Pure Simple UI Configurator for SlimeVR Smol Slimes (Unofficial)
- Easy UI
- Configure the trackers via simple buttons
- Tooltips explaining breafly what each button does
- Auto Firmware updater, Only required to plug your tracker in via USB
- Firmware list fetches latest daily builds
- Linux and Windows (Untested Mac) support.
There are 2 options to run the Configurator:
- Single file executable from Releases (Windows + Linux + macOS)
- Python file from the uploaded files above.
Note: There is a Video explaining usage.
- Plug in the tracker or reciever, hold one side of a wire on rst pin
(4th pin down from where B+ pin is)
and doubble tap gnd (usbc connector on the Nice!Nano)
- Press "↻" refresh, then select the port from the dropdown menu on the left of the refresh button, then press "Connect"
- Select the version of hardware from the dropdown menu called "Select Firmware", press "⬇ Firmware", Wait ~20 seconds, the tracker will flash.
- Plug in your Reciever, press "↻" refresh and select the port And then press "Connect"
- To Configure your reciever, select the reciever tab, press pairing mode and power on each reciever one by one, you should notice
the trackers being added, once all the trackers have been paired, press "Exit Pairing Mode"
- Plug in a tracker, Press "↻" refresh, select the COM port & "Connect", press "Calibrate 6 Sides", do what the terminal says.
- Then press "Calibrate", leave the tracker on a desk for 5~ seconds and done!
Note: You can also doubble tap the trackers button instead of pressing "Calibrate"
- Connect to the port, select the firmware, press "⬇ Firmware" and wait ~20 seconds.
Note: Trackers and recievers need to be all updated on the same version or they wont want to pair
Official SmolSlime docs Here
If you want to feel safe running this program, read the Python code and run it from the .py
If a tracker has old pair data it wont connect to your reciever, plug your tracker in and "Clear Con. data"