An initial Soapy driver and needs some further testing when the SDR is available. This is a port of the SoapyAirspy driver.
- SoapySDR - https://github.com/pothosware/SoapySDR/wiki
- libhydrasdr - https://github.com/hydrasdr/rfone_host
SoapySDRUtil --probe="driver=hydrasdr"
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
Probe device driver=hydrasdr
----------------------------------------------------
-- Device identification
----------------------------------------------------
driver=HydraSDR
hardware=HydraSDR
serial=36b463dc395884c7
----------------------------------------------------
-- Peripheral summary
----------------------------------------------------
Channels: 1 Rx, 0 Tx
Timestamps: NO
Other Settings:
* Bias tee - Enable the 4.5v DC Bias tee to power LNA / etc. via antenna connection.
[key=biastee, default=false, type=bool]
* Bit Pack - Enable packing 4 12-bit samples into 3 16-bit words for 25% less USB trafic.
[key=bitpack, default=false, type=bool]
----------------------------------------------------
-- RX Channel 0
----------------------------------------------------
Full-duplex: NO
Supports AGC: YES
Stream formats: CS16, CF32
Native format: CS16 [full-scale=32767]
Antennas: RX
Full gain range: [0, 45] dB
LNA gain range: [0, 15] dB
MIX gain range: [0, 15] dB
VGA gain range: [0, 15] dB
Full freq range: [24, 1800] MHz
RF freq range: [24, 1800] MHz
Sample rates: 10, 5, 2.5 MSps