How to change max charging values? #163

carmelo42 · 2024-12-12T09:24:50Z

carmelo42
Dec 12, 2024

Hi !
How can I change the max AC charging value ?
I tried this :

output:
  - platform: pipsolar
    pipsolar_id: inverter0
    battery_recharge_voltage:
      id: inverter0_battery_recharge_voltage_out
    current_max_ac_charging_current:
      id: inverter0_current_max_ac_charging_current
      possible_values: [10,20,30,40]
    current_max_charging_current:
      id: inverter0_current_max_charging_current
      possible_values: [10,20,30,40]

But I can't see how to change the values from Home Assistant.

Thanks ;)

botr76 · 2025-02-09T19:21:29Z

botr76
Feb 9, 2025

did you solve the problem? how to change the current value in HA?

0 replies

carmelo42 · 2025-02-12T12:57:55Z

carmelo42
Feb 12, 2025
Author

Yes, with this code:

# Warning:
#
# If you configure a lot of the possible sensors etc. it could be that you run
# out of memory (on esp8266). If you configure nearly all sensors etc. you run
# in a stack-size issue. In this case you have to increase stack size!
#
#  https://github.com/esphome/issues/issues/855

substitutions:
  name: pipsolar
  tx_pin: GPIO16
  rx_pin: GPIO17

esphome:
  name: ${name}
  min_version: 2024.6.0
  project:
    name: "syssi.esphome-pipsolar@main"
    version: 1.0.0

external_components:
  - source: github://syssi/esphome-pipsolar@pip8048
    refresh: 0s

esp32:
  board: wemos_d1_mini32
  framework:
    type: esp-idf

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

ota:
  platform: esphome

logger:
  baud_rate: 0
  level: DEBUG

# If you use Home Assistant please remove this `mqtt` section and uncomment the `api` component!
# The native API has many advantages over MQTT: https://esphome.io/components/api.html#advantages-over-mqtt
mqtt:
  broker: !secret mqtt_host
  username: !secret mqtt_username
  password: !secret mqtt_password
  id: mqtt_client



uart:
  - id: uart_0
    baud_rate: 2400
    tx_pin: ${tx_pin}
    rx_pin: ${rx_pin}

pipsolar:
  uart_id: uart_0
  id: inverter0

sensor:
  - platform: pipsolar
    pipsolar_id: inverter0
    # QPIRI

    current_max_ac_charging_current:
      name: "${name} current_max_ac_charging_current"
    current_max_charging_current:
      name: "${name} current_max_charging_current"


    # QPIGS
    grid_voltage:
      name: "${name} grid_voltage"
    grid_frequency:
      name: "${name} grid_frequency"
    ac_output_voltage:
      name: "${name} ac_output_voltage"
    ac_output_frequency:
      name: "${name} ac_output_frequency"
    ac_output_apparent_power:
      name: "${name} ac_output_apparent_power"
    ac_output_active_power:
      name: "${name} ac_output_active_power"
    output_load_percent:
      name: "${name} output_load_percent"
    bus_voltage:
      name: "${name} bus_voltage"
    battery_voltage:
      name: "${name} battery_voltage"
    battery_charging_current:
      name: "${name} battery_charging_current"
    battery_capacity_percent:
      name: "${name} battery_capacity_percent"
    inverter_heat_sink_temperature:
      name: "${name} inverter_heat_sink_temperature"
    pv1_input_current:
      name: "${name} pv1_input_current"
    pv1_input_voltage:
      name: "${name} pv1_input_voltage"
    pv2_input_current:
      name: "${name} pv2_input_current"
    pv2_input_voltage:
      name: "${name} pv2_input_voltage"
    battery_voltage_scc:
      name: "${name} battery_voltage_scc"
    battery_discharge_current:
      name: "${name} battery_discharge_current"
    battery_voltage_offset_for_fans_on:
      name: "${name} battery_voltage_offset_for_fans_on"
    pv1_charging_power:
      name: "${name} pv1_charging_power"
    pv2_charging_power:
      name: "${name} pv2_charging_power"

text_sensor:
  - platform: pipsolar
    pipsolar_id: inverter0
    device_mode:
      name: "${name} device_mode"


binary_sensor:
  - platform: pipsolar
    pipsolar_id: inverter0
    add_sbu_priority_version:
      name: "${name} add_sbu_priority_version"
    configuration_status:
      name: "${name} configuration_status"

    load_status:
      name: "${name} load_status"
    battery_voltage_to_steady_while_charging:
      name: "${name} battery_voltage_to_steady_while_charging"
    charging_status:
      name: "${name} charging_status"
    scc_charging_status:
      name: "${name} scc_charging_status"
    ac_charging_status:
      name: "${name} ac_charging_status"
    charging_to_floating_mode:
      name: "${name} charging_to_floating_mode"
    switch_on:
      name: "${name} switch_on"

    silence_buzzer_open_buzzer:
      name: "${name} silence_buzzer_open_buzzer"
    overload_bypass_function:
      name: "${name} overload_bypass_function"
    lcd_escape_to_default:
      name: "${name} lcd_escape_to_default"
    overload_restart_function:
      name: "${name} overload_restart_function"
    over_temperature_restart_function:
      name: "${name} over_temperature_restart_function"
#    backlight_on:
#      name: "${name} backlight_on"

switch:
  - platform: pipsolar
    pipsolar_id: inverter0
    output_source_priority_utility:
      name: "${name} output_source_priority_utility"
    output_source_priority_solar:
      name: "${name} output_source_priority_solar"
    output_source_priority_battery:
      name: "${name} output_source_priority_battery"
    input_voltage_range:
      name: "${name} input_voltage_range"
    pv_ok_condition_for_parallel:
      name: "${name} pv_ok_condition_for_parallel"
    pv_power_balance:
      name: "${name} pv_power_balance"

output:
  - platform: pipsolar
    pipsolar_id: inverter0
    battery_recharge_voltage:
      id: inverter0_battery_recharge_voltage_out

  - platform: pipsolar
    pipsolar_id: inverter0
    battery_bulk_voltage:
      id: inverter0_battery_bulk_voltage_out


  - platform: pipsolar
    pipsolar_id: inverter0
    current_max_charging_current:
      name: ${name} current_max_charging_current_select
      optionsmap:
        "10A": "MCHGC010"
        "20A": "MCHGC020"
        "30A": "MCHGC030"
        "40A": "MCHGC040"

      statusmap:
        "10": "10A"
        "20": "20A"
        "30": "30A"
        "40": "40A"

2 replies

SalvoR93 Mar 19, 2025

why doesn't it work for me? :-(

WildeRNS Apr 9, 2025

Try this:

- platform: pipsolar
   pipsolar_id: inverter0
   current_max_charging_current:
     name: ${name} current_max_charging_current_select
     optionsmap:
       "10A": "MCHGC0010"
       "20A": "MCHGC0020"
       "30A": "MCHGC0030"
       "40A": "MCHGC0040"
     statusmap:
       "10": "10A"
       "20": "20A"
       "30": "30A"
       "40": "40A"

SalvoR93 · 2025-04-09T20:49:51Z

SalvoR93
Apr 9, 2025

Hi dear, this is my configuration, where do i put what you told me? substitutions: name_bms: BMS name_inverter: Inverter device_description: "Monitor Inverter e BMS" external_components_source: ***@***.*** mac_address: D0:18:10:01:17:BB tx_pin: GPIO16 rx_pin: GPIO17 esphome: name: bms friendly_name: BMS esp32: board: esp32dev framework: type: esp-idf external_components: - source: ${external_components_source} refresh: 0s uart: - id: uart_0 baud_rate: 2400 tx_pin: ${tx_pin} rx_pin: ${rx_pin} logger: baud_rate: 0 # Disabilita la seriale per Modbus # Enable Home Assistant API api: encryption: key: "B/L/7rx99j20w82wpHpOYJqMsjmNbD+/0SymQINqHQM=" ota: - platform: esphome password: "3f71ffc00fe81a11afe3326747a4ad06" wifi: ssid: !secret wifi_ssid password: !secret wifi_password # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "Bms Fallback Hotspot" password: "jZ3z4Xiu0qDC" captive_portal: web_server: esp32_ble_tracker: scan_parameters: active: false ble_client: - mac_address: ${mac_address} id: client0 daly_bms_ble: - ble_client_id: client0 id: bms0 password: 12345678 update_interval: 3s binary_sensor: - platform: daly_bms_ble daly_bms_ble_id: bms0 balancing: name: "${name_bms} balancing" charging: name: "${name_bms} charging" discharging: name: "${name_bms} discharging" - platform: pipsolar pipsolar_id: inverter0 add_sbu_priority_version: name: "${name_inverter} add_sbu_priority_version" configuration_status: name: "${name_inverter} configuration_status" sensor: - platform: daly_bms_ble daly_bms_ble_id: bms0 error_bitmask: name: "${name_bms} error bitmask" total_voltage: name: "${name_bms} total voltage" current: name: "${name_bms} current" power: name: "${name_bms} power" charging_power: name: "${name_bms} charging power" discharging_power: name: "${name_bms} discharging power" state_of_charge: name: "${name_bms} state of charge" charging_cycles: name: "${name_bms} charging cycles" min_cell_voltage: name: "${name_bms} min cell voltage" max_cell_voltage: name: "${name_bms} max cell voltage" min_voltage_cell: name: "${name_bms} min voltage cell" max_voltage_cell: name: "${name_bms} max voltage cell" delta_cell_voltage: name: "${name_bms} delta cell voltage" average_cell_voltage: name: "${name_bms} average cell voltage" temperature_1: name: "${name_bms} temperature 1" temperature_2: name: "${name_bms} temperature 2" temperature_3: name: "${name_bms} temperature 3" temperature_4: name: "${name_bms} temperature 4" cell_voltage_1: name: "${name_bms} cell voltage 1" cell_voltage_2: name: "${name_bms} cell voltage 2" cell_voltage_3: name: "${name_bms} cell voltage 3" cell_voltage_4: name: "${name_bms} cell voltage 4" cell_voltage_5: name: "${name_bms} cell voltage 5" cell_voltage_6: name: "${name_bms} cell voltage 6" cell_voltage_7: name: "${name_bms} cell voltage 7" cell_voltage_8: name: "${name_bms} cell voltage 8" cell_voltage_9: name: "${name_bms} cell voltage 9" cell_voltage_10: name: "${name_bms} cell voltage 10" cell_voltage_11: name: "${name_bms} cell voltage 11" cell_voltage_12: name: "${name_bms} cell voltage 12" cell_voltage_13: name: "${name_bms} cell voltage 13" cell_voltage_14: name: "${name_bms} cell voltage 14" cell_voltage_15: name: "${name_bms} cell voltage 15" cell_voltage_16: name: "${name_bms} cell voltage 16" cell_count: name: "${name_bms} cell count" temperature_sensors: name: "${name_bms} temperature sensors" capacity_remaining: name: "${name_bms} capacity remaining" - platform: pipsolar pipsolar_id: inverter0 grid_rating_voltage: name: "${name_inverter} grid_rating_voltage" grid_rating_current: name: "${name_inverter} grid_rating_current" ac_output_rating_voltage: name: "${name_inverter} ac_output_rating_voltage" ac_output_rating_frequency: name: "${name_inverter} ac_output_rating_frequency" ac_output_rating_current: name: "${name_inverter} ac_output_rating_current" ac_output_rating_apparent_power: name: "${name_inverter} ac_output_rating_apparent_power" ac_output_rating_active_power: name: "${name_inverter} ac_output_rating_active_power" battery_rating_voltage: name: "${name_inverter} battery_rating_voltage" battery_recharge_voltage: name: "${name_inverter} battery_recharge_voltage" battery_under_voltage: name: "${name_inverter} battery_under_voltage" battery_bulk_voltage: name: "${name_inverter} battery_bulk_voltage" battery_float_voltage: name: "${name_inverter} battery_float_voltage" battery_type: name: "${name_inverter} battery_type" current_max_ac_charging_current: name: "${name_inverter} current_max_ac_charging_current" current_max_charging_current: name: "${name_inverter} current_max_charging_current" input_voltage_range: name: "${name_inverter} input_voltage_range" output_source_priority: name: "${name_inverter} output_source_priority" parallel_max_num: name: "${name_inverter} parallel_max_num" machine_type: name: "${name_inverter} machine_type" topology: name: "${name_inverter} topology" output_mode: name: "${name_inverter} output_mode" battery_redischarge_voltage: name: "${name_inverter} battery_redischarge_voltage" pv_ok_condition_for_parallel: name: "${name_inverter} pv_ok_condition_for_parallel" pv_power_balance: name: "${name_inverter} pv_power_balance" grid_voltage: name: "${name_inverter} grid_voltage" ac_output_voltage: name: "${name_inverter} ac_output_voltage" ac_output_apparent_power: name: "${name_inverter} ac_output_apparent_power" ac_output_active_power: id: inverter0_ac_output_active_power name: "${name_inverter} ac_output_active_power" output_load_percent: name: "${name_inverter} output_load_percent" bus_voltage: name: "${name_inverter} bus_voltage" battery_voltage: name: "${name_inverter} battery_voltage" battery_charging_current: name: "${name_inverter} battery_charging_current" battery_capacity_percent: name: "${name_inverter} battery_capacity_percent" inverter_heat_sink_temperature: name: "${name_inverter} inverter_heat_sink_temperature" pv_input_current_for_battery: name: "${name_inverter} pv_input_current_for_battery" pv_input_voltage: name: "${name_inverter} pv_input_voltage" battery_voltage_scc: name: "${name_inverter} battery_voltage_scc" battery_discharge_current: name: "${name_inverter} battery_discharge_current" pv_charging_power: id: inverter0_pv_charging_power name: "${name_inverter} pv_charging_power" charger_source_priority: name: "${name_inverter} charger_source_priority" - platform: total_daily_energy name: "Total Daily Energy" power_id: inverter0_ac_output_active_power filters: - multiply: 0.001 unit_of_measurement: kWh device_class: energy - platform: total_daily_energy name: "Total Daily Charging Energy" power_id: inverter0_pv_charging_power filters: - multiply: 0.001 unit_of_measurement: kWh device_class: energy text_sensor: - platform: daly_bms_ble daly_bms_ble_id: bms0 errors: name: "${name_bms} errors" - platform: pipsolar pipsolar_id: inverter0 device_mode: name: "${name_inverter} device_mode" filters: map: - P -> Power on mode - S -> Standby mode - L -> Line mode - B -> Battery mode - F -> Fault mode - D -> Shutdown mode switch: - platform: daly_bms_ble balancer: name: "${name_bms} balancer" charging: name: "${name_bms} charging" discharging: name: "${name_bms} discharging" - platform: pipsolar pipsolar_id: inverter0 output_source_priority_utility: name: "${name_inverter} output_source_priority_utility" output_source_priority_solar: name: "${name_inverter} output_source_priority_solar" output_source_priority_battery: name: "${name_inverter} output_source_priority_battery" input_voltage_range: name: "${name_inverter} input_voltage_range" pv_ok_condition_for_parallel: name: "${name_inverter} pv_ok_condition_for_parallel" pv_power_balance: name: "${name_inverter} pv_power_balance" pipsolar: uart_id: uart_0 id: inverter0 button: - platform: daly_bms_ble # Retrieves the BMS settings and prints them in the ESPHome logs retrieve_settings: name: "${name_bms} retrieve settings" # Restarts the BMS restart: name: "${name_bms} restart" # Shuts down the BMS shutdown: name: "${name_bms} shutdown" # Resets the BMS to the factory settings factory_reset: name: "${name_bms} factory reset" # Resets the BMS current to zero reset_current: name: "${name_bms} reset current" - platform: template name: "Utility First" id: utility_first internal: false on_press: then: - output.pipsolar.set_level: id: inverter0_charger_source_priority_output value: 0.0 - platform: template name: "Solar First" id: solar_first internal: false on_press: then: - output.pipsolar.set_level: id: inverter0_charger_source_priority_output value: 1.0 - platform: template name: "Solar and Utility" id: solar_and_utility internal: false on_press: then: - output.pipsolar.set_level: id: inverter0_charger_source_priority_output value: 2.0 - platform: template name: "Solar Only" id: solar_only internal: false on_press: then: - output.pipsolar.set_level: id: inverter0_charger_source_priority_output value: 3.0 output: - platform: pipsolar pipsolar_id: inverter0 battery_recharge_voltage: id: inverter0_battery_recharge_voltage_out - platform: pipsolar pipsolar_id: inverter0 charger_source_priority: id: inverter0_charger_source_priority_output time: - platform: sntp id: my_time Il giorno mer 9 apr 2025 alle ore 16:19 WildeRNS ***@***.***> ha scritto:

…

Try this: - platform: pipsolar pipsolar_id: inverter0 current_max_charging_current: name: ${name} current_max_charging_current_select optionsmap: "10A": "MCHGC0010" "20A": "MCHGC0020" "30A": "MCHGC0030" "40A": "MCHGC0040" statusmap: "10": "10A" "20": "20A" "30": "30A" "40": "40A" — Reply to this email directly, view it on GitHub <#163 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AWNENMZDZELLH7IF2HS7LHD2YUUANAVCNFSM6AAAAABTPKQZH6VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENZXHEZDENY> . You are receiving this because you commented.Message ID: ***@***.***>

1 reply

WildeRNS Apr 10, 2025

in select: section

SalvoR93 · 2025-04-10T07:23:17Z

SalvoR93
Apr 10, 2025

sorry i have added this integration: select: - platform: pipsolar pipsolar_id: inverter0 current_max_charging_current: name: ${name_inverter} current_max_charging_current_select: optionsmap: "10A": "MCHGC0010" "20A": "MCHGC0020" "30A": "MCHGC0030" "40A": "MCHGC0040" statusmap: "10": "10A" "20": "20A" "30": "30A" "40": "40A" but I’m running into an error during compilation. Could you please help me understand what might be wrong with my configuration? INFO ESPHome 2025.2.2 INFO Reading configuration /config/esphome/bms.yaml... INFO Updating ***@***.*** INFO Unable to import component pipsolar.select: No module named 'esphome.components.pipsolar.select' Failed config select.pipsolar: [source /config/esphome/bms.yaml:388] Platform not found: 'select.pipsolar'. platform: pipsolar pipsolar_id: inverter0 current_max_charging_current: name: Inverter current_max_charging_current_select: optionsmap: 10A: MCHGC0010 20A: MCHGC0020 30A: MCHGC0030 40A: MCHGC0040 statusmap: 10: 10A 20: 20A 30: 30A 40: 40A Il giorno gio 10 apr 2025 alle ore 06:53 WildeRNS ***@***.***> ha scritto:

…

in *select:* section — Reply to this email directly, view it on GitHub <#163 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AWNENM55ARXAJO4S2JDIZ5T2YX2L3AVCNFSM6AAAAABTPKQZH6VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENZYGY2DQNY> . You are receiving this because you commented.Message ID: ***@***.***>

2 replies

syssi Apr 10, 2025
Maintainer

Please provide your complete YAML configuration.

WildeRNS Apr 10, 2025

external_components: - source: ${external_components_source}

What repository u are using?
You need @pip8048

SalvoR93 · 2025-04-10T16:01:26Z

SalvoR93
Apr 10, 2025

substitutions: name_bms: BMS name_inverter: Inverter device_description: "Monitor Inverter e BMS" external_components_source: ***@***.*** mac_address: D0:18:10:01:17:BB tx_pin: GPIO16 rx_pin: GPIO17 esphome: name: bms friendly_name: BMS esp32: board: esp32dev framework: type: esp-idf external_components: - source: ${external_components_source} refresh: 0s uart: - id: uart_0 baud_rate: 2400 tx_pin: ${tx_pin} rx_pin: ${rx_pin} logger: baud_rate: 0 # Disabilita la seriale per Modbus # Enable Home Assistant API api: encryption: key: "B/L/7rx99j20w82wpHpOYJqMsjmNbD+/0SymQINqHQM=" ota: - platform: esphome password: "3f71ffc00fe81a11afe3326747a4ad06" wifi: ssid: !secret wifi_ssid password: !secret wifi_password # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "Bms Fallback Hotspot" password: "jZ3z4Xiu0qDC" captive_portal: web_server: esp32_ble_tracker: scan_parameters: active: false ble_client: - mac_address: ${mac_address} id: client0 daly_bms_ble: - ble_client_id: client0 id: bms0 password: 12345678 update_interval: 3s binary_sensor: - platform: daly_bms_ble daly_bms_ble_id: bms0 balancing: name: "${name_bms} balancing" charging: name: "${name_bms} charging" discharging: name: "${name_bms} discharging" - platform: pipsolar pipsolar_id: inverter0 add_sbu_priority_version: name: "${name_inverter} add_sbu_priority_version" configuration_status: name: "${name_inverter} configuration_status" sensor: - platform: daly_bms_ble daly_bms_ble_id: bms0 error_bitmask: name: "${name_bms} error bitmask" total_voltage: name: "${name_bms} total voltage" current: name: "${name_bms} current" power: name: "${name_bms} power" charging_power: name: "${name_bms} charging power" discharging_power: name: "${name_bms} discharging power" state_of_charge: name: "${name_bms} state of charge" charging_cycles: name: "${name_bms} charging cycles" min_cell_voltage: name: "${name_bms} min cell voltage" max_cell_voltage: name: "${name_bms} max cell voltage" min_voltage_cell: name: "${name_bms} min voltage cell" max_voltage_cell: name: "${name_bms} max voltage cell" delta_cell_voltage: name: "${name_bms} delta cell voltage" average_cell_voltage: name: "${name_bms} average cell voltage" temperature_1: name: "${name_bms} temperature 1" temperature_2: name: "${name_bms} temperature 2" temperature_3: name: "${name_bms} temperature 3" temperature_4: name: "${name_bms} temperature 4" cell_voltage_1: name: "${name_bms} cell voltage 1" cell_voltage_2: name: "${name_bms} cell voltage 2" cell_voltage_3: name: "${name_bms} cell voltage 3" cell_voltage_4: name: "${name_bms} cell voltage 4" cell_voltage_5: name: "${name_bms} cell voltage 5" cell_voltage_6: name: "${name_bms} cell voltage 6" cell_voltage_7: name: "${name_bms} cell voltage 7" cell_voltage_8: name: "${name_bms} cell voltage 8" cell_voltage_9: name: "${name_bms} cell voltage 9" cell_voltage_10: name: "${name_bms} cell voltage 10" cell_voltage_11: name: "${name_bms} cell voltage 11" cell_voltage_12: name: "${name_bms} cell voltage 12" cell_voltage_13: name: "${name_bms} cell voltage 13" cell_voltage_14: name: "${name_bms} cell voltage 14" cell_voltage_15: name: "${name_bms} cell voltage 15" cell_voltage_16: name: "${name_bms} cell voltage 16" cell_count: name: "${name_bms} cell count" temperature_sensors: name: "${name_bms} temperature sensors" capacity_remaining: name: "${name_bms} capacity remaining" - platform: pipsolar pipsolar_id: inverter0 grid_rating_voltage: name: "${name_inverter} grid_rating_voltage" grid_rating_current: name: "${name_inverter} grid_rating_current" ac_output_rating_voltage: name: "${name_inverter} ac_output_rating_voltage" ac_output_rating_frequency: name: "${name_inverter} ac_output_rating_frequency" ac_output_rating_current: name: "${name_inverter} ac_output_rating_current" ac_output_rating_apparent_power: name: "${name_inverter} ac_output_rating_apparent_power" ac_output_rating_active_power: name: "${name_inverter} ac_output_rating_active_power" battery_rating_voltage: name: "${name_inverter} battery_rating_voltage" battery_recharge_voltage: name: "${name_inverter} battery_recharge_voltage" battery_under_voltage: name: "${name_inverter} battery_under_voltage" battery_bulk_voltage: name: "${name_inverter} battery_bulk_voltage" battery_float_voltage: name: "${name_inverter} battery_float_voltage" battery_type: name: "${name_inverter} battery_type" current_max_ac_charging_current: name: "${name_inverter} current_max_ac_charging_current" current_max_charging_current: name: "${name_inverter} current_max_charging_current" input_voltage_range: name: "${name_inverter} input_voltage_range" output_source_priority: name: "${name_inverter} output_source_priority" parallel_max_num: name: "${name_inverter} parallel_max_num" machine_type: name: "${name_inverter} machine_type" topology: name: "${name_inverter} topology" output_mode: name: "${name_inverter} output_mode" battery_redischarge_voltage: name: "${name_inverter} battery_redischarge_voltage" pv_ok_condition_for_parallel: name: "${name_inverter} pv_ok_condition_for_parallel" pv_power_balance: name: "${name_inverter} pv_power_balance" grid_voltage: name: "${name_inverter} grid_voltage" ac_output_voltage: name: "${name_inverter} ac_output_voltage" ac_output_apparent_power: name: "${name_inverter} ac_output_apparent_power" ac_output_active_power: id: inverter0_ac_output_active_power name: "${name_inverter} ac_output_active_power" output_load_percent: name: "${name_inverter} output_load_percent" bus_voltage: name: "${name_inverter} bus_voltage" battery_voltage: name: "${name_inverter} battery_voltage" battery_charging_current: name: "${name_inverter} battery_charging_current" battery_capacity_percent: name: "${name_inverter} battery_capacity_percent" inverter_heat_sink_temperature: name: "${name_inverter} inverter_heat_sink_temperature" pv_input_current_for_battery: name: "${name_inverter} pv_input_current_for_battery" pv_input_voltage: name: "${name_inverter} pv_input_voltage" battery_voltage_scc: name: "${name_inverter} battery_voltage_scc" battery_discharge_current: name: "${name_inverter} battery_discharge_current" pv_charging_power: id: inverter0_pv_charging_power name: "${name_inverter} pv_charging_power" charger_source_priority: name: "${name_inverter} charger_source_priority" - platform: total_daily_energy name: "Total Daily Energy" power_id: inverter0_ac_output_active_power filters: - multiply: 0.001 unit_of_measurement: kWh device_class: energy - platform: total_daily_energy name: "Total Daily Charging Energy" power_id: inverter0_pv_charging_power filters: - multiply: 0.001 unit_of_measurement: kWh device_class: energy text_sensor: - platform: daly_bms_ble daly_bms_ble_id: bms0 errors: name: "${name_bms} errors" - platform: pipsolar pipsolar_id: inverter0 device_mode: name: "${name_inverter} device_mode" filters: map: - P -> Power on mode - S -> Standby mode - L -> Line mode - B -> Battery mode - F -> Fault mode - D -> Shutdown mode switch: - platform: daly_bms_ble balancer: name: "${name_bms} balancer" charging: name: "${name_bms} charging" discharging: name: "${name_bms} discharging" - platform: pipsolar pipsolar_id: inverter0 output_source_priority_utility: name: "${name_inverter} output_source_priority_utility" output_source_priority_solar: name: "${name_inverter} output_source_priority_solar" output_source_priority_battery: name: "${name_inverter} output_source_priority_battery" input_voltage_range: name: "${name_inverter} input_voltage_range" pv_ok_condition_for_parallel: name: "${name_inverter} pv_ok_condition_for_parallel" pv_power_balance: name: "${name_inverter} pv_power_balance" pipsolar: uart_id: uart_0 id: inverter0 button: - platform: daly_bms_ble # Retrieves the BMS settings and prints them in the ESPHome logs retrieve_settings: name: "${name_bms} retrieve settings" # Restarts the BMS restart: name: "${name_bms} restart" # Shuts down the BMS shutdown: name: "${name_bms} shutdown" # Resets the BMS to the factory settings factory_reset: name: "${name_bms} factory reset" # Resets the BMS current to zero reset_current: name: "${name_bms} reset current" - platform: template name: "Utility First" id: utility_first internal: false on_press: then: - output.pipsolar.set_level: id: inverter0_charger_source_priority_output value: 0.0 - platform: template name: "Solar First" id: solar_first internal: false on_press: then: - output.pipsolar.set_level: id: inverter0_charger_source_priority_output value: 1.0 - platform: template name: "Solar and Utility" id: solar_and_utility internal: false on_press: then: - output.pipsolar.set_level: id: inverter0_charger_source_priority_output value: 2.0 - platform: template name: "Solar Only" id: solar_only internal: false on_press: then: - output.pipsolar.set_level: id: inverter0_charger_source_priority_output value: 3.0 output: - platform: pipsolar pipsolar_id: inverter0 battery_recharge_voltage: id: inverter0_battery_recharge_voltage_out - platform: pipsolar pipsolar_id: inverter0 charger_source_priority: id: inverter0_charger_source_priority_output select: - platform: pipsolar pipsolar_id: inverter0 current_max_charging_current: name: ${name_inverter} current_max_charging_current_select: optionsmap: "10A": "MCHGC0010" "20A": "MCHGC0020" "30A": "MCHGC0030" "40A": "MCHGC0040" statusmap: "10": "10A" "20": "20A" "30": "30A" "40": "40A" time: - platform: sntp id: my_time Il giorno gio 10 apr 2025 alle ore 09:30 Sebastian Muszynski < ***@***.***> ha scritto:

…

Please provide your complete YAML configuration. — Reply to this email directly, view it on GitHub <#163 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AWNENM57V3WDN5CRYKXSLWT2YYM2NAVCNFSM6AAAAABTPKQZH6VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENZYG44TQOA> . You are receiving this because you commented.Message ID: ***@***.***>

0 replies

Uh oh!

How to change max charging values? #163

Uh oh!

Replies: 5 comments · 5 replies

Uh oh!

Uh oh!

carmelo42 Feb 12, 2025 Author

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

Uh oh!

syssi Apr 10, 2025 Maintainer

Uh oh!

Uh oh!

Replies: 5 comments 5 replies

carmelo42
Feb 12, 2025
Author

syssi Apr 10, 2025
Maintainer