Homepage | Docs | Developers

Omnichain Fungible Token (OFT) Solana Example

Requirements

• Rust v1.75.0
• Anchor v0.29
• Solana CLI v1.17.31
• Docker
• Node.js

Setup

We recommend using pnpm as a package manager (but you can of course use a package manager of your choice).

Docker is required to build using anchor. We highly recommend that you use the most up-to-date Docker version to avoid any issues with anchor builds.

⚠️ You need anchor version 0.29 and solana version 1.17.31 specifically to compile the build artifacts. Using higher Anchor and Solana versions can introduce unexpected issues during compilation. See the following issues in Anchor's repo: 1, 2. After compiling the correct build artifacts, you can change the Solana version to higher versions.

Install Rust

curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y

Install Solana

sh -c "$(curl -sSfL https://release.anza.xyz/v1.17.31/install)"

Install Anchor

Install and use the correct version

cargo install --git https://github.com/coral-xyz/anchor --tag v0.29.0 anchor-cli --locked

Get the code

LZ_ENABLE_SOLANA_OFT_EXAMPLE=1 npx create-lz-oapp@latest

Make sure you select the OFT (Solana) example from the dropdown:

✔ Where do you want to start your project? … ./example
? Which example would you like to use as a starting point? › - Use arrow-keys. Return to submit.
    OApp
    OFT
    OFTAdapter
    ONFT721
❯   OFT (Solana)

Installing Dependencies

pnpm install

Running tests

pnpm test

Get Devnet SOL

solana airdrop 5 -u devnet

We recommend that you request 5 devnet SOL, which should be sufficient for this walkthrough. For the example here, we will be using Solana Devnet. If you hit rate limits, you can also use the official Solana faucet.

Prepare .env

cp .env.example .env

Solana Keypair

By default, the scripts will use the keypair at the default location ~/.config/solana/id.json. If you want to use this keypair, there is no need to set any environment variable. There will, however, be a prompt when running certain commands to confirm that you want to use the default keypair.

If you wish to use a different keypair, then you can set either of the following in the .env:

1. SOLANA_PRIVATE_KEY - this can be either in base58 string format (i.e. when imported from a wallet) or the Uint8 Array in string format (all in one line, e.g. [1,1,...1]).

2. SOLANA_KEYPAIR_PATH - the location to the keypair file that you want to use.

Solana RPC

Also set the RPC_URL_SOLANA_TESTNET value. Note that while the naming used here is TESTNET, it refers to the Solana Devnet. We use TESTNET to keep it consistent with the existing EVM testnets.

Deploy

Prepare the OFT Program ID

Create programId keypair files by running:

solana-keygen new -o target/deploy/endpoint-keypair.json --force
solana-keygen new -o target/deploy/oft-keypair.json --force

anchor keys sync

⚠️ --force flag overwrites the existing keys with the ones you generate.

Run

anchor keys list

to view the generated programIds (public keys). The output should look something like this:

endpoint: <ENDPOINT_PROGRAM_ID>
oft: <OFT_PROGRAM_ID>

Copy the OFT's program ID, which you will use in the build step.

Building and Deploying the Solana OFT Program

Ensure you have Docker running before running the build command.

Build the Solana OFT program

anchor build -v -e OFT_ID=<OFT_PROGRAM_ID>

Where <OFT_PROGRAM_ID> is replaced with your OFT Program ID copied from the previous step.

Preview Rent Costs for the Solana OFT

ℹ️ The majority of the SOL required to deploy your program will be for rent (specifically, for the minimum balance of SOL required for rent-exemption), which is calculated based on the amount of bytes the program or account uses. Programs typically require more rent than PDAs as more bytes are required to store the program's executable code.

In our case, the OFT Program's rent accounts for roughly 99% of the SOL needed during deployment, while the other accounts' rent, OFT Store, Mint, Mint Authority Multisig and Escrow make up for only a fraction of the SOL needed.

You can preview how much SOL would be needed for the program account. Note that the total SOL required would to be slightly higher than just this, to account for the other accounts that need to be created.

solana rent $(wc -c < target/verifiable/oft.so)

You should see an output such as

Rent-exempt minimum: 3.87415872 SOL

ℹ️ LayerZero's default deployment path for Solana OFTs require you to deploy your own OFT program as this means you own the Upgrade Authority and don't rely on LayerZero to manage that authority for you. Read this to understand more no why this is important.

Deploy the Solana OFT

While for building, we must use Solana v1.17.31, for deploying, we will be using v1.18.26 as it provides an improved program deployment experience (i.e. ability to attach priority fees and also exact-sized on-chain program length which prevents needing to provide 2x the rent as in v1.17.31).

Temporarily switch to Solana v1.18.26

First, we switch to Solana v1.18.26 (remember to switch back to v1.17.31 later)

sh -c "$(curl -sSfL https://release.anza.xyz/v1.18.26/install)"

(Recommended) Deploying with a priority fee

The deploy command will run with a priority fee. Read the section on 'Deploying Solana programs with a priority fee ' to learn more.

Run the deploy command

solana program deploy --program-id target/deploy/oft-keypair.json target/verifiable/oft.so -u devnet --with-compute-unit-price <COMPUTE_UNIT_PRICE_IN_MICRO_LAMPORTS>

ℹ️ the -u flag specifies the RPC URL that should be used. The options are mainnet-beta, devnet, testnet, localhost, which also have their respective shorthands: -um, -ud, -ut, -ul

⚠️ If the deployment is slow, it could be that the network is congested and you might need to increase the priority fee.

Switch back to Solana 1.17.31

⚠️ After deploying, make sure to switch back to v1.17.31 after deploying. If you need to rebuild artifacts, you must use Solana CLI version 1.17.31 and Anchor version 0.29.0

sh -c "$(curl -sSfL https://release.anza.xyz/v1.17.31/install)"

Create the Solana OFT

ℹ️ For OFT and OFT Mint-and-Burn Adapter, the SPL token's Mint Authority is set to the Mint Authority Multisig, which always has the OFT Store as a signer. The multisig is fixed to needing 1 of N signatures.

ℹ️ For OFT and OFT Mint-And-Burn Adapter, you have the option to specify additional signers through the --additional-minters flag. If you choose not to, you must pass in --only-oft-store true, which means only the OFT Store will be a signer for the _Mint Authority Multisig*.

⚠️ If you choose to go with --only-oft-store, you will not be able to add in other signers/minters or update the Mint Authority, and the Freeze Authority will be immediately renounced. The token Mint Authority will be fixed Mint Authority Multisig address while the Freeze Authority will be set to None.

For OFT:

pnpm hardhat lz:oft:solana:create --eid 40168 --program-id <PROGRAM_ID>

⚠️ Use --additional-minters flag to add a CSV of additional minter addresses to the Mint Authority Multisig. If you do not want to, you must specify --only-oft-store true.

ℹ️ You can also specify --amount <AMOUNT> to have the OFT minted to your deployer address upon token creation.

For OFTAdapter:

pnpm hardhat lz:oft-adapter:solana:create --eid 40168 --program-id <PROGRAM_ID> --mint <TOKEN_MINT> --token-program <TOKEN_PROGRAM_ID>

ℹ️ You can use OFT Adapter if you want to use an existing token on Solana. For OFT Adapter, tokens will be locked when sending to other chains and unlocked when receiving from other chains.

For OFT Mint-And-Burn Adapter (MABA):

pnpm hardhat lz:oft:solana:create --eid 40168 --program-id <PROGRAM_ID> --mint <TOKEN_MINT> --token-program <TOKEN_PROGRAM_ID>

ℹ️ You can use OFT Mint-And-Burn Adapter if you want to use an existing token on Solana. For OFT Mint-And-Burn Adapter, tokens will be burned when sending to other chains and minted when receiving from other chains.

⚠️ You cannot use this option if your token's Mint Authority has been renounced.

⚠️ Note that for MABA mode, before attempting any cross-chain transfers, you must transfer the Mint Authority for lz_receive to work, as that is not handled in the script (since you are using an existing token). If you opted for --additional-minters, then you must transfer the Mint Authority to the newly created multisig (this is the mintAuthority value in the /deployments/solana-<mainnet/testnet>/OFT.json). If not, then it should be set to the OFT Store address, which is oftStore in the same file.

Note on the LZ Config file, layerzero.config.ts

In layerzero.config.ts, the solanaContract.address is auto-populated with the oftStore address from the deployment file, which has the default path of deployments/solana-<mainnet/testnet>.

const solanaContract: OmniPointHardhat = {
  eid: EndpointId.SOLANA_V2_TESTNET,
  address: getOftStoreAddress(EndpointId.SOLANA_V2_TESTNET),
};

⚠️ Ensure that you address is specified only for the solana contract object. Do not specify addresses for the EVM chain contract objects. Under the hood, we use hardhat-deploy to retrieve the contract addresses of the deployed EVM chain contracts. You will run into an error if you specify address for an EVM chain contract object.

Deploy a sepolia OFT peer

pnpm hardhat lz:deploy # follow the prompts

Note: If you are on testnet, consider using MyOFTMock to allow test token minting. If you do use MyOFTMock, make sure to update the sepoliaContract.contractName in layerzero.config.ts to MyOFTMock.

Initialize the OFT Program's SendConfig and ReceiveConfig Accounts

⚠️ Do this only when initializing the OFT for the first time. The only exception is if a new pathway is added later. If so, run this again to properly initialize the pathway.

Run the following command to init the pathway config. This step is unique to pathways that involve Solana.

npx hardhat lz:oft:solana:init-config --oapp-config layerzero.config.ts

Wire

Run the following to wire the pathways specified in your layerzero.config.ts

npx hardhat lz:oapp:wire --oapp-config layerzero.config.ts

With a squads multisig, you can simply append the --multisig-key flag to the end of the above command.

Mint OFT on Solana

This is only relevant for OFT. If you opted to include the --amount flag in the create step, that means you already have minted some Solana OFT and you can skip this section.

ℹ️ This is only possible if you specified your deployer address as part of the --additional-minters flag when creating the Solana OFT. If you had chosen --only-oft-store true, you will not be able to mint your OFT on Solana.

First, you need to create the Associated Token Account for your address.

spl-token create-account <TOKEN_MINT>

Then, you can mint. Note that the spl-token CLI expects the human-readable token amount and not the raw integer value for the <AMOUNT> param. This means, to mint 1 OFT, you would specify 1 as the amount. The spl-token handles the multiplication by 10^decimals for you.

spl-token mint <TOKEN_MINT> <AMOUNT> --multisig-signer ~/.config/solana/id.json --owner <MINT_AUTHORITY>

ℹ️ ~/.config/solana/id.json assumes that you will use the keypair in the default location. To verify if this path applies to you, run solana config get and not the keypair path value.

ℹ️ You can get the <MINT_AUTHORITY> address from deployments/solana-testnet/OFT.json.

Set Message Execution Options

Refer to Generating Execution Options to learn how to build the options param for send transactions.

Note that you will need to either enable enforcedOptions in ./layerzero.config.ts or pass in a value for _options when calling send(). Having neither will cause a revert when calling send().

For this example, we have already included enforcedOptions by default in the layerzero.config.ts, which will take effect in the wiring step.

(Optional) If specifying the _options value when calling send()

It's only necessary to specify _options if you do not have enforcedOptions.

For Sepolia -> Solana, you should pass in the options value into the script at tasks/evm/send.ts as the value for sendParam.extraOptions.

For Solana -> Sepolia, you should pass in the options value into the script at tasks/solana/sendOFT.ts as the value for options for both in quote and send.

Send

Send From Solana Devnet -> To Ethereum Sepolia

npx hardhat lz:oft:send --src-eid 40168 --dst-eid 40161 --to <RECEIVER_BYTES20>  --amount <AMOUNT>

Send From Ethereum Sepolia -> To Solana Devnet

npx hardhat lz:oft:send --src-eid 40161 --dst-eid 40168 --to <RECEIVER_BASE58>  --amount <AMOUNT>

For more information, run:

npx hardhat lz:oft:send --help

Set a new Mint Authority Multisig

If you are not happy with the deployer being a mint authority, you can create and set a new mint authority by running:

pnpm hardhat lz:oft:solana:setauthority --eid <SOLANA_EID> --mint <TOKEN_MINT> --program-id <PROGRAM_ID> --escrow <ESCROW> --additional-minters <MINTERS_CSV>

The OFTStore is automatically added as a mint authority to the newly created mint authority, and does not need to be included in the --additional-minters list.

Appendix

Solana Program Verification

Refer to Verify the OFT Program.

Transferring ownership

Ownership of OFTs can be transferred via running the wire command after the appropriate changes are made to the LZ Config file (layerzero.config.ts). You need to first set the delegate value, and then only the owner value.

First, set the delegate.

How to set delegate: https://docs.layerzero.network/v2/developers/evm/create-lz-oapp/configuring-pathways#adding-delegate

Now run

npx hardhat lz:oapp:wire --oapp-config layerzero.config.ts

and execute the transactions.

Then, set the owner.

How to set owner: https://docs.layerzero.network/v2/developers/evm/create-lz-oapp/configuring-pathways#adding-owner

Now, run

npx hardhat lz:ownable:transfer-ownership --oapp-config layerzero.config.ts

Troubleshooting

Refer to the Solana Troubleshooting page on the LayerZero Docs to see how to solve common error when deploying Solana OFTs.