Merge remote-tracking branch 'upstream/master' into rustup

Author: flip1995

book/src/configuration.md

@@ -133,7 +133,7 @@ Very rarely, you may wish to prevent Clippy from evaluating certain sections of
 `clippy` cfg is not set. You may need to provide a stub so that the code compiles:
 
 ```rust
-#[cfg(not(clippy)]
+#[cfg(not(clippy))]
 include!(concat!(env!("OUT_DIR"), "/my_big_function-generated.rs"));
 
 #[cfg(clippy)]

book/src/development/adding_lints.md

@@ -587,6 +587,11 @@ declare_clippy_lint! {
 }
 ```
 
+If the lint is in the `restriction` group because it lints things that are not
+necessarily “bad” but are more of a style choice, then replace the
+“Why is this bad?” section heading with “Why restrict this?”, to avoid writing
+“Why is this bad? It isn't, but ...”.
+
 Once your lint is merged, this documentation will show up in the [lint
 list][lint_list].
 

clippy_dev/src/new_lint.rs

@@ -331,12 +331,17 @@ fn get_lint_file_contents(lint: &LintData<'_>, enable_msrv: bool) -> String {
 }
 
 fn get_lint_declaration(name_upper: &str, category: &str) -> String {
+    let justification_heading = if category == "restriction" {
+        "Why restrict this?"
+    } else {
+        "Why is this bad?"
+    };
     formatdoc!(
         r#"
             declare_clippy_lint! {{
                 /// ### What it does
                 ///
-                /// ### Why is this bad?
+                /// ### {justification_heading}
                 ///
                 /// ### Example
                 /// ```no_run

clippy_lints/src/absolute_paths.rs

@@ -12,7 +12,7 @@ declare_clippy_lint! {
     /// ### What it does
     /// Checks for usage of items through absolute paths, like `std::env::current_dir`.
     ///
-    /// ### Why is this bad?
+    /// ### Why restrict this?
     /// Many codebases have their own style when it comes to importing, but one that is seldom used
     /// is using absolute paths *everywhere*. This is generally considered unidiomatic, and you
     /// should add a `use` statement.

clippy_lints/src/allow_attributes.rs

@@ -19,10 +19,11 @@ declare_clippy_lint! {
     /// This lint only warns outer attributes (`#[allow]`), as inner attributes
     /// (`#![allow]`) are usually used to enable or disable lints on a global scale.
     ///
-    /// ### Why is this bad?
-    /// `#[expect]` attributes suppress the lint emission, but emit a warning, if
+    /// ### Why restrict this?
+    /// `#[allow]` attributes can linger after their reason for existence is gone.
+    /// `#[expect]` attributes suppress the lint emission, but emit a warning if
     /// the expectation is unfulfilled. This can be useful to be notified when the
-    /// lint is no longer triggered.
+    /// lint is no longer triggered, which may indicate the attribute can be removed.
     ///
     /// ### Example
     /// ```rust,ignore

clippy_lints/src/as_conversions.rs

@@ -17,7 +17,7 @@ declare_clippy_lint! {
     /// There is a good explanation the reason why this lint should work in this way and how it is useful
     /// [in this issue](https://github.com/rust-lang/rust-clippy/issues/5122).
     ///
-    /// ### Why is this bad?
+    /// ### Why restrict this?
     /// `as` conversions will perform many kinds of
     /// conversions, including silently lossy conversions and dangerous coercions.
     /// There are cases when it makes sense to use `as`, so the lint is

clippy_lints/src/asm_syntax.rs

@@ -65,9 +65,8 @@ declare_clippy_lint! {
     /// ### What it does
     /// Checks for usage of Intel x86 assembly syntax.
     ///
-    /// ### Why is this bad?
-    /// The lint has been enabled to indicate a preference
-    /// for AT&T x86 assembly syntax.
+    /// ### Why restrict this?
+    /// To enforce consistent use of AT&T x86 assembly syntax.
     ///
     /// ### Example
     ///
@@ -114,9 +113,8 @@ declare_clippy_lint! {
     /// ### What it does
     /// Checks for usage of AT&T x86 assembly syntax.
     ///
-    /// ### Why is this bad?
-    /// The lint has been enabled to indicate a preference
-    /// for Intel x86 assembly syntax.
+    /// ### Why restrict this?
+    /// To enforce consistent use of Intel x86 assembly syntax.
     ///
     /// ### Example
     ///

clippy_lints/src/assertions_on_result_states.rs

@@ -16,23 +16,33 @@ declare_clippy_lint! {
     /// ### What it does
     /// Checks for `assert!(r.is_ok())` or `assert!(r.is_err())` calls.
     ///
-    /// ### Why is this bad?
-    /// An assertion failure cannot output an useful message of the error.
+    /// ### Why restrict this?
+    /// This form of assertion does not show any of the information present in the `Result`
+    /// other than which variant it isn’t.
     ///
     /// ### Known problems
     /// The suggested replacement decreases the readability of code and log output.
     ///
     /// ### Example
-    /// ```rust,ignore
+    /// ```rust,no_run
     /// # let r = Ok::<_, ()>(());
     /// assert!(r.is_ok());
-    /// # let r = Err::<_, ()>(());
+    /// # let r = Err::<(), _>(());
     /// assert!(r.is_err());
     /// ```
+    ///
+    /// Use instead:
+    ///
+    /// ```rust,no_run
+    /// # let r = Ok::<_, ()>(());
+    /// r.unwrap();
+    /// # let r = Err::<(), _>(());
+    /// r.unwrap_err();
+    /// ```
     #[clippy::version = "1.64.0"]
     pub ASSERTIONS_ON_RESULT_STATES,
     restriction,
-    "`assert!(r.is_ok())`/`assert!(r.is_err())` gives worse error message than directly calling `r.unwrap()`/`r.unwrap_err()`"
+    "`assert!(r.is_ok())` or `assert!(r.is_err())` gives worse panic messages than directly calling `r.unwrap()` or `r.unwrap_err()`"
 }
 
 declare_lint_pass!(AssertionsOnResultStates => [ASSERTIONS_ON_RESULT_STATES]);

clippy_lints/src/attrs/mod.rs

@@ -309,9 +309,9 @@ declare_clippy_lint! {
     ///
     /// (This requires the `lint_reasons` feature)
     ///
-    /// ### Why is this bad?
-    /// Allowing a lint should always have a reason. This reason should be documented to
-    /// ensure that others understand the reasoning
+    /// ### Why restrict this?
+    /// Justifying each `allow` helps readers understand the reasoning,
+    /// and may allow removing `allow` attributes if their purpose is obsolete.
     ///
     /// ### Example
     /// ```no_run

clippy_lints/src/casts/mod.rs

@@ -303,7 +303,7 @@ declare_clippy_lint! {
     /// ### What it does
     /// Checks for casts of a function pointer to any integer type.
     ///
-    /// ### Why is this bad?
+    /// ### Why restrict this?
     /// Casting a function pointer to an integer can have surprising results and can occur
     /// accidentally if parentheses are omitted from a function call. If you aren't doing anything
     /// low-level with function pointers then you can opt-out of casting functions to integers in
@@ -535,8 +535,8 @@ declare_clippy_lint! {
     /// ### What it does
     /// Checks for the usage of `as _` conversion using inferred type.
     ///
-    /// ### Why is this bad?
-    /// The conversion might include lossy conversion and dangerous cast that might go
+    /// ### Why restrict this?
+    /// The conversion might include lossy conversion or a dangerous cast that might go
     /// undetected due to the type being inferred.
     ///
     /// The lint is allowed by default as using `_` is less wordy than always specifying the type.