This respository contains files to recreate the MEWron printers present at LIMS1@EPFL. We do our best to keep an eye on this but refer for questions to the authors of the corresponsing publications. The MEWron is based on the following publication:
MEWron: An open-source melt electrowriting platform
https://doi.org/10.1016/j.addma.2023.103604
Ander Reizabal, Taavet Kangur, Paula G. Saiz, Sönke Menke, Christophe Moser, Jürgen Brugger, Paul D. Dalton, Simon Luposchainsky
Additive Manufacturing, Volume 71, 2023, 103604, ISSN 2214-860.
More information on our work and current developments can be found here: https://go.epfl.ch/mew
If you use the files in this repository for scientific work, we kindly ask you to cite this respository and any publications listed here:
- "MEWron: An open-source melt electrowriting platform" https://doi.org/10.1016/j.addma.2023.103604
- "Performance Comparison of Shape Memory Polymer Structures Printed by Fused Deposition Modeling and Melt Electrowriting" https://doi.org/10.1002/admt.202400466
Here you can find all information on how to build and set-up your own MEWron with a flat collector. You can also find and image file that you can flash onto a new SD card to see how we set up the printer.
Here you can find all information on how to upgrade your existing flat collector MEWron with a tubular collector. You can also find and image file that you can flash onto a new SD card to see how we set up the printer.
Here you can find phython scripts to generate your own G-codes as well as some premade ones.