQueues 4 0.0
# TcpExtTCPAutoCorking 1 0.0
# TcpExtTCPOrigDataSent 13134 0.0
# TcpExtTCPHystartTrainDetect 2 0.0
# TcpExtTCPHystartTrainCwnd 40 0.0
# TcpExtTCPHystartDelayDetect 2 0.0
# TcpExtTCPHystartDelayCwnd 263 0.0
# TcpExtTCPDelivered 13129 0.0
# TcpExtTcpTimeoutRehash 5 0.0
# TcpExtTCPDSACKRecvSegs 1 0.0
# MPTcpExtMPCapableSYNTX 1 0.0
# MPTcpExtMPCapableSYNACKRX 1 0.0
# MPTcpExtMPTCPRetrans 3 0.0
# MPTcpExtMPJoinSynAckRx 3 0.0
# MPTcpExtMPJoinSynTx 3 0.0
# MPTcpExtAddAddr 1 0.0
# MPTcpExtEchoAddTx 1 0.0
# MPTcpExtSndWndShared 6 0.0
# MPTcpExtRcvWndShared 6 0.0
# ns2-o7HPbo stats
# 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
# link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
# RX: bytes packets errors dropped missed mcast
# 1836 4 0 0 0 0
# TX: bytes packets errors dropped carrier collsns
# 1836 4 0 0 0 0
# 2: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000
# link/sit 0.0.0.0 brd 0.0.0.0
# RX: bytes packets errors dropped missed mcast
# 0 0 0 0 0 0
# TX: bytes packets errors dropped carrier collsns
# 0 0 0 0 0 0
# 3: ns2eth1@if3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc netem state DOWN mode DEFAULT group default qlen 1000
# link/ether da:ec:35:29:c2:29 brd ff:ff:ff:ff:ff:ff link-netns ns1-q6yi8H
# RX: bytes packets errors dropped missed mcast
# 35436 438 0 0 0 0
# TX: bytes packets errors dropped carrier collsns
# 2267832 444 0 7 0 0
# 4: ns2eth2@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc netem state UP mode DEFAULT group default qlen 1000
# link/ether a6:df:46:bc:e7:6b brd ff:ff:ff:ff:ff:ff link-netns ns1-q6yi8H
# RX: bytes packets errors dropped missed mcast
# 93054 1191 0 0 0 0
# TX: bytes packets errors dropped carrier collsns
# 5232933 1198 0 0 0 0
# 5: ns2eth3@if5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc netem state UP mode DEFAULT group default qlen 1000
# link/ether 3a:ec:3c:00:b4:8f brd ff:ff:ff:ff:ff:ff link-netns ns1-q6yi8H
# RX: bytes packets errors dropped missed mcast
# 94450 1209 0 0 0 0
# TX: bytes packets errors dropped carrier collsns
# 5325537 1221 0 0 0 0
# 6: ns2eth4@if6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc netem state UP mode DEFAULT group default qlen 1000
# link/ether 26:be:5d:c8:ee:54 brd ff:ff:ff:ff:ff:ff link-netns ns1-q6yi8H
# RX: bytes packets errors dropped missed mcast
# 94668 1212 0 0 0 0
# TX: bytes packets errors dropped carrier collsns
# 5381722 1217 0 0 0 0
# MPTcpExtMPCapableSYNTX 1 0.0
# MPTcpExtMPCapableSYNACKRX 1 0.0
# MPTcpExtMPTCPRetrans 3 0.0
# MPTcpExtMPJoinSynAckRx 3 0.0
# MPTcpExtMPJoinSynTx 3 0.0
# MPTcpExtAddAddr 1 0.0
# MPTcpExtEchoAddTx 1 0.0
# MPTcpExtSndWndShared 6 0.0
# MPTcpExtRcvWndShared 6 0.0
# 021 multi flows, signal, bidi, link fail
# Info: Test file (size 32768 KB) for server
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# stale [ OK ]
# 022 backup subflow unused, link failure
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# link usage [ OK ]
# 023 backup flow used, multi links fail
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# stale [ OK ]
# link usage [ OK ]
# 024 backup flow used, bidi, link failure
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# stale [ OK ]
# link usage [ OK ]
# 025 signal address, ADD_ADDR timeout
# join Rx [ OK ]
# join Tx [ OK ]
# add addr tx [ OK ]
# add addr echo tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 026 signal address, ADD_ADDR6 timeout
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 027 signal addresses, ADD_ADDR timeout
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 028 invalid address, ADD_ADDR timeout
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 029 remove single subflow
# join Rx [ OK ]
# join Tx [ OK ]
# rm addr tx client [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 030 remove multiple subflows
# join Rx [ OK ]
# join Tx [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 031 remove single address
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 032 remove subflow and signal
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 033 remove subflows and signal
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 034 remove addresses
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 035 remove invalid addresses
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 036 flush subflows and signal
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 037 flush subflows
# join Rx [ OK ]
# join Tx [ OK ]
# rm addr tx client [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 038 flush addresses
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 039 flush invalid addresses
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 040 remove id 0 subflow
# join Rx [ OK ]
# join Tx [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 041 remove id 0 address
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# reset tx client [ OK ]
# reset rx server [ OK ]
# 042 add single subflow
# currently established: 1 [ OK ]
# join Rx [ OK ]
# join Tx [ OK ]
# currently established: 0 [ OK ]
# 043 add signal address
# currently established: 1 [ OK ]
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# currently established: 0 [ OK ]
# 044 add multiple subflows
# currently established: 1 [ OK ]
# join Rx [ OK ]
# join Tx [ OK ]
# currently established: 0 [ OK ]
# 045 add multiple subflows IPv6
# currently established: 1 [ OK ]
# join Rx [ OK ]
# join Tx [ OK ]
# currently established: 0 [ OK ]
# 046 add multiple addresses IPv6
# currently established: 1 [ OK ]
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# currently established: 0 [ OK ]
# 047 single subflow IPv6
# join Rx [ OK ]
# join Tx [ OK ]
# 048 unused signal address IPv6
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 049 single address IPv6
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 050 remove single address IPv6
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# 051 remove subflow and signal IPv6
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# 052 single subflow IPv4-mapped
# join Rx [ OK ]
# join Tx [ OK ]
# 053 signal address IPv4-mapped
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 054 single subflow v4-map-v6
# join Rx [ OK ]
# join Tx [ OK ]
# 055 signal address v4-map-v6
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 056 single subflow v6-map-v4
# join Rx [ OK ]
# join Tx [ OK ]
# 057 signal address v6-map-v4
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 058 no JOIN with diff families v4-v6
# join Rx [ OK ]
# join Tx [ OK ]
# 059 no JOIN with diff families v4-v6-2
# join Rx [ OK ]
# join Tx [ OK ]
# 060 no JOIN with diff families v6-v4
# join Rx [ OK ]
# join Tx [ OK ]
# 061 IPv4 sockets do not use IPv6 addresses
# join Rx [ OK ]
# join Tx [ OK ]
# 062 simult IPv4 and IPv6 subflows
# join Rx [ OK ]
# join Tx [ OK ]
# 063 simult IPv4 and IPv6 subflows, fullmesh 1x1
# join Rx [ OK ]
# join Tx [ OK ]
# 064 simult IPv4 and IPv6 subflows, fullmesh 2x2
# join Rx [ OK ]
# join Tx [ OK ]
# 065 single subflow, backup
# join Rx [ OK ]
# join Tx [ OK ]
# mp_prio tx server [ OK ]
# mp_prio rx client [ OK ]
# syn backup [ OK ]
# synack backup [ OK ]
# 066 single address, backup
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# mp_prio tx server [ OK ]
# mp_prio rx client [ OK ]
# syn backup [ OK ]
# synack backup [ OK ]
# 067 single address, switch to backup
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# mp_prio tx server [ OK ]
# mp_prio rx client [ OK ]
# syn backup [ OK ]
# synack backup [ OK ]
# 068 single address with port, backup
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# mp_prio tx server [ OK ]
# mp_prio rx client [ OK ]
# syn backup [ OK ]
# synack backup [ OK ]
# 069 mpc backup
# join Rx [ OK ]
# join Tx [ OK ]
# mp_prio tx server [ OK ]
# mp_prio rx client [ OK ]
# syn backup [ OK ]
# synack backup [ OK ]
# 070 mpc backup both sides
# join Rx [ OK ]
# join Tx [ OK ]
# mp_prio tx server [ OK ]
# mp_prio rx client [ OK ]
# syn backup [ OK ]
# synack backup [ OK ]
# 071 mpc switch to backup
# join Rx [ OK ]
# join Tx [ OK ]
# mp_prio tx server [ OK ]
# mp_prio rx client [ OK ]
# syn backup [ OK ]
# synack backup [ OK ]
# 072 mpc switch to backup both sides
# join Rx [ OK ]
# join Tx [ OK ]
# mp_prio tx server [ OK ]
# mp_prio rx client [ OK ]
# syn backup [ OK ]
# synack backup [ OK ]
# 073 signal address with port
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# add addr rx with port [ OK ]
# syn rx port [ OK ]
# synack rx port [ OK ]
# ack rx port [ OK ]
# syn rx port mismatch [ OK ]
# ack rx port mismatch [ OK ]
# 074 subflow and signal with port
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# add addr rx with port [ OK ]
# syn rx port [ OK ]
# synack rx port [ OK ]
# ack rx port [ OK ]
# syn rx port mismatch [ OK ]
# ack rx port mismatch [ OK ]
# 075 remove single address with port
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# add addr rx with port [ OK ]
# syn rx port [ OK ]
# synack rx port [ OK ]
# ack rx port [ OK ]
# syn rx port mismatch [ OK ]
# ack rx port mismatch [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# LISTENER_CREATED 10.0.2.1:10100 [ OK ]
# LISTENER_CLOSED 10.0.2.1:10100 [ OK ]
# 076 remove subflow and signal with port
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# add addr rx with port [ OK ]
# syn rx port [ OK ]
# synack rx port [ OK ]
# ack rx port [ OK ]
# syn rx port mismatch [ OK ]
# ack rx port mismatch [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# 077 flush subflows and signal with port
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# 078 multiple addresses with port
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# add addr rx with port [ OK ]
# syn rx port [ OK ]
# synack rx port [ OK ]
# ack rx port [ OK ]
# syn rx port mismatch [ OK ]
# ack rx port mismatch [ OK ]
# 079 multiple addresses with ports
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# add addr rx with port [ OK ]
# syn rx port [ OK ]
# synack rx port [ OK ]
# ack rx port [ OK ]
# syn rx port mismatch [ OK ]
# ack rx port mismatch [ OK ]
# 080 port-based signal endpoint must not accept mpc
# Connect [ OK ]
# Attempts [ OK ]
# 081 single subflow with syn cookies
# join Rx [ OK ]
# join Tx [ OK ]
# 082 multiple subflows with syn cookies
# join Rx [ OK ]
# join Tx [ OK ]
# 083 subflows limited by server w cookies
# join Rx [ OK ]
# join Tx [ OK ]
# 084 signal address with syn cookies
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 085 subflow and signal w cookies
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 086 subflows and signal w. cookies
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 087 checksum test 0 0
# join Rx [ OK ]
# join Tx [ OK ]
# checksum server [ OK ]
# checksum client [ OK ]
# fail tx server [ OK ]
# fail rx client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# infi tx client [ OK ]
# infi rx server [ OK ]
# 088 checksum test 1 1
# join Rx [ OK ]
# join Tx [ OK ]
# checksum server [ OK ]
# checksum client [ OK ]
# fail tx server [ OK ]
# fail rx client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# infi tx client [ OK ]
# infi rx server [ OK ]
# 089 checksum test 0 1
# join Rx [ OK ]
# join Tx [ OK ]
# checksum server [ OK ]
# checksum client [ OK ]
# fail tx server [ OK ]
# fail rx client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# infi tx client [ OK ]
# infi rx server [ OK ]
# 090 checksum test 1 0
# join Rx [ OK ]
# join Tx [ OK ]
# checksum server [ OK ]
# checksum client [ OK ]
# fail tx server [ OK ]
# fail rx client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# infi tx client [ OK ]
# infi rx server [ OK ]
# 091 single subflow allow join id0 ns1
# join Rx [ OK ]
# join Tx [ OK ]
# 092 single subflow allow join id0 ns2
# join Rx [ OK ]
# join Tx [ OK ]
# 093 signal address allow join id0 ns1
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 094 signal address allow join id0 ns2
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 095 subflow and address allow join id0 1
# join Rx [ OK ]
# join Tx [ OK ]
# 096 subflow and address allow join id0 2
# join Rx [ OK ]
# join Tx [ OK ]
# 097 fullmesh test 2x1
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 098 fullmesh test 1x1
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 099 fullmesh test 1x2
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 100 fullmesh test 1x2, limited
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 101 set fullmesh flag test
# join Rx [ OK ]
# join Tx [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# 102 set nofullmesh flag test
# join Rx [ OK ]
# join Tx [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# 103 set backup,fullmesh flags test
# join Rx [ OK ]
# join Tx [ OK ]
# mp_prio tx server [ OK ]
# mp_prio rx client [ OK ]
# syn backup [ OK ]
# synack backup [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# 104 set nobackup,nofullmesh flags test
# join Rx [ OK ]
# join Tx [ OK ]
# mp_prio tx server [ OK ]
# mp_prio rx client [ OK ]
# syn backup [ OK ]
# synack backup [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# 105 fastclose test
# Info: Test file (size 1024 KB) for client
# Info: Test file (size 1024 KB) for server
# join Rx [ OK ]
# join Tx [ OK ]
# fast close tx client [ OK ]
# fast close rx server [ OK ]
# reset tx client [ OK ]
# reset rx server [ OK ]
# 106 fastclose server test
# Info: Test file (size 1024 KB) for client
# Info: Test file (size 1024 KB) for server
# join Rx [ OK ]
# join Tx [ OK ]
# fast close tx server [ OK ]
# fast close rx client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# 107 Infinite map
# Info: Test file (size 128 KB) for client
# Info: Test file (size 128 KB) for server
# Info: file received by server has inverted byte at 169
# Info: 5 corrupted pkts
# join Rx [ OK ]
# join Tx [ OK ]
# checksum server [ OK ]
# checksum client [ OK ]
# fail tx server [ OK ]
# fail rx client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# infi tx client [ OK ]
# infi rx server [ OK ]
# fail tx client [ OK ]
# fail rx server [ OK ]
# 108 MP_FAIL MP_RST
# Info: Test file (size 1024 KB) for client
# Info: Test file (size 1024 KB) for server
# Info: 1 corrupted pkts
# join Rx [ OK ]
# join Tx [ OK ]
# checksum server [ OK ]
# checksum client [ OK ]
# fail tx server [ OK ]
# fail rx client [ OK ]
# reset tx server [ OK ]
# reset rx client [ OK ]
# infi tx client [ OK ]
# infi rx server [ OK ]
# 109 userspace pm type prevents add_addr
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 110 userspace pm no echo w/o daemon
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# 111 userspace pm type rejects join
# join Rx [ OK ]
# join Tx [ OK ]
# 112 userspace pm type does not send join
# join Rx [ OK ]
# join Tx [ OK ]
# 113 userspace pm type prevents mp_prio
# join Rx [ OK ]
# join Tx [ OK ]
# mp_prio tx server [ OK ]
# mp_prio rx client [ OK ]
# syn backup [ OK ]
# synack backup [ OK ]
# 114 userspace pm type prevents rm_addr
# join Rx [ OK ]
# join Tx [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# 115 userspace pm add & remove address
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# mptcp_info subflows=2:2 [ OK ]
# mptcp_info subflows_total=3:3 [ OK ]
# mptcp_info add_addr_signal=2:2 [ OK ]
# dump addrs signal [ OK ]
# get id 10 addr [ OK ]
# get id 20 addr [ OK ]
# dump addrs after rm_sf 10 [ OK ]
# dump addrs after rm_addr 20 [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# mptcp_info subflows=0:0 [ OK ]
# mptcp_info subflows_total=1:1 [ OK ]
# 116 userspace pm create destroy subflow
# join Rx [ OK ]
# join Tx [ OK ]
# mptcp_info subflows=1:1 [ OK ]
# mptcp_info subflows_total=2:2 [ OK ]
# dump addrs subflow [ OK ]
# get id 20 addr [ OK ]
# dump addrs after rm_sf 20 [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# mptcp_info subflows=0:0 [ OK ]
# mptcp_info subflows_total=1:1 [ OK ]
# 117 userspace pm create id 0 subflow
# mptcp_info subflows=0:0 [ OK ]
# mptcp_info subflows_total=1:1 [ OK ]
# dump addrs id 0 subflow [ OK ]
# join Rx [ OK ]
# join Tx [ OK ]
# mptcp_info subflows=1:1 [ OK ]
# mptcp_info subflows_total=2:2 [ OK ]
# 118 userspace pm remove initial subflow
# join Rx [ OK ]
# join Tx [ OK ]
# mptcp_info subflows=1:1 [ OK ]
# mptcp_info subflows_total=2:2 [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# reset tx client [ OK ]
# reset rx server [ OK ]
# mptcp_info subflows=1:1 [ OK ]
# mptcp_info subflows_total=1:1 [ OK ]
# 119 userspace pm send RM_ADDR for ID 0
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# mptcp_info subflows=1:1 [ OK ]
# mptcp_info subflows_total=2:2 [ OK ]
# mptcp_info add_addr_signal=1:1 [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# reset tx client [ OK ]
# reset rx server [ OK ]
# mptcp_info subflows=1:1 [ OK ]
# mptcp_info subflows_total=1:1 [ OK ]
# 120 implicit EP
# creation [ OK ]
# mptcp_info subflows=1:1 [ OK ]
# mptcp_info add_addr_signal=1:1 [ OK ]
# ID change is prevented [ OK ]
# modif is allowed [ OK ]
# 121 delete and re-add
# Info: Test file (size 4 KB) for client
# Info: Test file (size 4 KB) for server
# creation [ OK ]
# before delete id 2 [ OK ]
# mptcp_info subflows=1:1 [ OK ]
# after delete id 2 [ OK ]
# mptcp_info subflows=0:0 [ OK ]
# after re-add id 2 [ OK ]
# mptcp_info subflows=1:1 [ OK ]
# after new reject [ OK ]
# mptcp_info subflows=1:1 [ OK ]
# after no reject [ OK ]
# mptcp_info subflows=2:2 [ OK ]
# after delete id 0 (1) [ OK ]
# mptcp_info subflows=2:2 [ OK ]
# after re-add id 0 (1) [ OK ]
# mptcp_info subflows=3:3 [ OK ]
# after delete id 0 (2) [ OK ]
# mptcp_info subflows=2:2 [ OK ]
# after re-add id 0 (2) [ OK ]
# mptcp_info subflows=3:3 [ OK ]
# after delete id 0 (3) [ OK ]
# mptcp_info subflows=2:2 [ OK ]
# after re-add id 0 (3) [ OK ]
# mptcp_info subflows=3:3 [ OK ]
# event ns1 LISTENER_CREATED (1) [ OK ]
# event ns1 CREATED (1) [ OK ]
# event ns1 ESTABLISHED (1) [ OK ]
# event ns1 ANNOUNCED (0) [ OK ]
# event ns1 REMOVED (4) [ OK ]
# event ns1 SUB_ESTABLISHED (6) [ OK ]
# event ns1 SUB_CLOSED (4) [ OK ]
# event ns2 CREATED (1) [ OK ]
# event ns2 ESTABLISHED (1) [ OK ]
# event ns2 ANNOUNCED (0) [ OK ]
# event ns2 REMOVED (0) [ OK ]
# event ns2 SUB_ESTABLISHED (6) [ OK ]
# event ns2 SUB_CLOSED (5) [ OK ]
# join Rx [ OK ]
# join Tx [ OK ]
# rm addr rx server [ OK ]
# rm subflow client [ OK ]
# 122 delete re-add signal
# Info: Test file (size 4 KB) for client
# Info: Test file (size 4 KB) for server
# creation [ OK ]
# before delete [ OK ]
# mptcp_info subflows=1:1 [ OK ]
# after delete [ OK ]
# mptcp_info subflows=0:0 [ OK ]
# after re-add [ OK ]
# mptcp_info subflows=2:2 [ OK ]
# after delete ID 0 [ OK ]
# mptcp_info subflows=2:2 [ OK ]
# after re-add ID 0 [ OK ]
# mptcp_info subflows=3:3 [ OK ]
# after re-delete ID 0 [ OK ]
# mptcp_info subflows=2:2 [ OK ]
# after re-re-add ID 0 [ OK ]
# mptcp_info subflows=3:3 [ OK ]
# event ns1 LISTENER_CREATED (1) [ OK ]
# event ns1 CREATED (1) [ OK ]
# event ns1 ESTABLISHED (1) [ OK ]
# event ns1 ANNOUNCED (0) [ OK ]
# event ns1 REMOVED (0) [ OK ]
# event ns1 SUB_ESTABLISHED (5) [ OK ]
# event ns1 SUB_CLOSED (3) [ OK ]
# event ns2 CREATED (1) [ OK ]
# event ns2 ESTABLISHED (1) [ OK ]
# event ns2 ANNOUNCED (6) [ OK ]
# event ns2 REMOVED (4) [ OK ]
# event ns2 SUB_ESTABLISHED (5) [ OK ]
# event ns2 SUB_CLOSED (3) [ OK ]
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
# 123 flush re-add
# Info: Test file (size 4 KB) for client
# Info: Test file (size 4 KB) for server
# before flush [ OK ]
# mptcp_info subflows=0:0 [ OK ]
# join Rx [ OK ]
# join Tx [ OK ]
# add addr rx [ OK ]
# add addr echo rx [ OK ]
# rm addr rx client [ OK ]
# rm subflow server [ OK ]
#
# 1 failure(s) has(ve) been detected:
# ^I- 20: multiple flows, signal, link failure
#
#
# time=1954
github-actions / Test Results
1 out of 2 runs failed: mptcp_join: multiple flows, signal, link failure
results-debug/selftest_mptcp_join_subtests.tap.xml
Raw output
not ok 20 - mptcp_join: multiple flows, signal, link failure # time=21939ms
Loading