YAML Example for Esphome?

[Oakman-Dev]

Would it be possible for you to share an example YAML on how to use this? I'm designing a open-source PCB to work inside a Jura with an EPS32 and this would pair perfectly.

[Oakman-Dev]

I've tried the below with no success:

  external_components:
  - source: github://xdecock/esphome-jura
    components: [jura]
    refresh: 1s
    
  uart:
    tx_pin: GPIO22
    rx_pin: GPIO21
    baud_rate: 9600
    id: uart_bus

    sensor:
  - platform: jura
    ristretto:
      name: "Ristretto Count"
  - platform: jura
    ristretti:
      name: "Ristretti Count"
  - platform: jura
    espresso:
      name: "Espresso Count"
  - platform: jura
    espressi:
      name: "Espressi Count"
  - platform: jura
    coffee:
      name: "Coffee Count"
  - platform: jura
    double_coffee:
      name: "Double Coffee Count"
  - platform: jura
    powder_coffee:
      name: "Powder Coffee Count"
  - platform: jura
    cappuccino:
      name: "Cappuccino Count"
  - platform: jura
    latte_machiato:
      name: "Latte Macchiato Count"
  - platform: jura
    milk:
      name: "Milk Count"
  - platform: jura
    water:
      name: "Water Count"
  - platform: jura
    cleaning:
      name: "Cleaning Status"
  - platform: jura
    cappuccino_cleaning:
      name: "Cappuccino Cleaning Status"
  - platform: jura
    water_filter:
      name: "Water Filter Status"```

[xdecock]

what jura do you have? i have a J6, and it was a mess to get all the commands, I'd probably need to add a way to provide the mapping

[Oakman-Dev]

@xdecock I've got the XJ9, so should be the same commands/structure from what I've gathered. I'm happy to do some testing and provide a PR for anything I discover.

The main issue I'm facing right now is just how to get the Esphome portion working as I can't seem to build it properly. Is the YAML example above close to your implementation, or how did you craft yours?

[xdecock]

Impressa J9 here, sorry

esphome:
  name: "coffee"
  friendly_name: "coffee"
  platformio_options:
    board_build.flash_mode: dio

external_components:
  - source: github://xdecock/esphome-jura@main

esp32:
  board: lolin_c3_mini
  framework:
    type: esp-idf

# Enable Home Assistant API
api:
  encryption:
    key: "random="

ota:
  password: "random"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  output_power: 8.5


# Enable logging
logger:
  level: DEBUG
  hardware_uart: USB_SERIAL_JTAG
#  level: INFO

uart:
  tx_pin: GPIO7 # D3
  rx_pin: GPIO8 # D2
  baud_rate: 9600
  rx_buffer_size: 256
  id: uart_bus

#debug:

# Example configuration entry
time:
  - platform: homeassistant
    id: homeassistant_time
    update_interval: 600s

sensor:
  # Uptime sensor.
  - platform: uptime
    name:  Uptime
  - platform: jura
    id: num_espresso
    espresso:
      name: Espresso
    espressi:
      name: Espressi
    ristretto:
      name: Ristretto
    ristretti:
      name: Ristretti
    coffee:
      name: Coffee
    double_coffee:
      name: Double Coffee
    powder_coffee:
      name: Powder Coffee
    cappuccino:
      name: Cappuccino
    
    
switch:
  # Example configuration entry
  - platform: gpio
    pin: GPIO10 #D1
    id: power_on
    name: "Power On"
    on_turn_on:
    - delay: 200ms
    - switch.turn_off: power_on
    restore_mode: ALWAYS_OFF

#custom_component:
#- lambda: |-
#    auto my_jura = new JuraCoffee(id(uart_bus),id(num_espresso), id(num_double_espressi), id(num_ristretto), id(num_double_ristretti), id(num_big_coffee), id(num_double_coffee), id(num_cappuccino), id(num_latte_machiato), id(num_powder_coffee), id(num_milk), id(num_water), id(num_cleaning), id(num_cappuccino_cleaning), id(num_filters), id(power_status), id(err_tray), id(err_tank), id(err_grounds), id(rinsing_status));
#    App.register_component(my_jura);
#    return {my_jura};

Here is my yaml slightly pruned.

The tricky part is finding the correct numbers and offset for the counters i initialy implemented a custom uart component, and it was tricky to get the records.

[Oakman-Dev]

Thank you, I'll give this a shot and see what I can get working. I saw in your code that you've made some room for stuff like actually pressing buttons/actions and sensors for power, tray, water etc. Is that something you're working on implementing as well, and would you want help discovering those commands?

[xdecock]

no, i got all the commands, but they're exposed as service, i just need to document how you can call them, but i got home assistant automations on those.

i call : esphome: coffee_press_coffee (which presses the coffee button) for double coffee you need double call with a 400ms delay) and in my experience a 80s is a good delay after a double coffee to do a quad coffee, but ymmv

[Oakman-Dev]

I've been playing around with this for a few weeks now and I've gotten the buttons to work (make a espresso etc), but for the life of me I can't get the sensors/water/tray/number of cups to work with the YAML above. Any chance you could give a pointer on how to call those or check if the YAML you posted above is correct?

[xdecock]

Water and tray i'm not sure i got them right if i remember correctly there's some register read that provide bits but i never quite got which bit means what, the counters were ok, but error fields looked from what i remember as a complex set of combinations and each time inthought i got the right one i saw nothing change with another set of conditions, i suspect we can get all internal binary sensors Le ven. 10 nov. 2023, 14:28, Oakman ***@***.***> a écrit :

…

I've been playing around with this for a few weeks now and I've gotten the buttons to work (make a espresso etc), but for the life of me I can't get the sensors/water/tray/number of cups to work with the YAML above. Any chance you could give a pointer on how to call those or check if the YAML you posted above is correct? — Reply to this email directly, view it on GitHub <#1 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAAME7LCZSW2RK4HIVTHL33YDYTXRAVCNFSM6AAAAAA6OJV2DGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBVG4ZDMMRQGU> . You are receiving this because you were mentioned.Message ID: ***@***.***>