drivers: pinctrl: enable the AFIO clock on the CH32V003/20x/30x

The Alternate Function IO (AFIO) block must have the clock enabled
before configuring. Some remappings seem to work without, but some
like EXTI do not. Fix.

Signed-off-by: Michael Hope <michaelh@juju.nz>

Author: nzmichaelh

drivers/pinctrl/pinctrl_wch_20x_30x_afio.c

@@ -4,6 +4,9 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
+#define DT_DRV_COMPAT wch_20x_30x_afio
+
+#include <zephyr/drivers/clock_control.h>
 #include <zephyr/drivers/pinctrl.h>
 #include <zephyr/dt-bindings/pinctrl/ch32v20x_30x-pinctrl.h>
 
@@ -87,3 +90,13 @@ int pinctrl_configure_pins(const pinctrl_soc_pin_t *pins, uint8_t pin_cnt, uintp
 
 	return 0;
 }
+
+static int pinctrl_clock_init(void)
+{
+	const struct device *clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(0));
+	uint8_t clock_id = DT_INST_CLOCKS_CELL(0, id);
+
+	return clock_control_on(clock_dev, (clock_control_subsys_t *)(uintptr_t)clock_id);
+}
+
+SYS_INIT(pinctrl_clock_init, PRE_KERNEL_1, 0);

drivers/pinctrl/pinctrl_wch_afio.c

@@ -4,6 +4,9 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
+#define DT_DRV_COMPAT wch_afio
+
+#include <zephyr/drivers/clock_control.h>
 #include <zephyr/drivers/pinctrl.h>
 #include <zephyr/dt-bindings/pinctrl/ch32v003-pinctrl.h>
 
@@ -77,3 +80,13 @@ int pinctrl_configure_pins(const pinctrl_soc_pin_t *pins, uint8_t pin_cnt, uintp
 
 	return 0;
 }
+
+static int pinctrl_clock_init(void)
+{
+	const struct device *clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(0));
+	uint8_t clock_id = DT_INST_CLOCKS_CELL(0, id);
+
+	return clock_control_on(clock_dev, (clock_control_subsys_t *)(uintptr_t)clock_id);
+}
+
+SYS_INIT(pinctrl_clock_init, PRE_KERNEL_1, 0);

dts/riscv/wch/ch32v0/ch32v003.dtsi

@@ -77,6 +77,7 @@
 			reg = <0x40010000 0x10>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			clocks = <&rcc CH32V00X_CLOCK_AFIO>;
 			status = "okay";
 
 			gpioa: gpio@40010800 {

dts/riscv/wch/ch32v208/ch32v208.dtsi

@@ -76,6 +76,7 @@
 			reg = <0x40010000 16>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			clocks = <&rcc CH32V20X_V30X_CLOCK_AFIO>;
 
 			gpioa: gpio@40010800 {
 				compatible = "wch,gpio";