The Corne GLP (Gateron Low Profile) is a variant of the Corne keyboard, originally created by foostan. It supports Gateron low-profile key switches (KS-27 and KS-33). The original Corne firmware can be used with this keyboard.
| Name | Count | Remarks |
|---|---|---|
| PCB | 1 set | |
| Top plate | 2 sheets | 1.2mm thick |
| Bottom plate | 2 sheets | |
| OLED cover | 2 sheets | |
| Pro Micro or equivalent | 2 | |
| TRRS jack | 2 | |
| Reset switch | 2 | |
| Diodes | 42 | SMD Only (SOD-123 Package) |
| Gateron Low Profile Hotswap Sockets | 42 | |
| Key switches | 42 | Only compatible with Gateron KS-33 / KS-27 |
| Keycaps | 42 pieces | 1u 40 pcs, 1.5u 2 pcs Keycaps Comparison |
| Spacer M2 5mm | 10 pieces | For Case assembly |
| Spacer M2 9mm | 4 pieces | For OLED cover |
| Screw M2 4mm | 28 screws | |
| Rubber feet | 8 pieces | |
| TRRS (4 poles) cable | 1 | |
| Micro USB or USB-C cable | 1 | Avoid charge-only cables |
| Name | Count | Remarks |
|---|---|---|
| OLED module | 2 | |
| SK6812MINI-E | 42 | LEDs for Backlight |
| WS2812B | 12 | LEDs for Undergrow |
| Microcontroller/OLED Sockets | 1 | |
| Microcontroller Pins | 48 | Alternative: Diode/Resistor legs |
| OLED Headers | 1 | Soldered to OLED module |
It is compatible with Corne v3 top and bottom plates.
DIY kits / Prebuilt Keyboards are available at https://beekeeb.shop.