Add Attiny417/817/1617/3217 support

Cargo.toml

@@ -71,10 +71,12 @@ attiny404 = ["device-selected"]
 attiny412 = ["device-selected"]
 attiny414 = ["device-selected"]
 attiny416 = ["device-selected"]
+attiny417 = ["device-selected"]
 attiny44a = ["device-selected"]
 attiny461a = ["device-selected"]
 attiny804 = ["device-selected"]
 attiny816 = ["device-selected"]
+attiny817 = ["device-selected"]
 attiny828 = ["device-selected"]
 attiny84 = ["device-selected"]
 attiny841 = ["device-selected"]
@@ -86,7 +88,9 @@ attiny88 = ["device-selected"]
 attiny1604 = ["device-selected"]
 attiny1606 = ["device-selected"]
 attiny1614 = ["device-selected"]
+attiny1617 = ["device-selected"]
 attiny1626 = ["device-selected"]
+attiny3217 = ["device-selected"]
 avr64du32 = ["device-selected"]
 avr64du28 = ["device-selected"]
 avr128db28 = ["device-selected"]

patch/attiny1617.yaml

@@ -0,0 +1,5 @@
+_svd: ../svd/attiny1617.svd
+
+_include:
+  - common/attiny-xmega/common.yaml
+  - common/attiny-xmega/1-series.yaml

patch/attiny3217.yaml

@@ -0,0 +1,5 @@
+_svd: ../svd/attiny3217.svd
+
+_include:
+  - common/attiny-xmega/common.yaml
+  - common/attiny-xmega/1-series.yaml

patch/attiny417.yaml

@@ -0,0 +1,5 @@
+_svd: ../svd/attiny417.svd
+
+_include:
+  - common/attiny-xmega/common.yaml
+  - common/attiny-xmega/1-series.yaml

patch/attiny817.yaml

@@ -0,0 +1,5 @@
+_svd: ../svd/attiny817.svd
+
+_include:
+  - common/attiny-xmega/common.yaml
+  - common/attiny-xmega/1-series.yaml

patch/common/attiny-xmega/0-series.yaml

@@ -1,4 +1,15 @@
 # Nothing needed beyond common config
 # This is probably good for at least ATtiny202/204/402/404/406, but may not be valid for ATtiny80* and ATtiny160*
 
-{}
+EVSYS:
+  # make ASYNCCHx, SYNCCHx, ASYNCUSERx and SYNCUSERx a rust slice
+  _modify:
+    "ASYNCUSER*":
+      description: "Users of asynchronous channels"
+    "SYNCUSER*":
+      description: "Users of synchronous channels"
+  _array:
+    "ASYNCCH*": {}
+    "SYNCCH*": {}
+    "ASYNCUSER*": {}
+    "SYNCUSER*": {}

patch/common/attiny-xmega/1-series.yaml

@@ -1,4 +1,22 @@
-# Nothing needed beyond common config
 # This is probably good for at least ATtiny212/214/412/414/416, but may not be valid for ATtiny81* and ATtiny161*
 
-{}
+TCD*:
+  EVCTRL?:
+    CFG:
+      _replace_enum:
+        NEITHER: [0, "Neither Filter nor Asynchronous Event is enabled"]
+        FILTERON: [1, "Input Capture Noise Cancellation Filter enabled"]
+        ASYNCON: [2, "Asynchronous Event output qualification enabled"]
+
+EVSYS:
+  # make ASYNCCHx, SYNCCHx, ASYNCUSERx and SYNCUSERx a rust slice
+  _modify:
+    "ASYNCUSER*":
+      description: "Users of asynchronous channels"
+    "SYNCUSER*":
+      description: "Users of synchronous channels"
+  _array:
+    "ASYNCCH*": {}
+    "SYNCCH*": {}
+    "ASYNCUSER*": {}
+    "SYNCUSER*": {}

patch/common/attiny-xmega/common.yaml

@@ -62,6 +62,17 @@ PORT[A-Z]:
     IN:
       name: INPUT
 
+  DIR:
+    "?~P*":
+      # Make all Pins use the same enum
+      _replace_enum:
+        Input: [0, "Input"]
+        Output: [1, "Output"]
+
+  # make PINxCTRL a rust slice
+  _array:
+    "PIN?CTRL": {}
+
 SPI*:
   CTRLA:
     PRESC:
@@ -74,3 +85,94 @@ SPI*:
           [2, "Peripheral clock / 64 if CLK2X == 0 else Peripheral clock / 32"]
         CLK_PER_128_64:
           [3, "Peripheral clock / 128 if CLK2X == 0 else Peripheral clock / 64"]
+
+    DORD:
+      # Make it an enum
+      _replace_enum:
+        MsbFirst: [0, "Most significant byte first"]
+        LsbFirst: [1, "Least significant byte first"]
+
+"USART*":
+  STATUS:
+    _modify:
+      # The RXSIF bit is actually writable to clear the flag
+      RXSIF:
+        access: read-write
+      # The WFB bit is write-only
+      WFB:
+        access: write-only
+
+CPUINT:
+  CTRLA:
+    IVSEL:
+      _replace_enum:
+        AFTERBOOT: [0, "Interrupt vectors are placed after the BOOT section of the Flash"]
+        INBOOT: [1, "Interrupt vectors are placed at the start of the BOOT section of the Flash"]
+    CVT:
+      _replace_enum:
+        NORMAL: [0, "Compact Vector Table function is disabled"]
+        COMPACT: [1, "Compact Vector Table function is enabled"]
+    LVL0RR:
+      _replace_enum:
+        FIXED: [0, "Priority is fixed for priority level 0 interrupt requests: The lowest interrupt vector address has the highest priority."]
+        ROUNDROBIN: [1, "The round robin priority scheme is enabled for priority level 0 interrupt requests"]
+
+CCL:
+  _cluster:
+    "LUT%s":
+      description: "CCL LUT configuration cluster"
+      "LUT?CTRLA": {}
+      "LUT?CTRLB": {}
+      "LUT?CTRLC": {}
+      "TRUTH?": {}
+
+  # turn all SEQCTRL-registers into slices
+  _array:
+    "SEQCTRL?": {}
+
+TCB*:
+  _add:
+    # FIXME: no idea how to add a write constraint with range [0x0, 0xFF] to
+    #        added registers to prevent bits() from being marked as unsafe
+    CCMPL:
+      description: Lower Compare or Capture in 8-bit PWM mode
+      addressOffset: 0x0C
+      access: read-write
+      size: 8
+    CCMPH:
+      description: Upper Compare or Capture in 8-bit PWM mode
+      addressOffset: 0x0D
+      access: read-write
+      size: 8
+
+CRCSCAN:
+  CTRLB:
+    SRC:
+      _replace_enum:
+        FLASH: [0, "CRC on entire flash"]
+        BOOTAPP: [1, "CRC on boot and appl section of flash"]
+        BOOT: [2, "CRC on boot section of flash"]
+    MODE:
+      _replace_enum:
+        PRIORITY: [0, "Priority to flash"]
+
+NVMCTRL:
+  CTRLA:
+    CMD:
+      _replace_enum:
+        NONE: [0, "No command"]
+        WP: [1, "Write page"]
+        ER: [2, "Erase page"]
+        ERWP: [3, "Erase and write page"]
+        PBC: [4, "Page buffer clear"]
+        CHER: [5, "Chip erase"]
+        EEER: [6, "EEPROM erase"]
+        WFU: [7, "Write fuse (PDI only)"]
+
+SLPCTRL:
+  CTRLA:
+    SMODE:
+      _replace_enum:
+        IDLE: [0, "Idle mode"]
+        STANDBY: [1, "Standby Mode"]
+        PDOWN: [2, "Power-down Mode"]

src/devices.rs

@@ -213,6 +213,18 @@ pub mod attiny1626 {
     include!(concat!(env!("OUT_DIR"), "/pac/attiny1626.rs"));
 }
 
+/// [ATtiny1617](https://www.microchip.com/wwwproducts/en/ATtiny1617)
+#[cfg(feature = "attiny1617")]
+pub mod attiny1617 {
+    include!(concat!(env!("OUT_DIR"), "/pac/attiny1617.rs"));
+}
+
+/// [ATtiny3217](https://www.microchip.com/wwwproducts/en/ATtiny3217)
+#[cfg(feature = "attiny3217")]
+pub mod attiny3217 {
+    include!(concat!(env!("OUT_DIR"), "/pac/attiny3217.rs"));
+}
+
 /// [ATtiny202](https://www.microchip.com/wwwproducts/en/ATtiny202)
 #[cfg(feature = "attiny202")]
 pub mod attiny202 {
@@ -291,6 +303,12 @@ pub mod attiny416 {
     include!(concat!(env!("OUT_DIR"), "/pac/attiny416.rs"));
 }
 
+/// [ATtiny417](https://www.microchip.com/wwwproducts/en/ATtiny417)
+#[cfg(feature = "attiny417")]
+pub mod attiny417 {
+    include!(concat!(env!("OUT_DIR"), "/pac/attiny417.rs"));
+}
+
 /// [ATtiny44a](https://www.microchip.com/en-us/product/ATtiny44a)
 #[cfg(feature = "attiny44a")]
 pub mod attiny44a {
@@ -315,6 +333,12 @@ pub mod attiny816 {
     include!(concat!(env!("OUT_DIR"), "/pac/attiny816.rs"));
 }
 
+/// [ATtiny817](https://www.microchip.com/wwwproducts/en/ATtiny817)
+#[cfg(feature = "attiny817")]
+pub mod attiny817 {
+    include!(concat!(env!("OUT_DIR"), "/pac/attiny817.rs"));
+}
+
 /// [ATtiny828](https://www.microchip.com/wwwproducts/en/ATtiny828)
 #[cfg(feature = "attiny828")]
 pub mod attiny828 {

src/lib.rs

@@ -33,7 +33,9 @@
 #![cfg_attr(feature = "attiny1604", doc = "**attiny1604**,")]
 #![cfg_attr(feature = "attiny1606", doc = "**attiny1606**,")]
 #![cfg_attr(feature = "attiny1614", doc = "**attiny1614**,")]
+#![cfg_attr(feature = "attiny1617", doc = "**attiny1617**,")]
 #![cfg_attr(feature = "attiny1626", doc = "**attiny1626**,")]
+#![cfg_attr(feature = "attiny3217", doc = "**attiny3217**,")]
 #![cfg_attr(feature = "attiny202", doc = "**attiny202**,")]
 #![cfg_attr(feature = "attiny204", doc = "**attiny204**,")]
 #![cfg_attr(feature = "attiny212", doc = "**attiny212**,")]
@@ -47,10 +49,12 @@
 #![cfg_attr(feature = "attiny412", doc = "**attiny412**,")]
 #![cfg_attr(feature = "attiny414", doc = "**attiny414**,")]
 #![cfg_attr(feature = "attiny416", doc = "**attiny416**,")]
+#![cfg_attr(feature = "attiny417", doc = "**attiny417**,")]
 #![cfg_attr(feature = "attiny44a", doc = "**attiny44a**,")]
 #![cfg_attr(feature = "attiny461a", doc = "**attiny461a**,")]
 #![cfg_attr(feature = "attiny804", doc = "**attiny804**,")]
 #![cfg_attr(feature = "attiny816", doc = "**attiny816**,")]
+#![cfg_attr(feature = "attiny817", doc = "**attiny817**,")]
 #![cfg_attr(feature = "attiny828", doc = "**attiny828**,")]
 #![cfg_attr(feature = "attiny84", doc = "**attiny84**,")]
 #![cfg_attr(feature = "attiny841", doc = "**attiny841**,")]
@@ -103,7 +107,9 @@
 //! `attiny167`,
 //! `attiny1604`,
 //! `attiny1614`,
+//! `attiny1617`,
 //! `attiny1626`,
+//! `attiny3217`,
 //! `attiny202`,
 //! `attiny204`,
 //! `attiny212`,
@@ -117,10 +123,12 @@
 //! `attiny412`,
 //! `attiny414`,
 //! `attiny416`,
+//! `attiny417`,
 //! `attiny44a`,
 //! `attiny461a`,
 //! `attiny804`,
 //! `attiny816`,
+//! `attiny817`,
 //! `attiny828`,
 //! `attiny84`,
 //! `attiny841`,
@@ -286,7 +294,9 @@ compile_error!(
     * attiny1604
     * attiny1606
     * attiny1614
+    * attiny1617
     * attiny1626
+    * attiny3217
     * attiny202
     * attiny204
     * attiny212
@@ -300,10 +310,12 @@ compile_error!(
     * attiny412
     * attiny414
     * attiny416
+    * attiny417
     * attiny44a
     * attiny461a
     * attiny804
     * attiny816
+    * attiny817
     * attiny828
     * attiny84
     * attiny841
@@ -389,8 +401,12 @@ pub use crate::devices::attiny1604;
 pub use crate::devices::attiny1606;
 #[cfg(feature = "attiny1614")]
 pub use crate::devices::attiny1614;
+#[cfg(feature = "attiny1617")]
+pub use crate::devices::attiny1617;
 #[cfg(feature = "attiny1626")]
 pub use crate::devices::attiny1626;
+#[cfg(feature = "attiny3217")]
+pub use crate::devices::attiny3217;
 #[cfg(feature = "attiny167")]
 pub use crate::devices::attiny167;
 #[cfg(feature = "attiny202")]
@@ -419,6 +435,8 @@ pub use crate::devices::attiny412;
 pub use crate::devices::attiny414;
 #[cfg(feature = "attiny416")]
 pub use crate::devices::attiny416;
+#[cfg(feature = "attiny417")]
+pub use crate::devices::attiny417;
 #[cfg(feature = "attiny44a")]
 pub use crate::devices::attiny44a;
 #[cfg(feature = "attiny461a")]
@@ -427,6 +445,8 @@ pub use crate::devices::attiny461a;
 pub use crate::devices::attiny804;
 #[cfg(feature = "attiny816")]
 pub use crate::devices::attiny816;
+#[cfg(feature = "attiny817")]
+pub use crate::devices::attiny817;
 #[cfg(feature = "attiny828")]
 pub use crate::devices::attiny828;
 #[cfg(feature = "attiny84")]