Battery charges full when laptop goes to hibernation

[2602NAMAN]

Hello again, recently I found out that, when laptop goes to hibernation the battery tops to 100% even when charge limit set to 80%. Is this normal to happen that charge limit does not work on hibernation or anything else. Thank you for your support.

[seerge]

@2602NAMAN hello,

Most devices reset charge limit on reboot (i.e. they start charging when start booting again)
https://github.com/seerge/g-helper/wiki/FAQ#battery-charge-limiter-is-not-working

Are you sure you are not mixing things up ? Hibernation is pretty much a shutdown. So unless you start booting again - charge limit should be maintained. Just try to plug device in while it's still ON and awake

[2602NAMAN]

It works fine when hibernate and shutdown manually, led stays white. it only turns yellow when laptop goes to hibernate automatically.

[seerge]

@2602NAMAN ok, it could be a strange firmware bug then that causes limit to reset when device shuts down (hibernates) during sleep. Especially if it's same in AC.

Can you check if G-Helper logs event of such automatic hibernation in %appdadta%\GHelper\log.txt ?

[2602NAMAN]

I found nothing like that, but I want to point out one more thing that is (not related to hibernation issue). When I use Fn lock function, F6 button which was suppose to turn off the screen instead opens snipping tool and F7 increases the brightness instead of decreasing and F8 decreases the brightness instead of increasing.

log.txt

[2602NAMAN]

Here is what happen when I press those function keys-
my model is Tuf A15 FA506II

2025-09-15.23-40-03_1.mp4

[seerge]

@2602NAMAN this build should swap brightness hotkeys, some old TUF devices suffer from that
GHelper.zip

As for F6 action, vast majority of a newer devices have a print-screen / snipping tool mapped to FN+F6, so G-Helper runs it as an action when emulates (not supported by your device) fn-lock. I think it's more useful action :)