Best G-Helper settings for G14 2023 - GA402XZ - (7940HS+4080)

[machaltitude]

Hey G-Helper community,

I've been using G-Helper for nearly two years on my ASUS ROG Zephyrus G14 2023 (GA402XZ) with AMD Ryzen™ 9 7940HS and NVIDIA® GeForce RTX™ 4080 Laptop GPU. I'm looking for max-performance gaming setups but my current settings are giving marginal results.

If you have the exact same model (or a very similar to 2023 G14 with RTX 4080), please share your best G-Helper configurations! 🙏🏼

Please share what works for high FPS gaming + keeping things stable - want to see your CPU+GPU voltages, power limits, fan curves, overclock/undervolt settings, etc. Screenshots of your setups would be amazing. 🙌🏼

What settings you run for Balanced and for Turbo and Standard and Ultimate.

My current G-helper version is 0.226.0

Attached screenshots of my current CPU, GPU, and Advanced settings for reference:

Looking forward to your settings, Thanks!

[seerge]

@machaltitude hello,

I think you are already doing quite fine here :)

I would only advice to set a lower CPU limits, something like 35W (all 3 sliders) should be enough unless you run CPU-heavy tasks (or CPU heavy games like Valorant/CS/etc). Modern AMD CPUs are very efficient.

Also, there is a good chance that your 4080 can sustain a bit higher overclock, try to set +250 or even +300 and run 3dmark to test if it's stable. If not you can always go back.

[machaltitude]

Hey @seerge thanks for the reply!

I appreciate the suggestions but I’m a bit unsure about which sliders you’re referring to for the CPU limits - could you clarify which specific ones (like i'm 5.y.o🙌🏼) - SPL, sPPT or fPPT to set to 35W?

Also, for the overclock, are you pointing to the Core Clock Offset or Memory Clock Offset sliders? Can you be specific what slider to set to what because this is very confusing to me.

Looking forward to your input!

[seerge]

@machaltitude yes,

• Put all 3 CPU sliders, SPL/SPPT/FPPT to 35W. All 3 define CPU power limit, just for different timeframes - long time / 2 min boost / 2 sec boost
• Set GPU Core Clock offset to +250

[machaltitude]

@seerge like this?

and:

also - is the rest of the sliders here are on good settings for max performance? Plz take a look:

Cheers

[seerge]

@machaltitude yep, like that. You don't really need to set any GPU clock limits (top slider), unless you experience troubles / crashes / etc tho :)