Brick breaker clone on SSD1331 OLED- controlled over webpage
Connect the SSD1331 Display to the ESP
| Display | ESP8266 |
|---|---|
| SCL/SCKL | GPIO14 |
| SDA/MOSI | GPIO13 |
| RES/RST | GPIO15 |
| DC | GPIO5 |
| CS | GPIO4 |
| GND | GND/G |
| VCC | 3/3.3V |
| (the display i used isn't compatible with 5V!) |
Upload the sketch. Then connect to the ESPs wifi and open in the browser the adress/ip 2.2.2.2 - now you can control the game via the "buttons". If you've uncommented the AdviceOrientation part before uploding, you can also control via turning/tilting a mobile device(tested with firefox & chrome). thanks to Tobozo!