Nix System Configuration

This repository manages system configurations for all of my macOS, nixOS, and linux machines.

Structure

This repository is a flake. All system configurations are defined in flake.nix. Platform specific configurations are found defined in the flake outputs darwinConfigurations, nixosConfigurations for macOS and NixOS respectively.

Overlapping Nix-Darwin and NixOS

Nix-Darwin and NixOS configurations share as much overlap as possible in the common module, ./modules/common.nix. Platform specific modules add onto the common module in ./modules/darwin/default.nix and ./modules/nixos/default.nix for macOS and NixOS respectively.

Decoupled Home Manager Configuration

My home-manager configuration is entirely decoupled from NixOS and nix-darwin configurations. This means that all of its modules are found in ./modules/home-manager. These modules are imported into all other configurations in the common module similarly to this:

{ config, pkgs, ... }: {
  home-manager.users.kclejeune = import ./home-manager/home.nix;
}

This means that home.nix is fully compatible as a standalone configuration, managed with the home-manager CLI. This allows close replication of any user config for any linux system running nix. These configurations are defined in the homeConfigurations output.

User Customization

User "profiles" are specified in ./profiles; these modules configure contextual, identity-specific settings such as SSL certificates or work vs. personal email addresses. When possible, home-manager functionality is extracted into ./profiles/home-manager, as mentioned previously

Installing a Configuration

Non-NixOS Prerequisite: Install Nix Package Manager

Run the installer script to perform a multi-user installation on darwin or linux:

curl --proto '=https' --tlsv1.2 -sSf -L https://install.determinate.systems/nix | sh -s -- install --determinate

Note that this step is naturally skipped on NixOS since nix is the package manager by default.

System Bootstrapping

NixOS

Follow the installation instructions, then run

sudo nixos-install --flake "github:kclejeune/system#kclejeune@x86_64-linux"

Darwin/Linux

Clone this repository into ~/.nixpkgs with

git clone https://github.com/kclejeune/system ~/.nixpkgs

You can bootstrap a new system with the bootstrap command:

nix run .#sysdo bootstrap

This will attempt to detect the host system and install nix-darwin or home-manager, but this behavior can be overridden using the --darwin or --home-manager flags.

sysdo CLI

The sysdo utility is a python script that wraps nix, darwin-rebuild, nixos-rebuild, and home-manager commands to provide a consistent interface across multiple platforms. It has some dependencies which are defined in the devShell flake output. Source for this tool is found in pkgs/sysdo/sysdo.py.