rp2040 adalogger factory test

.github/workflows/arduino_cron.yml

@@ -61,7 +61,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arduino-platform: ["cpb", "cpc", "cpx_ada", "esp32", "esp8266", "feather32u4", "feather_m0_express", "feather_m4_express", "feather_rp2040", "flora", "funhouse", "gemma", "gemma_m0", "hallowing_m0", "hallowing_m4_tinyusb", "ledglasses_nrf52840", "magtag", "metro_m0", "metro_m0_tinyusb", "metro_m4", "metro_m4_tinyusb", "monster_m4sk", "monster_m4sk_tinyusb", "neokeytrinkey_m0", "neotrellis_m4", "nrf52832", "nrf52840", "pixeltrinkey_m0", "protrinket_5v", "proxlighttrinkey_m0", "pybadge", "pycamera_s3",  "pygamer", "pyportal", "qualia_s3_rgb666", "qt2040_trinkey", "qtpy_m0", "qtpy_esp32s2", "rotarytrinkey_m0", "sht4xtrinkey_m0", "slidetrinkey_m0", "trinket_5v", "trinket_m0", "uno"]
+        arduino-platform: ["cpb", "cpc", "cpx_ada", "esp32", "esp8266", "feather32u4", "feather_m0_express", "feather_m4_express", "feather_rp2040", "feather_rp2040_adalogger", "flora", "funhouse", "gemma", "gemma_m0", "hallowing_m0", "hallowing_m4_tinyusb", "ledglasses_nrf52840", "magtag", "metro_m0", "metro_m0_tinyusb", "metro_m4", "metro_m4_tinyusb", "monster_m4sk", "monster_m4sk_tinyusb", "neokeytrinkey_m0", "neotrellis_m4", "nrf52832", "nrf52840", "pixeltrinkey_m0", "protrinket_5v", "proxlighttrinkey_m0", "pybadge", "pycamera_s3",  "pygamer", "pyportal", "qualia_s3_rgb666", "qt2040_trinkey", "qtpy_m0", "qtpy_esp32s2", "rotarytrinkey_m0", "sht4xtrinkey_m0", "slidetrinkey_m0", "trinket_5v", "trinket_m0", "uno"]
     runs-on: ubuntu-latest
     if: needs.check-if-needed.outputs.answer == 'true'
     needs: check-if-needed

Factory_Tests/Feather_RP2040_Adalogger/Feather_RP2040_Adalogger.ino

@@ -0,0 +1,66 @@
+// SPDX-FileCopyrightText: 2024 ladyada for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include <SdFat.h>
+#include <SPI.h>
+#include "Adafruit_TestBed.h"
+
+SdFat SD;
+SdFile file;
+SdSpiConfig config(PIN_SD_DAT3_CS, DEDICATED_SPI, SD_SCK_MHZ(16), &SPI1);
+
+extern Adafruit_TestBed TB;
+
+bool card_state = false;
+
+void setup() {
+  Serial.begin(115200);
+  //while (!Serial) { yield(); delay(10); }     // wait till serial port is opened
+  delay(100);  // RP2040 delay is not a bad idea
+
+  TB.neopixelPin = 17;
+  TB.neopixelNum = 1;
+  TB.begin();
+
+  pinMode(PIN_CARD_DETECT, INPUT_PULLUP);
+}
+
+uint8_t x = 0;
+void loop() {
+
+    TB.setColor(TB.Wheel(x++));
+    delay(10);
+
+    if (card_state && !digitalRead(PIN_CARD_DETECT)) {
+      Serial.println("Card removed");
+      card_state = digitalRead(PIN_CARD_DETECT);
+    }
+
+    if (!card_state && digitalRead(PIN_CARD_DETECT)) {
+      Serial.println("Card inserted");
+      card_state = digitalRead(PIN_CARD_DETECT);
+      delay(100);
+
+      if (!SD.begin(config)) {
+        Serial.println("SD card initialization failed!");
+        return;
+      }
+      Serial.println("SD card initialized OK!");
+
+      // Print the SD card details
+      uint32_t size = SD.card()->sectorCount();
+      if (size == 0) {
+        Serial.printf("Can't determine the card size.\n");
+        return;
+      }
+      uint32_t sizeMB = 0.000512 * size + 0.5;
+      Serial.printf("Card size: %lu MB (MB = 1,000,000 bytes)\n", sizeMB);
+      Serial.printf("\nVolume is FAT%d, Cluster size (bytes): %lu\n\n", int(SD.vol()->fatType()), SD.vol()->bytesPerCluster());
+
+      SD.ls(LS_R | LS_DATE | LS_SIZE);
+    }
+
+    return;
+
+}