Merge pull request #97 from tetrabiodistributed/june-2022-release-candidate

june 2022 release candidate

Author: mmroden

content/en/build-guide/_index.adoc renamed to content/en/v1.0/_index.adoc

@@ -1,11 +1,13 @@
 
-
 ---
 title: "PAPRa Build Guide (June 2022 Edition)"
 linkTitle: "PAPRa Build Guide"
 weight: 1
 description: >
   How to build the June 2022 version of the Tetra PAPR.
+aliases:
+  - /v1.0
+  - /1.0
 ---
 
 == Quick Synopsis

content/en/build-guide/fan-box.adoc renamed to content/en/v1.0/fan-box.adoc

@@ -4,6 +4,9 @@ linkTitle: "PAPRa Fan Box"
 weight: 1
 description: >
   How-To guide for building the Tetra PAPRa fan box (June 2022 version).
+aliases:
+  - /v1.0/fan-box
+  - /1.0/fan-box
 ---
 
 == Quick Synopsis ==

content/en/build-guide/m12-circuit.adoc renamed to content/en/v1.0/m12-circuit.adoc

@@ -1,18 +1,21 @@
----
-title: "PAPRa M12 PCB"
-linkTitle: "PAPRa M12 PCB"
-weight: 1
-description: >
-  The printed circuit board for the Tetra PAPRa M12 controller
----
-
-== Quick Synopsis ==
-
-The following is the board diagram for the M12 controller PCB.  Further information can be found in https://github.com/tetrabiodistributed/PAPRA-PCB[the PAPRA-PCB project.]
-
-*WARNING:* we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so.  The only way to truly test one of these devices using something like a https://tsi.com/products/respirator-fit-testers/portacount-respirator-fit-tester-8038/[Portacount] under controlled conditions.
-
-== Board Diagram == 
-
-{{< embed-pdf hidePaginator=true url="./D-TET-001100-0 Papra PCBA Drawing.pdf" >}}
-
+---
+title: "PAPRa M12 PCB"
+linkTitle: "PAPRa M12 PCB"
+weight: 1
+description: >
+  The printed circuit board for the Tetra PAPRa M12 controller
+aliases:
+  - /v1.0/m12-circuit
+  - /1.0/m12-circuit
+---
+
+== Quick Synopsis ==
+
+The following is the board diagram for the M12 controller PCB.  Further information can be found in https://github.com/tetrabiodistributed/PAPRA-PCB[the PAPRA-PCB project.]
+
+*WARNING:* we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so.  The only way to truly test one of these devices using something like a https://tsi.com/products/respirator-fit-testers/portacount-respirator-fit-tester-8038/[Portacount] under controlled conditions.
+
+== Board Diagram == 
+
+{{< embed-pdf hidePaginator=true url="./D-TET-001100-0 Papra PCBA Drawing.pdf" >}}
+

content/en/build-guide/m12-v1.adoc renamed to content/en/v1.0/m12-v1.adoc

@@ -4,6 +4,9 @@ linkTitle: "PAPRa m12 Battery Controller (v1)"
 weight: 1
 description: >
   How-To guide for building the Tetra PAPRa m12 battery controller (October 2020 version).
+aliases:
+  - /v1.0/m12-v1
+  - /1.0/m12-v1
 ---
 
 == Quick Synopsis