Starting with Deck A (4 descks supported), top/left:
DECKS
EFFECTS SECTION
-
FX PANEL -> NOT USED
-
FX KNOB 1 -> DRY/WET (FX Unit 1)
-
FX KNOB 2 -> PARAMETER 1 (FX Unit 1)
-
FX KNOB 3 -> PARAMETER 2 (FX Unit 1)
-
Release FX Encoder -> PARAMETER 3 (FX Unit 1)
-
FX Button 1 -> FX UNIT 1 ON/OFF
-
FX Button 2 -> Whatever selected effect provides
-
FX Button 3 -> Whatever selected effect provides
-
Left Beat -> Whatever selected effect provides
-
Right Beat -> NOT USED
- Effects Panel on Deck B/D is FX Unit 2.
- Browse Encoder Knob -> Works as expected (PUSH is unused at the moment)
- Load Button -> Loads track into corresponding deck (and unloads track in preview deck if there is one)
- Back Button -> Loads and starts selected track into preview deck (press again to unload) (Use the Cross Fader to seek through the preview track) - I have no other use for the X-Fader
- Shift Combo's NOT USED
-
(Shift) Slip Reverse -> NOT USED
-
Slip -> Toggle FLUX mode
-
Vinyl (shift Slip -> Toggle Vinyl Mode (Native function)
-
GRID Adjust -> Grid Adjust/Tap (if auto analyze gets the down beat wrong, you can correct it with this button - tap 4 beats starting with the downbeat as it should be to correct it)
-
SLIDE -> NOT USED
- Shift Combo's -> NOT USED
-
Deck Buttons -> Works as expected (Native function)
-
Jog -> Works as expected. Some latency, and the display doesn't work yet
-
Master Tempo -> Key Lock
-
Shift Master Temp -> Key Lock (Preserve Pitch)
-
Tempo Slider -> Works as expected, but up/down indicators don't work yet
-
Sync -> Works as expected
-
Shift Sync -> Works as expected
-
Quantize -> Toggle Quantize (Global)
-
Sequencer -> NOT USED
-
Cue/Play -> Works as expected
PERFORMANCE BUTTONS
- Hot Cue Button -> Select Hot Mode
- Shift Hot Cue Button -> Select Beat Jump Mode (Top Row: +4, +8, +16, +32 | Bottom Row: -32, -16, -8, -4)
- Hot Cue Buttons -> Set/Select Hot Cue
- Shift Hot Cue -> Delete Hot Cue
- Pad FX, Slicer, Sampler modes -> NOT USED
- Capture -> NOT USED
Loop Section:
-
Auto Beat Loop -> Set/enable Loop
-
Shift Auto Beat Loop -> Activate Auto Loop (will latch on to first loop cue point in track)
-
1/2x Button -> Loop/2
-
2x Button -> Loop*2 (shift combo's not yet implemented)
-
In/Out Button -> Start/End Loop Points
-
Parameter1 Buttons -> NOT USED
MIXER SECTION
- Mic Section -> Not touched, untested, no idea how this reacts now (might just work because native)
- Sampler Section -> Not touched, untested, no idea how this reacts now (might just work because native)
- Sound Color FX -> Can not use (native function, no MIDI signals)
- Headphone Section -> Works as expected
MIXER CHANNELS
- All functions work as expected, with the exception of the CUE buttons - pressing the CUE button will enable the FILTER knob. Use SHIFT CUE to enable pre-listen on headphone.
- Cross Fader is only used for seeking in the PREVIEW TRACK (see Browse/Load section) Note: when starting Traktor, the hardware faders will not force their position in Traktor. Touch them to do that (haven't found a way to force this yet).
Master/Booth Bnobs -> Work as expected (Native Function) Filter on Main -> Can not be used
OSC Sampler -> Works as expected (Native Function) (no idea yet how we can change the samples as in RB)
To IMPORT into Traktor:
Click Settings, Controller Manager, Add, Import TSI, Import Other, browse to file and load it. It should show as "DDJ-RZ - Generic MIDI", In-Port & Out-port: DDJ-RZ (DDJ-RZ), Device Target: Focus
ONLY tested on Mac. Traktor Version 2.11.1 (28)