These are the FluidNC configuration files I have in use on my machines. Both machines are using the Jackpot CNC Controller from V1 Engineering.
I have the Primo version of the MPCNC. This was upgraded from the Burly version which ran on a Rambo with LCD. As the Jackpot controller does not have a display option, I added the M5 FluidDial Pendant.
I am using the FluidDial Connection Starter Kit in this pendant. If you use this kit, make sure you are ordering/using the correct cable! You will need a 6P6C cable.
I recycled an old Folgertech 3D printer (built with 2020 extrusion) into a small laser engraver/cutter using a 10W diode I got from Amazon. I added an adjustable bed as the Z axis, and also built out a basic rotary axis that runs on the A axis. This machine does not have a pendant as it's normally being controlled from LightBurn.