WXDomoPy

The script downloads data from domoticz and prepares a complete weather frame, compliant with the APRS standard

Configuration

Configuration comes down to filling in the IP address of the domoticz from which data will be collected, and the IDX of individual sensors.

weather frame structure with position without time

   !               - required      identifier
   5215.01N        - required      latitude
   /               - required      symbol table
   02055.58E       - required      longtitude
   _               - required      icon (must be WX)
   ...             - required      wind direction (from 0-360) if no data set: "..."
   /               - required      separator
   ...             - required      wind speed (average last 1 minute) if no data set: "..."
   g...            - required      wind gust (max from last 5 mins) if no data set: "g..."
   t030            - required      temperature in fahrenheit
   r000            - option        rain xxx
   p000            - option        rain xxx
   P000            - option        rain xxx
   h00             - option        relative humidity (00 means 100%Rh)
   b10218          - option        atmosferic pressure in hPa multiple 10
   Fxxxx           - option        water level above or below flood stage see: http://aprs.org/aprs12/weather-new.txt
   V138            - option        battery volts in tenths   128 would mean 12.8 volts
   Xxxx            - option        radiation lvl

 temp z sieci APRSjest w fahrenheit przeliczanie na C =(F-32)/9*5
 temp w celsjusz do sieci APRS trzeba wyslac jako fahrenheit F = (C*9/5)+32

 WX possible icon:
 /_    - weather station wx blue
 /W    - national weather service
 /w    - water weather station
 \_    - weather station with digi green
 \W    - national weather services