command exited with status 63: nrfjprog --ids

[Masterpc96]

I have installed west and I have build an example project everything went ok but when I want to flash connected nrf52840 dk board I got this error
west flash -- west flash: rebuilding [0/5] Performing build step for 'mcuboot_subimage' ninja: no work to do. [2/2] cd /Users/michaelurban/smarthome/ncs/v1.7.0-rc1/homekit/ownProjects/led...elurban/smarthome/ncs/v1.7.0-rc1/modules/lib/openthread/etc/cmake/print.cmak OPENTHREAD_CONFIG_ASSERT_ENABLE=0 OPENTHREAD_CONFIG_BACKBONE_ROUTER_DUA_NDPROXYING_ENABLE=0 OPENTHREAD_CONFIG_BACKBONE_ROUTER_MULTICAST_ROUTING_ENABLE=0 OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS=0 OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS_MANAGEMENT=0 OPENTHREAD_CONFIG_CHILD_SUPERVISION_ENABLE=1 OPENTHREAD_CONFIG_COAP_API_ENABLE=1 OPENTHREAD_CONFIG_COAP_SECURE_API_ENABLE=1 OPENTHREAD_CONFIG_MAC_CSL_AUTO_SYNC_ENABLE=0 OPENTHREAD_CONFIG_DHCP6_CLIENT_ENABLE=1 OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE=1 OPENTHREAD_CONFIG_ECDSA_ENABLE=1 OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE=1 OPENTHREAD_CONFIG_IP6_FRAGMENTATION_ENABLE=1 OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE=1 OPENTHREAD_CONFIG_JOINER_ENABLE=1 OPENTHREAD_CONFIG_MAC_FILTER_ENABLE=1 OPENTHREAD_CONFIG_TMF_NETWORK_DIAG_MTD_ENABLE=1 OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE=1 OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE=1 OPENTHREAD_CONFIG_SNTP_CLIENT_ENABLE=1 OPENTHREAD_CONFIG_UDP_FORWARD_ENABLE=1 OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT=0 PACKAGE_NAME=OPENTHREAD OPENTHREAD_CONFIG_THREAD_VERSION=OT_THREAD_VERSION_1_1 OPENTHREAD_CONFIG_NCP_HDLC_ENABLE=1 OPENTHREAD_CONFIG_TCP_ENABLE=0 KERNEL __ZEPHYR__=1 _FORTIFY_SOURCE=2 BUILD_VERSION=v2.6.99-ncs1-rc1 __LINUX_ERRNO_EXTENSIONS__ USE_PARTITION_MANAGER=1 __PROGRAM_START NRF52840_XXAA HAVE_BLE=1 HAP_FEATURE_BLE=1 HAVE_THREAD=1 HAP_FEATURE_THREAD=1 THREAD_DEVKIT THREAD_DEVKIT_ADK HAVE_MFI_HW_AUTH=0 HAP_FEATURE_MFI_HW_AUTH=0 HAVE_NFC=0 HAP_FEATURE_NFC=0 HAVE_DISPLAY=0 HAVE_ACCESSORY_REACHABILITY=1 HAP_LOG_LEVEL=0 HAP_LOG_SENSITIVE=0 HAP_DISABLE_ASSERTS=1 HAP_DISABLE_PRECONDITIONS=1 HAVE_CUSTOM_SINGLE_SHOT_CHACHA20_POLY1305 HAP_COMPILER_VERSION=__VERSION__ HAP_BUILD=fa51b06d HAP_VERSION=5.3 NRF_802154_ENCRYPTION_ENABLED=0 NRF_802154_SECURITY_WRITER_ENABLED=0 NRF_802154_IE_WRITER_ENABLED=0 NRF_802154_USE_RAW_API=1 NRF_802154_PENDING_SHORT_ADDRESSES=16 NRF_802154_PENDING_EXTENDED_ADDRESSES=16 NRF_802154_RX_BUFFERS=16 NRF_802154_CCA_CORR_LIMIT_DEFAULT=2 NRF_802154_CCA_CORR_THRESHOLD_DEFAULT=45 NRF_802154_CCA_ED_THRESHOLD_DEFAULT=45 NRF_802154_CSMA_CA_ENABLED=1 NRF_802154_TX_STARTED_NOTIFY_ENABLED=1 NRF_802154_ACK_TIMEOUT_ENABLED=1 NRF_802154_ENCRYPTION_ENABLED=0 NRF_802154_SECURITY_WRITER_ENABLED=0 NRF_802154_IE_WRITER_ENABLED=0 NRF_802154_CCA_MODE_DEFAULT=NRF_RADIO_CCA_MODE_ED NRF_802154_INTERNAL_RADIO_IRQ_HANDLING=0 PSA_CRYPTO_SECURE MBEDTLS_CONFIG_FILE=nrf-config.h -- west flash: using runner nrfjprog ERROR: An internal error has occurred, please try again. NOTE: For additional output, try running again with logging enabled (--log). NOTE: Any generated log error messages will be displayed. FATAL ERROR: command exited with status 63: nrfjprog --ids