recalbox 6.0-DragonBlaze /recalbox 4.1 gpio buttons do not work at zero but work at pi3

[DRAgon734465502]

I have try mk_arcade_joystick_rpi at the newest recalbox 4.1

I active the GPIO buttons by this code

nano /recalbox/share/system/recalbox.conf

controllers.gpio.enabled=1
controllers.gpio.args=map=5 gpio=5,6,16,13,26,19,21,20,14,12,15,23,3

this work at pi3/3B+ but do not work at zero/zero W
anyone have some problem ??

thinks

[ian57]

what are the symptoms ? what does evtest reply? Be careful if you activated sounds on the gpio.. gpio 13 is used for PWN sound output because pizero has no analog output for sound.

Please tell us more .

[DRAgon734465502]

Yes I use PWM audio out
nano /boot/config.txt
dtoverlay=pwm

I have enabled GPIO LCD and can display OK
LCD code
nano /boot/config.txt
dtparam=spi=on
dtoverlay=pwm
hdmi_force_hotplug=1
hdmi_cvt=480 480 60 1 0 0 0
hdmi_group=2
hdmi_mode=87

nano /etc/modules.conf
flexfb
fbtft_device
nano /etc/modprobe.d/fbtft.conf
options flexfb setaddrwin=0 buswidth=8 width=240 height=240 init=-1,0x11.. -1,0x29,-3
options fbtft_device debug=3 bgr=1 fps=60 custom=1rotate=90 name=flexfb speed=64000000 gpios=reset:27,dc:25,led:24

nano /etc/init.d/rcS
fbcp &

Then GPIO buttons config at recalbox.conf
system.fbcp.enabled=0

controllers.gpio.enabled=1
controllers.gpio.args=map=5 gpio=5,6,16,13,26,19,21,20,14,12,15,23,3

global.videomode=default
global.ratio=1/1

[DRAgon734465502]

this is all code , which work fine at PI3

But at zero, jsut display and audio work , the GPIO buttons do not work,
press the buttons do not work

[ian57]

First : which release of Recalbox?
second : try to deactivate pwm to see if it is in cause. comment #dtoverlay=pwm in confit.txt

[DRAgon734465502]

recalbox 6.0-DragonBlaze
uname -a
show linux 4.1

[DRAgon734465502]

active the GPIO buttons by this code

nano /recalbox/share/system/recalbox.conf
controllers.gpio.enabled=1
controllers.gpio.args=map=5 gpio=5,6,16,13,26,19,21,20,14,12,15,23,3

which will make recalbox starting first desktop

[DRAgon734465502]

Do not add that code , it is like this picture
http://ae01.alicdn.com/kf/HTB1dlCnXRWD3KVjSZKPq6yp7FXan.jpg

after adding that code , it is like this picture
http://ae01.alicdn.com/kf/HTB1M_KnXSWD3KVjSZSgq6ACxVXab.jpg

[DRAgon734465502]

I do not why the first starting have been changed from favorites to AMSTRRAD when active the gpio buttons

[ian57]

are the controls working properly ? did you try to deactivate pwm?

[DRAgon734465502]

I do not active PWM audio output and GPIO LCD and just active GPIO buttons ,
Then I find the first starting have been changed from favorites to AMSTRRAD
After I disable GPIO buttons, the first starting have gone back to favorites

[DRAgon734465502]

controls all do not work , I have tried to activate pwm or deactivate pwm . same result

I also change two raspberry pi zero , same ..

[DRAgon734465502]

the PI3 iamge and zero image from here
https://archive.recalbox.com/

PI3 can work fine .
zero will work like that .

which is bug at recalbox for pi0 ???

[ian57]

ok seems to be a bug. need to make some test on my own to confirm.

[DRAgon734465502]

after I change controllers.gpio.args=map=5 gpio=5,6,16,13,26,19,21,20,14,12,15,23,3
to controllers.gpio.args=map=4 ..

make "5" to "4" the first starting have been changed to this automatically
http://ae01.alicdn.com/kf/HTB1VUqpXQ9E3KVjSZFrq6y0UVXav.jpg

But all gpio controls still do not work

[DRAgon734465502]

which show "gamepad 1" "input require"
but the app can not check gpio buttons