Connector for the MLM2PRO to connect to GSPro via direct bluetooth connection. This is in beta to say the least.. there will be bugs and crashes.
please open an issue if crash
If you like my work and want to support me, you can donate to me via ko-fi. I would be very grateful for your support.
The main requirement is that you have a Rapsodo subscription for third party apps, no other subscriptions are necessary.
Open Rapsodo MLM2PRO app, go to play, select third party, and authorize Awesome golf. This does not require a Awesome Golf subscription.
Pair your device with windows: MLM2-SerialNumber OR BlueZ not MLM2_BT_, you may need to turn on advanced bluetooth discovery to see the device on the list.
Pairing is only required the first time.
The app should handle everything, it should connect,and the main window should show "CONNECTED" as the launch monitor status
Once you load into a round, the device should turn green automatically and be ready to read hits.
When you leave a round it will turn blue again until you start a new round.
Selected club in GSPro does nothing for the app outside of labeling the club in the Shot Data section, and discovering when you are putting to enable the putting cam ( if enabled ).
On first load of the application a settings.json file is created in the same directory as the executable, it will prompt for the Web Api secret if it is not set.
The only setting that is required to communicate with the device is the web api secret.
Config file was overhauled after a few updates. if you have been keeping a config file. i suggest you open the app and let it build a new config file. then compare your old settings ( or go to settings in the app and set your desired settings ).
It should be self explanatory however each text box below their respective labels are for status updates of that item.
next to GSPro after a communication has gone back and forth it will show the selected club, this is purely for knowing when to enable or disable putting. or if you want to track stats on a particular club batch, however GSPro may show the data better.
Next to launch monitor you will see a number when connected. This is the device battery life.
Shot Data shows the list of shots and the "Result" shows if GSPro successfully accept the data transmission.
- Open this connector
- Go to Settings and Enabled API Relay under GSPro settings
- Close and reopen this connector
- Open the other connector
- Go to settings and set GSPro port to 951 or the port you set in the settings of this connector if you changed it
- hit connect on other connector. some connectors require the GSPro API window to be open. so make sure its open when testing.
- Unpairing with windows is not necessary for troubleshooting.
- The Warning for the third party token expiring is based on what is stored on the device
When you authorize awesome golf in the mlm2pro app
- It does not necessarily write a new token to the device. it only does that if its close to or expired.
Getting a connection can sometimes be unstable, easiest method is to turn device on, wait for it to be solid red. then open the app.
If the third party app token expires ( The Authorization for awesome golf in the mlm2pro app )
- The device may just stay red and reject any connections
- you will need to reauthorize awesome golf in the mlm2pro app
Common ways to get the first connection working:
- close app
- unpair
- toggle off and back on Bluetooth
- pair the device and make sure to choose mlm2-serialnumber ( not MLM2_BT_ , however BlueZ is okay )
- windows shows connected. just wait for it to flip to not connected
- Open app and let it attempt to connect
Putting cam location
- if you need the putting cam to open and close in the same position each time
- get on a green so the putting cam is triggered
- place the cam window where you want it to be
- hit Q in the putting cam window so it closes
- it should auto re-open and remember the position for the future
if you get it all connected and all seems well, and you have a green light, but you do not get shot data. press the Resub button. when the light is green avoid the other buttons as it may break the connection with the device. and if that happens you need to close the app, power cycle the device, and reopen the app when the device is solid red again.
I just want to say thank you to the many projects that came before mine where i am using, have used as inspiration, used code, or even just design ideas.
