This repository contains the Python driver to communicate with a Sensirion STCC4 sensor over I2C.
Click here to learn more about the Sensirion STCC4 sensor.
The default I²C address of STCC4 is 0x64.
Note
The SEK-STCC4 board from Sensirion includes a STCC4 and a SHT4x for temperature and humidity compensation, which is controlled by the STCC4 through the integrated I2C controller interface. The provided examples are designed considering this sensor configuration.
You can connect your sensor over a SEK-SensorBridge. For special setups you find the sensor pinout in the section below.
Sensor pinout
| Pin | Cable Color | Name | Description | Comments |
|---|---|---|---|---|
| 1 | black | GND | Ground | |
| 2 | red | VDD | Supply Voltage | 2.7V to 5.5V |
| 3 | green | SDA | I2C: Serial data input / output | |
| 4 | yellow | SCL | I2C: Serial clock input |
See the documentation page for an API description and a quickstart example.
The coding style can be checked with flake8:
pip install -e .[test] # Install requirements
flake8 # Run style checkIn addition, we check the formatting of files with
editorconfig-checker:
pip install editorconfig-checker==2.0.3 # Install requirements
editorconfig-checker # Run checkSee LICENSE.