Installation

[Trunks1982]

Hallo ich habe eine Frage könnte man nicht diesen Installationsprozess vereinfachen?
Ohne extra Linux ist das anscheinend so nicht möglich.
Wäre es nicht von Vorteil wenn man eine yaml für esphome hat die man einfügt und dann bestimmte Prozesse durch geht?
Bin zwar schon ein wenig mit ESPHome bewandert aber die Installation versteht ja kein mensch:-)

MFG
Christoph

[top-gun]

You can provision and manage the ESP32 directly from your Home Assistant-installation, ESPHome can run as an Add-On to HA.

I wrote a guide, it's actually in German. The config is in the guide:

https://docs.google.com/document/d/1W33jPQH4uAfSzb8rHvg7sBFm9zY_D-149qrtlnRN2xQ/edit?usp=sharing

Google Docs can translate the guide to English. I checked, and the translation was pretty good.

[Trunks1982]

Super Danke.Ich habe jetzt drei mal versucht den zweiten flashvorgang ans laufen zubekommen.Nach dem die yaml config getauscht habe und dann geflasht habe verbindet sichvder esp nicht mehr mit dem wlan. Also sehe dann auch keine logs umd die mac adresse zusehn.

[top-gun]

Super Danke.Ich habe jetzt drei mal versucht den zweiten flashvorgang ans laufen zubekommen.Nach dem die yaml config getauscht habe und dann geflasht habe verbindet sichvder esp nicht mehr mit dem wlan. Also sehe dann auch keine logs umd die mac adresse zusehn.

Secrets.yaml enthält die richtigen Daten für das Wlan?

Das Log kann man auch ohne wlan lesen wenn der esp per usb am raspi hängt.

[Trunks1982]

Ja secrets enthällt alles. Benutze es schon für andere Projekte. Was mir aufgefallen ist das ich bei meinem esp32 s3 nicht generic nutzen kann. Muss glaub m5stack s3 nutzen. So wie es aussieht ist er jetzt im Wlan aber kann über wireless logs nicht draufzugreifen weil der ...local nicht richtig ist, obwohl alles eins zu eins rauskopiert habe.

[Trunks1982]

Jetzt hab ich ihm in der yaml eine feste ip vergeben.Jetzt kam ich an die logs

[Trunks1982]

Top jetzt funktioniert alles. Jetzt fehlt nur noch zb SOC oder aber Ladestecker angeschlossen ist. Dann kann man das super mit evcc verwenden.

[top-gun]

Top jetzt funktioniert alles. Jetzt fehlt nur noch zb SOC oder aber Ladestecker angeschlossen ist. Dann kann man das super mit evcc verwenden.

Man kann das doch alles direkt in HA tun, EVCC ist so nicht nötig.

[Trunks1982]

Ja aber dann müsste ich alles selber mit automatisierungen erstellen und evcc ist echt gut drin.

[Trunks1982]

Top jetzt funktioniert alles. Jetzt fehlt nur noch zb SOC oder aber Ladestecker angeschlossen ist. Dann kann man das super mit evcc verwenden.

Man kann das doch alles direkt in HA tun, EVCC ist so nicht nötig.

Hi ich hab deine Automatisierung gesehn, meinst man bekommt das ähnlich hin wie bei evcc?
Zb planen einer Ladung und diese akku oder Hausprio?

[KirkKirk]

@top-gun , thanks for the manual, it is very helpful.
Following your instructions, I installed it and received the menu. I noticed that I have some errors in the log. Can you confirm if this is normal?

HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
 - framework-espidf @ 3.50301.0 (5.3.1) 
 - tool-cmake @ 3.16.9 
 - tool-ninja @ 1.10.2 
 - tool-riscv32-esp-elf-gdb @ 12.1.0+20221002 
 - tool-xtensa-esp-elf-gdb @ 12.1.0+20221002 
 - toolchain-esp32ulp @ 2.35.0-20220830 
 - toolchain-xtensa-esp-elf @ 13.2.0+20240530
Reading CMake configuration...
[nanopb] Installing gRPC dependencies
error: externally-managed-environment

× This environment is externally managed
╰─> To install Python packages system-wide, try apt install
    python3-xyz, where xyz is the package you are trying to
    install.
    
    If you wish to install a non-Debian-packaged Python package,
    create a virtual environment using python3 -m venv path/to/venv.
    Then use path/to/venv/bin/python and path/to/venv/bin/pip. Make
    sure you have python3-full installed.
    
    If you wish to install a non-Debian packaged Python application,
    it may be easiest to use pipx install xyz, which will manage a
    virtual environment for you. Make sure you have pipx installed.
    
    See /usr/share/doc/python3.11/README.venv for more information.

note: If you believe this is a mistake, please contact your Python installation or OS distribution provider. You can override this, at the risk of breaking your Python installation or OS, by passing --break-system-packages.
hint: See PEP 668 for the detailed specification.
[nanopb] No generation needed.
[nanopb] Installing gRPC dependencies
error: externally-managed-environment

× This environment is externally managed
╰─> To install Python packages system-wide, try apt install
    python3-xyz, where xyz is the package you are trying to
    install.
    
    If you wish to install a non-Debian-packaged Python package,
    create a virtual environment using python3 -m venv path/to/venv.
    Then use path/to/venv/bin/python and path/to/venv/bin/pip. Make
    sure you have python3-full installed.
    
    If you wish to install a non-Debian packaged Python application,
    it may be easiest to use pipx install xyz, which will manage a
    virtual environment for you. Make sure you have pipx installed.
    
    See /usr/share/doc/python3.11/README.venv for more information.

note: If you believe this is a mistake, please contact your Python installation or OS distribution provider. You can override this, at the risk of breaking your Python installation or OS, by passing --break-system-packages.
hint: See PEP 668 for the detailed specification.
[nanopb] No generation needed.
Dependency Graph
|-- TeslaBLE @ 2.2.1+sha.cd7be88
|-- noise-c @ 0.1.6
Compiling .pioenvs/tesla-test-fd8adc/src/main.cpp.o
Linking .pioenvs/tesla-test-fd8adc/firmware.elf

[Trunks1982]

Die hab ich auch.Aber funktioniert alles.

[KirkKirk]

In my case, Bluetooth doesn't connect.

[top-gun]

In my case, Bluetooth doesn't connect.

This should be accompanied by a log :)

The part of the log that you showed upstairs is just a notification by the devs of the python environment that they don't like how python is installed in the add-on. You can ignore that, it's a disagreement between the developers of python and add-on.

[KirkKirk]

Thanks mate. Sorry about that I missed that. ``` INFO ESPHome 2024.12.4 INFO Reading configuration /config/esphome/tesla-test-fd8adc.yaml... WARNING The selected ESP-IDF framework version is not the recommended one. If there are connectivity or build issues please remove the manual version. WARNING The selected ESP-IDF framework version is not the recommended one. If there are connectivity or build issues please remove the manual version. INFO Detected timezone 'Australia/Sydney' INFO Starting log output from 192.168.1.40 using esphome API INFO Successfully connected to tesla-test-fd8adc @ 192.168.1.40 in 0.023s INFO Successful handshake with tesla-test-fd8adc @ 192.168.1.40 in 0.125s [09:45:34][I][app:100]: ESPHome version 2024.12.4 compiled on Feb 19 2025, 02:59:17 [09:45:34][I][app:102]: Project yoziru.esphome-tesla-ble version 2024.8.1 [09:45:42][W][ble_rssi_sensor:061]: [BLE Signal] Cannot poll, not connected ```

…

On Wed, 19 Feb 2025, 8:59 am top-gun, ***@***.***> wrote: In my case, Bluetooth doesn't connect. This should be accompanied by a log :) The part of the log that you showed upstairs is just a notification by the devs of the python environment that they don't like how python is installed in the add-on. You can ignore that, it's a disagreement between the developers of python and add-on. — Reply to this email directly, view it on GitHub <#112 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AHK7KIDP4QGURJ22R3SMFJL2QOUL7AVCNFSM6AAAAABWYUETC2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNRXGAYTOOBUGQ> . You are receiving this because you commented.Message ID: ***@***.***> [image: top-gun]*top-gun* left a comment (yoziru/esphome-tesla-ble#112) <#112 (comment)> In my case, Bluetooth doesn't connect. This should be accompanied by a log :) The part of the log that you showed upstairs is just a notification by the devs of the python environment that they don't like how python is installed in the add-on. You can ignore that, it's a disagreement between the developers of python and add-on. — Reply to this email directly, view it on GitHub <#112 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AHK7KIDP4QGURJ22R3SMFJL2QOUL7AVCNFSM6AAAAABWYUETC2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNRXGAYTOOBUGQ> . You are receiving this because you commented.Message ID: ***@***.***>

[top-gun]

At what point in the process are you, did you get the vehicle‘s BLE address yet with the BLE listener function?

Did you push your key to the car?

This is a multi step process. At first, you program the esp with the BLE listener function to get the car‘s BLE Mac address. Don‘t use other apps as you will get the wrong number,
Then you add the address to the config, deactivate the ble listener and program again. Now you push the key to the car to establish the control for the future. Now you can connect and control the car.