What's the expected result for Test-Hardware? #27
Description
Hey,
so I'm trying hidapitester on Windows 10 with an Arduino Pro Micro and the supplied Test-Code for the Arduino Micro.
I am able to send and receive regular reports, but no feature reports (wrote -1 bytes).
> hidapitester.exe --vidpid 1b4f:9206 --open --get-report-descriptor
Opening device, vid/pid: 0x1B4F/0x9206
Report Descriptor:
06 C0 FF 0A 00 0C A1 01 09 01 15 00 26 FF 00 75 08 95 40 81 02 09 02 15 00 26 FF 00 75 08 95 40
91 02 C0
Closing device
> hidapitester.exe --vidpid 1b4f:9206 --open -t 2000 --read-input
Opening device, vid/pid: 0x1B4F/0x9206
Reading 64-byte input report 0, 2000 msec timeout...read 64 bytes:
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F
Closing device
> hidapitester.exe --vidpid 1b4f:9206 --open -l 2 --send-output 0,1
Opening device, vid/pid: 0x1B4F/0x9206
Writing output report of 2-bytes...wrote 65 bytes:
00 01
Closing device
> hidapitester.exe --vidpid 1b4f:9206 --open -l 2 --send-feature 0,1
Opening device, vid/pid: 0x1B4F/0x9206
Writing 2-byte feature report...wrote -1 bytes:
00 01
Closing device
Is this expected? Or should I be able to send feature reports?
Docs read
The sketch recives 64-byte Output or Feature reports, and prints them to Serial Monitor
So I guess not being able to send a feature report is an issue?
Getting the same result on 3 different Windows 10 PCs.