WipperSnapper 1.0.0-beta.105
Installing WipperSnapper
Follow this learning system guide to learn how to install WipperSnapper on your board.
Upgrade a device running WipperSnapper
Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".
What's Changed
🆕 New Boards 🛹
Two new boards this release, the official Espressif 8MB flash no PSRAM ESP32-S3 devkit🛒, and the first new board not sold by Adafruit, the Seeed Studio XIAO ESP32-S3 (with optional camera daughter board for 2 extra pins). Tested with the Seeed XIAO Grove breakout with SSD1306 OLED I2C display built in, using the app.bin installed via esptool.
- Add Espressif ESP32-S3 DevkitC-1 N8 🛒 by @tyeth in #763
- Seeed Studio XIAO ESP32S3 by @tyeth in #764
To get started, just head to io.adafruit.com/devices/new.
🆕 New Components 🌱
See this Adafruit-Playground Note for the sensor pinout / cable details / hacky connector cutting instructions.
🌐 Recent Features 📺
We've just added support for I2C Display Components! Please see below for all the currently supported display components.
- 128x32 OLED featherwing using SSD1306 (Small & Large font versions)
- 128x64 OLED featherwing using SH1107 (Small & Large font versions)
- 64x32 OLED (Small & Large font versions)
- Monochrome 1.3" 128x64 OLED graphic display - STEMMA QT / Qwiic
- Monochrome 0.91" 128x32 I2C OLED Display - STEMMA QT / Qwiic
- Monochrome 0.96" 128x64 OLED Graphic Display - STEMMA QT PID: 326
- Quad Alphanumeric Display - Red 0.54" Digits w/ I2C Backpack - STEMMA QT / Qwiic
- Assembled Adafruit 0.56" 4-Digit 7-Segment Display - I2C Backpack - STEMMA QT
- i2c / SPI character LCD backpack - STEMMA QT / Qwiic
- Assembled Standard LCD 16x2
- RGB backlight negative LCD 16x2
- RGB backlight positive LCD 16x2
- Character LCDs, 20x4
Full Changelog: 1.0.0-beta.104...1.0.0-beta.105
