| Mira050 | Mira220 | Mira016 |
|---|---|---|
Welcome to the Mira project, an open-source camera board designed for Raspberry Pi or similar compute boards using the Mira image sensor family. This project aims to provide a high-quality, affordable, and accessible global shutter camera module. The boards are designed using Altium.
Mira is a family of Near IR enhanced global shutter image sensors ranging between 0.16MP and 2.2MP. The sensor has a small 2.79 µm pixel size with high sensitivity made possible by a state of the art BSI technology. The sensor has a MIPI CSI-2 interface to allow easy interfacing with a plethora of processors and FPGAs. Due to its small size, configurability and high sensitivity both in visual as well as NIR, the Mira is well suited for 2D and 3D applications, which include Active Stereo Vision, Structured Light Vision and AR/VR. High sensitivity in NIR enables increased measurement range and allows overall system power consumption optimization which is key for battery powered consumer and industrial applications.
- Mira image sensor
- On-chip oscillator, LDO, sequencero
- Accessible GPIO for trigger or illumination sync
- Open-source hardware and software*
- Compatible with any Raspberry Pi
- Also for sale via distributors
- Altium files available on request
- m12 lens
- lens holder
- screws: DIN 7981 - Form CH - Edelstahl Rostfrei A2 - 2,2 mm
- Camera Cable for Raspberry Pi
For questions, issues, or suggestions, please open an issue in the issue tracker.