Enclosure for the controller

[M1G039]

Hello! Your controller looks amazing, thanks for sharing! I started building one some time ago but got stuck on designing an enclosure for it. Your design is really nice so I wanted to make it look similar for my controller. Can you share some more details on how you built yours? Especially the slider layers. Could you share the dimensions of the acrylic sheets you cut?

[ravinrabbid]

Hi!
The enclosure still lives in a very convoluted Fusion360 project, needs a lot of additional 3d printed parts and is very fiddly to build. I've not yet found the time to clean it up and make it public.

Some general information which might help you:

• For dimensions of the top plate and slider, have a look at https://github.com/ravinrabbid/DivaCon2040/tree/main/artwork. The SVGs are to scale and should have the correct measurements if you open them in Inkscape.
• The general slider construction is described in https://github.com/ravinrabbid/DivaCon2040?tab=readme-ov-file#construction, let me know if there is something missing.
• Height is about 12cm, but can probably made slimmer.
• Everything is held together by 20mm aluminium profiles.

If the are any further specifics you want to know, don't hesitate to ask!