chamber-control-for-klipper

Installation

cd ~
git clone https://github.com/Stephan3/chamber-control-for-klipper.git
ln -s ~/chamber-control-for-klipper/chamber.py ~/klipper/klippy/extras/chamber.py

example config:

[chamber]
#	heating(chamberheater) or cooling (fan)
control_mode: cooling
sensor_type: NTC 100K beta 3950
sensor_pin: z:P0.23
pin: z:P2.4
max_temp: 80
min_temp: 10

#   optional - pwm fan power
#min_speed = 0
#max_speed = 1

#   optional - only for watermark
#max_delta: 2

#   optional - control pid or watermark (BangBang), default: watermark
#control: pid
#pid_Kp: 2
#pid_Ki: 5
#pid_Kd: 1