Omron_MoMa_ROS2

Original packages are from OmronAPAC

This repository allows controlling a Omron MoMa (Omron Mobile Manipulator) using packages that bridges,

• Omron_AMR_ROS2 package
• Omron_TM_ROS2 package
• tmr_ros2 package

For supported features and limitations, see the individual repositories on the features supported by the MoMa.

Setup

Create a workspace

mkdir -p omron_ws/src
cd omron_ws/src

Install dependencies

sudo apt install ros-humble-moveit ros-humble-controller-manager ros-humble-joint-trajectory-controller ros-humble-joint-state-broadcaster ros-humble-rmw-cyclonedds-cpp ros-humble-joint-state-publisher ros-humble-joint-state-publisher-gui ros-humble-vision-opencv

Clone the repositories into the src folder by

git clone https://github.com/CollaborativeRoboticsLab/Omron_MoMa_ROS2.git
git clone https://github.com/CollaborativeRoboticsLab/Omron_AMR_ROS2.git
git clone https://github.com/CollaborativeRoboticsLab/Omron_TM_ROS2.git
git clone https://github.com/CollaborativeRoboticsLab/Omron_TM_CORE_ROS2.git -b humble

finally buildby

cd ..
colcon build

Docker

Clone this reposiotory

git clone https://github.com/CollaborativeRoboticsLab/Omron_MoMa_ROS2.git 
cd Omron_MoMa_ROS2/docker

Pull the Docker image and start compose (No need to run docker compose build)

docker compose pull
docker compose up

To clean the system,

docker compose down

Usage

TM Robot with TMFlow

1. Startup TMFLow software with a listener node

2. Establish Remote connection to TM Robot

3. Start TM Driver

source install/setup.bash
ros2 run tm_driver tm_driver robot_ip:=<robot_ip_address>

TM Robot Arm with Moveit

TM driver node is included in the tm12x_run_move_group.launch.py file.

source install/setup.bash
ros2 launch tm12x_moveit_config tm12x_run_move_group.launch.py robot_ip:=<robot_ip_address>

TM Robot Arm with Moveit (Simulation)

TM driver node is included in the tm12x_run_move_group.launch.py file.

source install/setup.bash
ros2 launch tm12x_moveit_config tm12x_run_move_group.launch.py

Usage with docker

TM Robot with TMFlow

1. Startup TMFLow software with a listener node

2. Establish Remote connection to TM Robot

3. Start TM Driver by uncommenting the following line under command on the docker compose.yaml file and then running docker compose up

command:
  - ros2 run tm_driver tm_driver robot_ip:=<robot_ip_address>

TM Robot Arm with Moveit

1. TM driver node is included in the tm12x_run_move_group.launch.py file. To start the headless moveit server, uncomment the following line on the companion computer

   command:
   - ros2 launch tm12x_moveit_config tm12x_run_move_group_headless.launch.py robot_ip:=<robot_ip_address>

   and run

   docker compose up

2. On the remote computer run the following command,

   source install/setup.bash
   ros2 launch tm12x_moveit_config tm12x_run_move_group_visualize.launch.py