Allows Home Assistant to interface thru Bluetooth with Prana Recuperators
This integration is not yet ready for use!
I belive strongly that this is because of my hardware. That means I am not able to make it work until in some day I change my HA hardware.
However it should install Prana device thru config flow withot any actual device data yet.
If you are able, you are free to fork it and make it to work yourself.
- Go to HACS
- Click the
⋮button in corner - Add this repository as a custom repository (
https://github.com/catdogmaus/Prana) - Select "Integration"
- Restart Home Assistant
This integration should be able to discover Prana devices and offer to add them as new devices, however because how HA Bluetooth works, this turned out to be very unreliable. You can still add new device using its mac address.
For you device mac addres go to Integrations click Bluetooth and then below Integration entries configure. There, under advertisement monitor you should see all BT devices and their addresses in HA Bluetooth range. When you cant see it there, you need to move you HA device close to Prana device or use Bluetooth proxy.
If you HA does not discover your device automatically, in Devices and Services clik Add Integration, search Prana and follow configuration flow.
When you are unable to add new device even with manual setup make sure that Prana is not connected to any other device (e.g. native Prana app). Also make sure your HA Bluetooth Connection slot allocations monitor is not full!