modules: hal_nxp: Move hal_nxp glue layer to zephyr repo

Move hal_nxp glue layer to zephyr repo.
Fix build warnings and failures caused by hal_nxp upgrade.
Update manifest to contain hal_nxp changes.

Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>

Author: ZhaoxiangJin

MAINTAINERS.yml

@@ -5006,9 +5006,6 @@ West:
     - bperseghetti
   files:
     - modules/hal_nxp/
-    - modules/Kconfig.imx
-    - modules/Kconfig.mcux
-    - modules/Kconfig.nxp_s32
   labels:
     - "platform: NXP"
 

boards/nxp/mimxrt1010_evk/CMakeLists.txt

@@ -20,7 +20,7 @@ if(CONFIG_NXP_IMXRT_BOOT_HEADER)
     zephyr_compile_definitions(XIP_BOOT_HEADER_ENABLE=1)
     zephyr_compile_definitions(BOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024)
     set(RT1010_BOARD_DIR
-      "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk/boards/evkmimxrt1010")
+      "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk-ng/boards/evkmimxrt1010")
     zephyr_library_sources(${RT1010_BOARD_DIR}/xip/evkmimxrt1010_flexspi_nor_config.c)
     zephyr_library_include_directories(${RT1010_BOARD_DIR}/xip)
   endif()

boards/nxp/mimxrt1015_evk/CMakeLists.txt

@@ -19,7 +19,7 @@ if(CONFIG_NXP_IMXRT_BOOT_HEADER)
     zephyr_compile_definitions(XIP_BOOT_HEADER_ENABLE=1)
     zephyr_compile_definitions(BOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024)
     set(RT1015_BOARD_DIR
-      "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk/boards/evkmimxrt1015")
+      "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk-ng/boards/evkmimxrt1015")
     zephyr_library_sources(${RT1015_BOARD_DIR}/xip/evkmimxrt1015_flexspi_nor_config.c)
     zephyr_library_include_directories(${RT1015_BOARD_DIR}/xip)
   endif()

boards/nxp/mimxrt1020_evk/CMakeLists.txt

@@ -13,7 +13,7 @@ if(CONFIG_NXP_IMXRT_BOOT_HEADER)
      "update your flash configuration or device configuration data blocks")
   endif()
   set(RT1020_BOARD_DIR
-    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk/boards/evkmimxrt1020")
+    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk-ng/boards/evkmimxrt1020")
   if(CONFIG_BOOT_FLEXSPI_NOR)
     # Include flash configuration block for RT1020 EVK from NXP's HAL.
     # This configuration block may need modification if another flash chip is

boards/nxp/mimxrt1024_evk/CMakeLists.txt

@@ -13,7 +13,7 @@ if(CONFIG_NXP_IMXRT_BOOT_HEADER)
      "update your flash configuration or device configuration data blocks")
   endif()
   set(RT1024_BOARD_DIR
-    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk/boards/evkmimxrt1024")
+    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk-ng/boards/evkmimxrt1024")
   if(CONFIG_BOOT_FLEXSPI_NOR)
     # Include flash configuration block for RT1024 EVK from NXP's HAL.
     # This configuration block may need modification if another flash chip is

boards/nxp/mimxrt1040_evk/CMakeLists.txt

@@ -18,7 +18,7 @@ if(CONFIG_NXP_IMXRT_BOOT_HEADER)
      "update your flash configuration or device configuration data blocks")
   endif()
   set(RT1040_BOARD_DIR
-    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk/boards/evkmimxrt1040")
+    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk-ng/boards/evkmimxrt1040")
   if(CONFIG_BOOT_FLEXSPI_NOR)
     # Include flash configuration block for RT1040 EVK from NXP's HAL.
     # This configuration block may need modification if another flash chip is

boards/nxp/mimxrt1050_evk/CMakeLists.txt

@@ -24,7 +24,7 @@ if(CONFIG_NXP_IMXRT_BOOT_HEADER)
     set(FLASH_CONF evkbimxrt1050_flexspi_nor_config.c)
   endif()
   set(RT1050_BOARD_DIR
-    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk/boards/evkbimxrt1050")
+    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk-ng/boards/evkbimxrt1050")
   if(CONFIG_BOOT_FLEXSPI_NOR)
     # Include flash configuration block for RT1050 EVK from NXP's HAL.
     # This configuration block may need modification if another flash chip is

boards/nxp/mimxrt1060_evk/CMakeLists.txt

@@ -33,7 +33,7 @@ if(CONFIG_NXP_IMXRT_BOOT_HEADER)
     set(BOARD_NAME evkbmimxrt1060)
   endif()
   set(RT1060_BOARD_DIR
-    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk/boards/${BOARD_NAME}")
+    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk-ng/boards/${BOARD_NAME}")
   if(CONFIG_BOOT_FLEXSPI_NOR)
     # Include flash configuration block for RT1060 EVK from NXP's HAL.
     # This configuration block may need modification if another flash chip is

boards/nxp/mimxrt1062_fmurt6/CMakeLists.txt

@@ -14,7 +14,7 @@ if(CONFIG_NXP_IMXRT_BOOT_HEADER)
     set(BOARD_NAME evkbimxrt1050)
   endif()
   set(RT1062_BOARD_DIR
-    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk/boards/${BOARD_NAME}")
+    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk-ng/boards/${BOARD_NAME}")
   if(CONFIG_BOOT_FLEXSPI_NOR)
     # Include flash configuration block for RT1050 EVK from NXP's HAL.
     # This configuration block may need modification if another flash chip is

boards/nxp/mimxrt1064_evk/CMakeLists.txt

@@ -18,7 +18,7 @@ if(CONFIG_NXP_IMXRT_BOOT_HEADER)
      "update your flash configuration or device configuration data blocks")
   endif()
   set(RT1064_BOARD_DIR
-    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk/boards/evkmimxrt1064")
+    "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk-ng/boards/evkmimxrt1064")
   if(CONFIG_BOOT_FLEXSPI_NOR)
     # Include flash configuration block for RT1064 EVK from NXP's HAL.
     # This configuration block may need modification if another flash chip is