Rename ProjectionStyle -> AdjointStyle, _mul -> AdjointMul, and improve docs

docs/src/api.md

@@ -1,5 +1,7 @@
 # Public Interface
 
+## FFT and FFT planning functions
+
 ```@docs
 AbstractFFTs.fft
 AbstractFFTs.fft!
@@ -20,11 +22,26 @@ AbstractFFTs.plan_rfft
 AbstractFFTs.plan_brfft
 AbstractFFTs.plan_irfft
 AbstractFFTs.fftdims
-Base.adjoint
 AbstractFFTs.fftshift
 AbstractFFTs.fftshift!
 AbstractFFTs.ifftshift
 AbstractFFTs.ifftshift!
 AbstractFFTs.fftfreq
 AbstractFFTs.rfftfreq
+Base.size
+```
+
+## Adjoint functionality
+
+The following API is supported by plans that support adjoint functionality.
+It is also relevant to implementers of FFT plans that wish to support adjoints.
+```@docs
+Base.adjoint
+AbstractFFTs.AdjointStyle
+AbstractFFTs.output_size
+AbstractFFTs.adjoint_mul
+AbstractFFTs.FFTAdjointStyle
+AbstractFFTs.RFFTAdjointStyle
+AbstractFFTs.IRFFTAdjointStyle
+AbstractFFTs.UnitaryAdjointStyle
 ```

docs/src/implementations.md

@@ -32,10 +32,9 @@ To define a new FFT implementation in your own module, you should
 
 * You can also define similar methods of `plan_rfft` and `plan_brfft` for real-input FFTs.
 
-* To enable automatic computation of adjoint plans via [`Base.adjoint`](@ref) (used in rules for reverse-mode differentiation), define the trait `AbstractFFTs.ProjectionStyle(::MyPlan)`, which can return:
-    * `AbstractFFTs.NoProjectionStyle()`,
-    * `AbstractFFTs.RealProjectionStyle()`, for plans that halve one of the output's dimensions analogously to [`rfft`](@ref),
-    * `AbstractFFTs.RealInverseProjectionStyle(d::Int)`, for plans that expect an input with a halved dimension analogously to [`irfft`](@ref), where `d` is the original length of the dimension.
+* To support adjoints in a new plan, define the trait [`AbstractFFTs.AdjointStyle`](@ref).
+  `AbstractFFTs` implements the following adjoint styles: [`AbstractFFTs.FFTAdjointStyle`](@ref), [`AbstractFFTs.RFFTAdjointStyle`](@ref), [`AbstractFFTs.IRFFTAdjointStyle`](@ref), and [`AbstractFFTs.UnitaryAdjointStyle`](@ref).
+  To define a new adjoint style, define the methods [`AbstractFFTs.adjoint_mul`](@ref) and [`AbstractFFTs.output_size`](@ref).
 
 The normalization convention for your FFT should be that it computes ``y_k = \sum_j x_j \exp(-2\pi i j k/n)`` for a transform of
 length ``n``, and the "backwards" (unnormalized inverse) transform computes the same thing but with ``\exp(+2\pi i jk/n)``.

src/definitions.jl

@@ -583,17 +583,72 @@ plan_brfft
 
 ##############################################################################
 
-struct NoProjectionStyle end
-struct RealProjectionStyle end 
-struct RealInverseProjectionStyle 
+"""
+    AbstractFFTs.AdjointStyle(::Plan)
+
+Return the adjoint style of a plan, enabling automatic computation of adjoint plans via
+[`Base.adjoint`](@ref). Instructions for supporting adjoint styles are provided in the
+[implementation instructions](implementations.md#Defining-a-new-implementation).
+"""
+abstract type AdjointStyle end
+
+"""
+    FFTAdjointStyle()
+
+Adjoint style for complex to complex discrete Fourier transforms that normalize
+the output analogously to [`fft`](@ref).
+
+Since the Fourier transform is unitary up to a scaling, the adjoint simply applies 
+the transform's inverse with an appropriate scaling.
+"""
+struct FFTAdjointStyle <: AdjointStyle end
+
+"""
+    RFFTAdjointStyle()
+
+Adjoint style for real to complex discrete Fourier transforms that halve one of
+the output's dimensions and normalize the output analogously to [`rfft`](@ref).
+
+Since the Fourier transform is unitary up to a scaling, the adjoint applies the transform's 
+inverse, but with appropriate scaling and additional logic to handle the fact that the
+output is projected to exploit its conjugate symmetry (see [`rfft`](@ref)).
+"""
+struct RFFTAdjointStyle <: AdjointStyle end 
+
+"""
+    IRFFTAdjointStyle(d::Dim)
+
+Adjoint style for complex to real discrete Fourier transforms that expect an input
+with a halved dimension and normalize the output analogously to [`irfft`](@ref),
+where `d` is the original length of the dimension.
+
+Since the Fourier transform is unitary up to a scaling, the adjoint applies the transform's 
+inverse, but with appropriate scaling and additional logic to handle the fact that the
+input is projected to exploit its conjugate symmetry (see [`irfft`](@ref)). 
+"""
+struct IRFFTAdjointStyle <: AdjointStyle
     dim::Int
 end
-const ProjectionStyle = Union{NoProjectionStyle, RealProjectionStyle, RealInverseProjectionStyle}
 
-output_size(p::Plan) = _output_size(p, ProjectionStyle(p))
-_output_size(p::Plan, ::NoProjectionStyle) = size(p)
-_output_size(p::Plan, ::RealProjectionStyle) = rfft_output_size(size(p), fftdims(p))
-_output_size(p::Plan, s::RealInverseProjectionStyle) = brfft_output_size(size(p), s.dim, fftdims(p))
+"""
+    UnitaryAdjointStyle()
+
+Adjoint style for unitary transforms, whose adjoint equals their inverse.
+"""
+struct UnitaryAdjointStyle <: AdjointStyle end
+
+"""
+    output_size(p::Plan)
+
+Return the size of the output of a plan `p`.
+
+Implementations of a new adjoint style `AS <: AbstractFFTs.AdjointStyle` should define `output_size(::Plan, ::AS)`.
+"""
+output_size(p::Plan) = output_size(p, AdjointStyle(p))
+output_size(p::Plan, ::FFTAdjointStyle) = size(p)
+output_size(p::Plan, ::RFFTAdjointStyle) = rfft_output_size(size(p), fftdims(p))
+output_size(p::Plan, s::IRFFTAdjointStyle) = brfft_output_size(size(p), s.dim, fftdims(p))
+output_size(p::Plan, ::UnitaryAdjointStyle) = size(p)
 
 struct AdjointPlan{T,P<:Plan} <: Plan{T}
     p::P
@@ -604,9 +659,7 @@ end
     (p::Plan)'
     adjoint(p::Plan)
 
-Form the adjoint operator of an FFT plan. Returns a plan that performs the adjoint operation of
-the original plan. Note that this differs from the corresponding backwards plan in the case of real
-FFTs due to the halving of one of the dimensions of the FFT output, as described in [`rfft`](@ref).
+Return a plan that performs the adjoint operation of the original plan.
 
 !!! note
     Adjoint plans do not currently support `LinearAlgebra.mul!`. Further, as a new addition to `AbstractFFTs`, 
@@ -617,43 +670,60 @@ Base.adjoint(p::AdjointPlan) = p.p
 # always have AdjointPlan inside ScaledPlan.
 Base.adjoint(p::ScaledPlan) = ScaledPlan(p.p', p.scale)
 
+"""
+    size(p::Plan)
+
+Return the size of the input of a plan `p`.
+"""
 size(p::AdjointPlan) = output_size(p.p)
 output_size(p::AdjointPlan) = size(p.p)
 
-Base.:*(p::AdjointPlan, x::AbstractArray) = _mul(p, x, ProjectionStyle(p.p))
+Base.:*(p::AdjointPlan, x::AbstractArray) = adjoint_mul(p.p, x)
+
+"""
+    adjoint_mul(p::Plan, x::AbstractArray)
+
+Multiply an array `x` by the adjoint of a plan `p`. This is equivalent to `p' * x`.
+
+Implementations of a new adjoint style `AS <: AbstractFFTs.AdjointStyle` should define
+`adjoint_mul(::Plan, ::AbstractArray, ::AS)`.
+"""
+adjoint_mul(p::Plan, x::AbstractArray) = adjoint_mul(p, x, AdjointStyle(p))
 
-function _mul(p::AdjointPlan{T}, x::AbstractArray, ::NoProjectionStyle) where {T}
-    dims = fftdims(p.p)
-    N = normalization(T, size(p.p), dims)
-    return (p.p \ x) / N
+function adjoint_mul(p::Plan{T}, x::AbstractArray, ::FFTAdjointStyle) where {T}
+    dims = fftdims(p)
+    N = normalization(T, size(p), dims)
+    return (p \ x) / N
 end
 
-function _mul(p::AdjointPlan{T}, x::AbstractArray, ::RealProjectionStyle) where {T<:Real}
-    dims = fftdims(p.p)
-    N = normalization(T, size(p.p), dims)
+function adjoint_mul(p::Plan{T}, x::AbstractArray, ::RFFTAdjointStyle) where {T<:Real}
+    dims = fftdims(p)
+    N = normalization(T, size(p), dims)
     halfdim = first(dims)
-    d = size(p.p, halfdim)
-    n = output_size(p.p, halfdim)
+    d = size(p, halfdim)
+    n = output_size(p, halfdim)
     scale = reshape(
         [(i == 1 || (i == n && 2 * (i - 1)) == d) ? N : 2 * N for i in 1:n],
         ntuple(i -> i == halfdim ? n : 1, Val(ndims(x)))
     )
-    return p.p \ (x ./ convert(typeof(x), scale))
+    return p \ (x ./ convert(typeof(x), scale))
 end
 
-function _mul(p::AdjointPlan{T}, x::AbstractArray, ::RealInverseProjectionStyle) where {T}
-    dims = fftdims(p.p)
-    N = normalization(real(T), output_size(p.p), dims)
+function adjoint_mul(p::Plan{T}, x::AbstractArray, ::IRFFTAdjointStyle) where {T}
+    dims = fftdims(p)
+    N = normalization(real(T), output_size(p), dims)
     halfdim = first(dims)
-    n = size(p.p, halfdim)
-    d = output_size(p.p, halfdim)
+    n = size(p, halfdim)
+    d = output_size(p, halfdim)
     scale = reshape(
         [(i == 1 || (i == n && 2 * (i - 1)) == d) ? 1 : 2 for i in 1:n],
         ntuple(i -> i == halfdim ? n : 1, Val(ndims(x)))
     )
-    return (convert(typeof(x), scale) ./ N) .* (p.p \ x)
+    return (convert(typeof(x), scale) ./ N) .* (p \ x)
 end
 
+adjoint_mul(p::Plan, x::AbstractArray, ::UnitaryAdjointStyle) = p \ x
+
 # Analogously to ScaledPlan, define both plan_inv (for no caching) and inv (caches inner plan only).
 plan_inv(p::AdjointPlan) = adjoint(plan_inv(p.p)) 
 inv(p::AdjointPlan) = adjoint(inv(p.p))

test/testplans.jl

@@ -21,8 +21,8 @@ Base.ndims(::TestPlan{T,N}) where {T,N} = N
 Base.size(p::InverseTestPlan) = p.sz
 Base.ndims(::InverseTestPlan{T,N}) where {T,N} = N
 
-AbstractFFTs.ProjectionStyle(::TestPlan) = AbstractFFTs.NoProjectionStyle()
-AbstractFFTs.ProjectionStyle(::InverseTestPlan) = AbstractFFTs.NoProjectionStyle()
+AbstractFFTs.AdjointStyle(::TestPlan) = AbstractFFTs.FFTAdjointStyle()
+AbstractFFTs.AdjointStyle(::InverseTestPlan) = AbstractFFTs.FFTAdjointStyle()
 
 function AbstractFFTs.plan_fft(x::AbstractArray{T}, region; kwargs...) where {T}
     return TestPlan{T}(region, size(x))
@@ -110,8 +110,8 @@ mutable struct InverseTestRPlan{T,N,G} <: Plan{Complex{T}}
     end
 end
 
-AbstractFFTs.ProjectionStyle(::TestRPlan) = AbstractFFTs.RealProjectionStyle()
-AbstractFFTs.ProjectionStyle(p::InverseTestRPlan) = AbstractFFTs.RealInverseProjectionStyle(p.d)
+AbstractFFTs.AdjointStyle(::TestRPlan) = AbstractFFTs.RFFTAdjointStyle()
+AbstractFFTs.AdjointStyle(p::InverseTestRPlan) = AbstractFFTs.IRFFTAdjointStyle(p.d)
 
 function AbstractFFTs.plan_rfft(x::AbstractArray{T}, region; kwargs...) where {T<:Real}
     return TestRPlan{T}(region, size(x))
@@ -241,7 +241,7 @@ end
 
 Base.size(p::InplaceTestPlan) = size(p.plan)
 Base.ndims(p::InplaceTestPlan) = ndims(p.plan)
-AbstractFFTs.ProjectionStyle(p::InplaceTestPlan) = AbstractFFTs.ProjectionStyle(p.plan)
+AbstractFFTs.AdjointStyle(p::InplaceTestPlan) = AbstractFFTs.AdjointStyle(p.plan)
 
 function AbstractFFTs.plan_fft!(x::AbstractArray, region; kwargs...)
     return InplaceTestPlan(plan_fft(x, region; kwargs...))