SPH0645: values are wrong

[Electronlibre2012]

Hello

i try your component and if i use advanced example code i have 121db and if i speak or clap my hand nothing happend.

I try the minimal sample code and i get 104db and same, not a lot of difference if i speak or clap my hand close to the mic nothing change.

I use a SPH0645 like this :

i2s:
  bck_pin: GPIO23
  ws_pin: GPIO18
  din_pin: GPIO19
  sample_rate: 48000            # default: 48000
  bits_per_sample: 32           # default: 32

any idea please why i doesnt work?

[stas-sl]

I haven't used SPH0645 myself, but most probably it is either wiring or bit depth/channels/format issue. You might need to experiment a bit with different settings. For example trying to connect L/R to GND or +3V.

Have you also used bits_shift setting?

I looked into its spec, it says data precision is 18 bits:

So you might try:

  bits_per_sample: 32 
  bits_shift: 14  # 32 - 18

# or

  bits_per_sample: 24
  bits_shift: 6 # 24 - 18

[Electronlibre2012]

thanks for your help,

bits_per_sample: 24
bits_shift: 6

give "-inf" value but

bits_per_sample: 32 
bits_shift: 14  # 32 - 18

value are still at 104db but when i clap my hand it goes to 112db max.

I already try to solder SEL to GND,

i try right now to put on 3.3V to see if something change

[Electronlibre2012]

bits_per_sample: 32 
bits_shift: 14  # 32 - 18

with SEL on 3.3v give "-inf" value, "infinite" i guess...

[Electronlibre2012]

bits_per_sample: 24
bits_shift: 6

with SEL on 3.3v give 119 db and not move.

Seems the more accurate is 32/14 with SEL on GND...

I dont understand. Must i try another value?

[Electronlibre2012]

[This shows the compatibility problem between the ESP32 I2S interface and the SPH0645LM4H microphone.](url) seems i cant do anything with this shi.... LOL

What mic do you use please? a INMP441 I2S ?

[stas-sl]

Have your read Ivan's note on SPH0645? https://hackaday.io/project/166867-esp32-i2s-slm

I guess that might be the issue. It needs specific initialisation to be applied to work correctly. And also an additional DC blocker filter, which you can add actually in config, copying coefficients from Ivan's repository. But the main issue is that I don't have that specific initialisation needed.

You might try Ivan's project to see if it outputs correct values. Or you can try forking or copying my component locally and add https://github.com/ikostoski/esp32-i2s-slm/blob/b643efa1beae51b84d4ad9b2bfa35d439c81e9b6/esp32-i2s-slm.ino#LL272C3-L277C9 those lines to i2s component setup.

[stas-sl]

Well, you found it yourself )

Yes, I'm using INMP441, but it is also a bit outdated. The best option AFAIK should be ICS 43434, but those are harder to find.

[stas-sl]

You can probably add it to config, without modifying the component, thought I haven't tried it:

esphome:
  on_boot:
    then:
      - lambda: !lambda |-
          REG_SET_BIT(I2S_TIMING_REG(0), BIT(9));   
          REG_SET_BIT(I2S_CONF_REG(0), I2S_RX_MSB_SHIFT);  

[Electronlibre2012]

You might try Ivan's project to see if it outputs correct values. Or you can try forking or copying my component locally and add https://github.com/ikostoski/esp32-i2s-slm/blob/b643efa1beae51b84d4ad9b2bfa35d439c81e9b6/esp32-i2s-slm.ino#LL272C3-L277C9 those lines to i2s component setup.

yes, buts its arduino ide...not esphome...

with your peace of code added, its 98db and doesn change anymore ...sorry, doesnt work...

Thanks

I wait for the INMP441...in 3 weeks LOL

[stas-sl]

Have you applied DC blocking filter?

As reported here https://forums.adafruit.com/viewtopic.php?f=19&p=616024, looks like the signal is shifted down by half of full scale, so when calculating RMS it will be equivalent to pretty loud sound. Instead the signal should oscillate around 0. To achieve this, DC blocking filter should be used.

Again I can't test it, but I hope those are correct filter coefficients. So the final config should be smth like this:

esphome:
  name: sound-level-meter
  on_boot:
    then:
      - lambda: !lambda |-
          REG_SET_BIT(I2S_TIMING_REG(0), BIT(9));   
          REG_SET_BIT(I2S_CONF_REG(0), I2S_RX_MSB_SHIFT);  

external_components:
  - source: github://stas-sl/esphome-sound-level-meter

esp32:
  board: esp32dev
  framework:
    type: arduino

logger:
  level: DEBUG

i2s:
  bck_pin: 23
  ws_pin: 18
  din_pin: 19
  sample_rate: 48000            
  bits_per_sample: 32           
  bits_shift: 14

sound_level_meter:
  update_interval: 1s           
  mic_sensitivity: -26dB     
  mic_sensitivity_ref: 94dB

  groups:
    - filters:
        - type: sos
          coeffs: 
            # DC-blocker
            #        b0                 b1          b2      a1    a2          
            - [1.00123377961525, -1.00123377961525, 0.0, -0.9992, 0.0]
    - sensors:
        - type: eq
          name: Leq_1s

[Electronlibre2012]

Thanks for your time and help! but it doesnt work. 98db and it moves to 101 when i clap hands...

i see some guys used 16000 as sample_rate but it doesnt change anything for me.

[Electronlibre2012]

hello i receive my inpm441

but now i have a compile error :

HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
 - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch3
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
Dependency Graph
|-- WiFi @ 2.0.0
|-- ESPmDNS @ 2.0.0
|-- Update @ 2.0.0
|-- noise-c @ 0.1.4
|   |-- libsodium @ 1.10018.1
Compiling /data/decibel-metre/.pioenvs/decibel-metre/src/esphome/components/sound_level_meter/sound_level_meter.cpp.o
Compiling /data/decibel-metre/.pioenvs/decibel-metre/src/main.cpp.o
Compiling /data/decibel-metre/.pioenvs/decibel-metre/lib64d/WiFi/WiFiSTA.cpp.o
Compiling /data/decibel-metre/.pioenvs/decibel-metre/lib64d/WiFi/WiFiScan.cpp.o
Compiling /data/decibel-metre/.pioenvs/decibel-metre/lib64d/WiFi/WiFiServer.cpp.o
Compiling /data/decibel-metre/.pioenvs/decibel-metre/lib64d/WiFi/WiFiUdp.cpp.o
src/esphome/components/sound_level_meter/sound_level_meter.cpp: In member function 'virtual void esphome::sound_level_meter::SoundLevelMeter::loop()':
src/esphome/components/sound_level_meter/sound_level_meter.cpp:60:19: error: missing template arguments before 'lock'
   std::lock_guard lock(this->defer_mutex_);
                   ^~~~
src/esphome/components/sound_level_meter/sound_level_meter.cpp: In member function 'void esphome::sound_level_meter::SoundLevelMeter::turn_on()':
src/esphome/components/sound_level_meter/sound_level_meter.cpp:69:19: error: missing template arguments before 'lock'
   std::lock_guard lock(this->on_mutex_);
                   ^~~~
src/esphome/components/sound_level_meter/sound_level_meter.cpp: In member function 'void esphome::sound_level_meter::SoundLevelMeter::turn_off()':
src/esphome/components/sound_level_meter/sound_level_meter.cpp:77:19: error: missing template arguments before 'lock'
   std::lock_guard lock(this->on_mutex_);
                   ^~~~
src/esphome/components/sound_level_meter/sound_level_meter.cpp: In static member function 'static void esphome::sound_level_meter::SoundLevelMeter::task(void*)':
src/esphome/components/sound_level_meter/sound_level_meter.cpp:105:24: error: missing template arguments before 'lock'
       std::unique_lock lock(this_->on_mutex_);
                        ^~~~
src/esphome/components/sound_level_meter/sound_level_meter.cpp:106:26: error: 'lock' was not declared in this scope
       this_->on_cv_.wait(lock, [this_] { return this_->is_on_; });
                          ^~~~
src/esphome/components/sound_level_meter/sound_level_meter.cpp:106:26: note: suggested alternative:
In file included from src/esphome/components/sound_level_meter/sound_level_meter.h:3,
                 from src/esphome/components/sound_level_meter/sound_level_meter.cpp:1:
/data/cache/platformio/packages/toolchain-xtensa-esp32/xtensa-esp32-elf/include/c++/8.4.0/mutex:542:5: note:   'std::lock'
     lock(_L1& __l1, _L2& __l2, _L3&... __l3)
     ^~~~
src/esphome/components/sound_level_meter/sound_level_meter.cpp: In member function 'void esphome::sound_level_meter::SoundLevelMeter::defer(std::function<void()>&&)':
src/esphome/components/sound_level_meter/sound_level_meter.cpp:128:19: error: missing template arguments before 'lock'
   std::lock_guard lock(this->defer_mutex_);
                   ^~~~
Compiling /data/decibel-metre/.pioenvs/decibel-metre/lib915/ESPmDNS/ESPmDNS.cpp.o
*** [/data/decibel-metre/.pioenvs/decibel-metre/src/esphome/components/sound_level_meter/sound_level_meter.cpp.o] Error 1
Compiling /data/decibel-metre/.pioenvs/decibel-metre/libbc6/Update/HttpsOTAUpdate.cpp.o
========================== [FAILED] Took 3.02 seconds ==========================

if you have an idea? thanks

[stas-sl]

Thanks for reporting it, indeed I unintentionally used newer C++ version language feature. I've just fixed code, please update and try again.

[Electronlibre2012]

thanks! i can compile but i have -inf only...

here is my code, the inmp441 is 3.3V power :

esp32:
  board: wemos_d1_mini32
  framework:
    type: arduino

external_components:
  - source: github://stas-sl/esphome-sound-level-meter

# Enable logging
logger:
  level: DEBUG

# Enable Home Assistant API
api:
  encryption:
    key: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"

ota:
  password: "xxxxxxxxxxxxxxxxxxxxxxxxxx"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_pwd
  manual_ip:
    static_ip: 192.168.1.x
    gateway: 192.168.1.1
    subnet: 255.255.255.0
    dns1: 192.168.1.1
  fast_connect: on
  power_save_mode: none


i2s:
  bck_pin: GPIO5
  ws_pin: GPIO25
  din_pin: GPIO26
  sample_rate: 48000            # default: 48000
  bits_per_sample: 32           # default: 32

  # right shift samples. 
  # for example if mic has 24 bit resolution, and
  # i2s configured as 32 bits, then audio data will be aligned left (MSB)
  # and LSB will be padded with zeros, so you might want to shift them right by 8 bits
  bits_shift: 8                 # default: 0

sound_level_meter:
  # update_interval specifies over which interval to aggregate audio data
  # you can specify default update_interval on top level, but you can also override
  # it further by specifying it on sensor level
  update_interval: 1s           # default: 60s

  # buffer_size is in samples (not bytes), so for float data type
  # number of bytes will be buffer_size * 4
  buffer_size: 1024             # default: 1024

  # see your mic datasheet to find sensitivity and reference SPL.
  # those are used to convert dB FS to db SPL
  mic_sensitivity: -26dB        # default: empty 
  mic_sensitivity_ref: 94dB     # default: empty 

  # for flexibility sensors are organized hierarchically into groups. each group
  # could have any number of filters, sensors and nested groups. 
  # for examples if there is a top level group A with filter A and nested group B
  # with filter B, then for sensors inside group B filters A and then B will be 
  # applied:
  # groups:
  #   # group A
  #   - filters:
  #       - filter A
  #     groups:
  #       # group B
  #       - filters:
  #           - filter B
  #         sensors:
  #           - sensor X
  groups:
    - sensors:
        - type: eq
          name: Leq_1s

sensor:
  - platform: internal_temperature
    name: "Internal Temperature Decibel metre"

any idea why it doesnt work please?