Buderus AC186i

[roboticsalign]

Dear all,

I tested the module sucessfully with a AC186i. The Manual for the original Modul helped to disassemble the device: https://www.heizman24.de/media/pdf/e0/ab/ce/InstallationsanleitungCxlg3jVB9ozvh.pdf

[sven819]

Thank you for your feedback!
Could you also provide the init log? It might offer new insights into the model-specific initialization.

[roboticsalign]

... Connected successfully
[08:34:51][D][climate:011]: 'EG Buero Klimaanlage' - Setting
[08:34:51][D][climate:015]:   Mode: HEAT
[08:34:51][D][ac_frame:412]: Sharp Frame Data: DD.0B.FB.60.C1.31.41.00.27.00.00.E4.93.E1 (14)
[08:35:02][I][safe_mode:041]: Boot seems successful; resetting boot loop counter
[08:35:02][D][esp32.preferences:114]: Saving 1 preferences to flash...
[08:35:02][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
[08:35:02][D][sharp_ac.climate:059]: NEW CONNECTION
[08:35:02][D][ac_frame:080]: Sharp INIT Data: 02.FF.FF.80.00.00.0A.01.00.D0.00.00.05.01.30.00.01.70 (18)
[08:35:02][D][ac_frame:080]: Sharp INIT Data: 02.FF.FF.81.01.00.00.80 (8)
[08:35:02][D][ac_frame:080]: Sharp INIT Data: 06
[08:35:02][D][ac_frame:080]: Sharp INIT Data: 03.FF.00.01.6C.00.00.94 (8)
[08:35:02][D][ac_frame:080]: Sharp INIT Data: 06
[08:35:02][D][ac_frame:080]: Sharp INIT Data: 03.FE.00.01.07.07.03.03.07.00.01.00.00.00.00.00.E5 (17)
[08:35:02][D][ac_frame:080]: Sharp INIT Data: 06
[08:35:02][D][ac_frame:080]: Sharp INIT Data: DC.0B.FC.72.18.21.38.00.20.00.00.00.00.F6 (14)
[08:35:02][D][climate:396]: 'EG Buero Klimaanlage' - Sending state:
[08:35:02][D][climate:399]:   Mode: HEAT
[08:35:02][D][climate:404]:   Fan Mode: AUTO
[08:35:02][D][climate:410]:   Preset: NONE
[08:35:02][D][climate:416]:   Swing Mode: OFF
[08:35:02][D][climate:419]:   Current Temperature: nan°C
[08:35:02][D][climate:425]:   Target Temperature: 24.00°C
[08:35:02][D][select:015]: 'Horizontal Vane': Sending state left (index 1)
[08:35:02][D][select:015]: 'Vertikal Vane': Sending state auto (index 0)
[08:35:02][D][switch:055]: 'Plasmacluster': Sending state OFF
[08:35:02][D][ac_frame:080]: Sharp INIT Data: 06
[08:35:02][D][ac_frame:080]: Sharp INIT Data: DC.0F.FD.72.00.00.02.00.65.1C.65.00.00.00.1B.68.2D.EA (18)
[08:35:02][D][climate:396]: 'EG Buero Klimaanlage' - Sending state:
[08:35:02][D][climate:399]:   Mode: HEAT
[08:35:02][D][climate:404]:   Fan Mode: AUTO
[08:35:02][D][climate:410]:   Preset: NONE
[08:35:02][D][climate:416]:   Swing Mode: OFF
[08:35:02][D][climate:419]:   Current Temperature: 0.00°C
[08:35:02][D][climate:425]:   Target Temperature: 24.00°C
[08:35:02][D][select:015]: 'Horizontal Vane': Sending state left (index 1)
[08:35:02][D][select:015]: 'Vertikal Vane': Sending state auto (index 0)
[08:35:02][D][ac_frame:080]: Sharp INIT Data: 06
[08:35:36][D][climate:011]: 'EG Buero Klimaanlage' - Setting
[08:35:36][D][climate:015]:   Mode: OFF
[08:35:36][D][ac_frame:412]: Sharp Frame Data: DD.0B.FB.60.C9.21.21.00.38.00.00.10.E0.1F (14)
[08:35:36][D][ac_frame:292]: Sharp Frame Data: 06
[08:36:03][D][ac_frame:292]: Sharp Frame Data: 06
[08:36:03][D][ac_frame:292]: Sharp Frame Data: DC.0F.FD.72.00.00.02.00.65.1C.65.00.00.00.1B.68.2D.EA (18)

I hope, that helps...