diff --git a/Runner/suites/Kernel/FunctionalArea/baseport/USBHost/README.md b/Runner/suites/Kernel/FunctionalArea/baseport/USBHost/README.md
new file mode 100644
index 00000000..aa5937d7
--- /dev/null
+++ b/Runner/suites/Kernel/FunctionalArea/baseport/USBHost/README.md
@@ -0,0 +1,27 @@
+```
+Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+SPDX-License-Identifier: BSD-3-Clause-Clear
+```
+
+# USB Host Mode Validation
+
+## Overview
+
+This shell script executes on the DUT (Device-Under-Test) and verifies enumeration of connected USB devices.
+
+---
+
+## Setup
+
+- Connect USB peripheral(s) to USB port(s) on DUT.
+- Only applicable for USB ports that support Host Mode functionality. 
+- USB peripherals examples: Mass Storage devices (pendrives, SSD, hard drives, etc.), HID devices (Mouse, Keyboard, USB headset, USB camera, etc.) 
+
+---
+
+## License
+
+```
+Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.  
+SPDX-License-Identifier: BSD-3-Clause-Clear
+```
diff --git a/Runner/suites/Kernel/FunctionalArea/baseport/USBHost/run.sh b/Runner/suites/Kernel/FunctionalArea/baseport/USBHost/run.sh
new file mode 100644
index 00000000..d60e8f02
--- /dev/null
+++ b/Runner/suites/Kernel/FunctionalArea/baseport/USBHost/run.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+
+# Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+# SPDX-License-Identifier: BSD-3-Clause-Clear
+
+#Setup requires at least one USB peripheral connected to USB port that supports Host mode function
+
+# Import test suite definitions
+. "${PWD}"/init_env
+TESTNAME="USBHost"
+
+#import test functions library
+. "${TOOLS}"/functestlib.sh
+test_path=$(find_test_case_by_name "$TESTNAME")
+log_info "-----------------------------------------------------------------------------------------"
+log_info "-------------------Starting $TESTNAME Testcase----------------------------"
+
+log_info "Running USB Host enumeration test"
+
+# Check if lsusb is installed
+check_dependencies lsusb
+
+# Run lsusb and capture output
+usb_output=$(lsusb)
+device_count=$(echo "$usb_output" | wc -l)
+
+# Filter out USB hubs
+non_hub_count=$(echo "$usb_output" | grep -vi "hub" | wc -l)
+
+echo "Enumerated USB devices..."
+echo "$usb_output"
+
+# Check if any USB devices were found
+if [ "$device_count" -eq 0 ]; then
+    log_fail "$TESTNAME : Test Failed - No USB devices found."
+    echo "$TESTNAME FAIL" > $test_path/$TESTNAME.res
+elif [ "$non_hub_count" -eq 0 ]; then
+    log_fail "$TESTNAME : Test Failed - Only USB hubs detected, no functional USB devices."
+    echo "$TESTNAME FAIL" > $test_path/$TESTNAME.res
+else
+    log_pass "$TESTNAME : Test Passed - $non_hub_count non-hub USB device(s) found."
+    echo "$TESTNAME PASS" > $test_path/$TESTNAME.res
+fi
+
+log_info "-------------------Completed $TESTNAME Testcase----------------------------"
\ No newline at end of file