Creating subplots with PlotAll

[Nadryby13]

Hello inventor of predictr,

the predictr module is very nice for my work. Unfortunately, I am not a python expert. Is there any possibilty to create own window with the the weibull probaibilty plot, and the contour plot? This would be very nice!

Thank you in advance!

Kind regards
patrick

[tvtoglu]

Hi Patrick,

glad to hear that you're using predictr.

What do mean exactly? Putting both the Weibull Plot and contour plot in the same figure?
That is currently not possible. But let me know what you mean exactly and maybe I can implement that functionality.

Best regards
Tamer

[Nadryby13]

Hi Tamer, nice to hear from you! Sorry, I didn´t explain that what I meant very well. At first, I want to explain you what I am doing. I do a lot of experiments to investigate the lifetime of organic isolators by applying different high voltages. The times to failure follow the Weibull distribution. My basic task is to estimate the lifetime of such materials at lower voltage, that means I am extrapolating the data gained from my test by using the inverse power law. At bottom, you see a GUI programmed by myself. What I have meant with the Weibull and the contour plot in one window is explained in the picture. [Contourplot beta ,eta][Weibull ***@***.*** Thank you very much! Kind regards Patrick Schrödl Infineon Technologies AG Engineer Material Innovation BE DEV I M IF Office: +49 941 202 6101 Mobile: +49 151 46121394 ***@***.******@***.***> Wernerwerkstr. 2 93049 Regensburg Germany www.infineon.com<http://www.infineon.com> Our stories<https://www.infineon.com/about/our-stories> YouTube<https://www.youtube.com/c/infineontechnologiesag> LinkedIn<https://www.linkedin.com/company/infineon-technologies> Instagram<https://www.instagram.com/infineon_technologies> Infineon Technologies AG Chairman of the Supervisory Board: Dr. Herbert Diess Management Board: Jochen Hanebeck (CEO), Elke Reichart, Dr. Sven Schneider, Andreas Urschitz, Dr. Rutger Wijburg Registered office: Neubiberg Commercial register: München HRB 126492 Lobby Register entry: R001801 This e-mail and any attachments are confidential. They are intended solely for the attention and use of the named addressee(s). If you are not the named addressee(s) you must not use, disclose, retain or reproduce all or any part of the information contained in this e-mail or any attachments. Any unauthorized use or disclosure may be unlawful. If you have received this e-mail by mistake, please inform the sender immediately and delete it and all copies from your system and destroy any hard copies of it. From: tvtoglu ***@***.***> Sent: Freitag, 11. Juli 2025 20:39 To: tvtoglu/predictr ***@***.***> Cc: Schroedl Patrick (BE DEV I M IF) ***@***.***>; Author ***@***.***> Subject: Re: [tvtoglu/predictr] Creating subplots with PlotAll (Discussion #14) Caution: This e-mail originated outside Infineon Technologies. Please be cautious when sharing information or opening attachments especially from unknown senders. Refer to our intranet guide<https://intranet-content.infineon.com/explore/aboutinfineon/rules/informationsecurity/ug/SocialEngineering/Pages/SocialEngineeringElements_en.aspx> to help you identify Phishing email. Hi Patrick, glad to hear that you're using predictr. What do mean exactly? Putting both the Weibull Plot and contour plot in the same figure? That is currently not possible. But let me know what you mean exacted and maybe I can implement that functionality. Best regards Tamer — Reply to this email directly, view it on GitHub<#14 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BREDXTRADRGGHIT36TREOBD3IAADXAVCNFSM6AAAAACBKKROGGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGNZTGQ3TGMY>. You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>>